1 | //===- llvm/CodeGen/AsmPrinter/DbgEntityHistoryCalculator.cpp -------------===// |
2 | // |
3 | // Part of the LLVM Project, under the Apache License v2.0 with LLVM Exceptions. |
4 | // See https://llvm.org/LICENSE.txt for license information. |
5 | // SPDX-License-Identifier: Apache-2.0 WITH LLVM-exception |
6 | // |
7 | //===----------------------------------------------------------------------===// |
8 | |
9 | #include "llvm/CodeGen/DbgEntityHistoryCalculator.h" |
10 | #include "llvm/ADT/STLExtras.h" |
11 | #include "llvm/ADT/SmallSet.h" |
12 | #include "llvm/ADT/SmallVector.h" |
13 | #include "llvm/CodeGen/LexicalScopes.h" |
14 | #include "llvm/CodeGen/MachineBasicBlock.h" |
15 | #include "llvm/CodeGen/MachineFunction.h" |
16 | #include "llvm/CodeGen/MachineInstr.h" |
17 | #include "llvm/CodeGen/MachineOperand.h" |
18 | #include "llvm/CodeGen/TargetLowering.h" |
19 | #include "llvm/CodeGen/TargetRegisterInfo.h" |
20 | #include "llvm/CodeGen/TargetSubtargetInfo.h" |
21 | #include "llvm/IR/DebugInfoMetadata.h" |
22 | #include "llvm/IR/DebugLoc.h" |
23 | #include "llvm/MC/MCRegisterInfo.h" |
24 | #include "llvm/Support/Debug.h" |
25 | #include "llvm/Support/raw_ostream.h" |
26 | #include <cassert> |
27 | #include <map> |
28 | #include <optional> |
29 | #include <utility> |
30 | |
31 | using namespace llvm; |
32 | |
33 | #define DEBUG_TYPE "dwarfdebug" |
34 | |
35 | namespace { |
36 | using EntryIndex = DbgValueHistoryMap::EntryIndex; |
37 | } |
38 | |
39 | void InstructionOrdering::initialize(const MachineFunction &MF) { |
40 | // We give meta instructions the same ordinal as the preceding instruction |
41 | // because this class is written for the task of comparing positions of |
42 | // variable location ranges against scope ranges. To reflect what we'll see |
43 | // in the binary, when we look at location ranges we must consider all |
44 | // DBG_VALUEs between two real instructions at the same position. And a |
45 | // scope range which ends on a meta instruction should be considered to end |
46 | // at the last seen real instruction. E.g. |
47 | // |
48 | // 1 instruction p Both the variable location for x and for y start |
49 | // 1 DBG_VALUE for "x" after instruction p so we give them all the same |
50 | // 1 DBG_VALUE for "y" number. If a scope range ends at DBG_VALUE for "y", |
51 | // 2 instruction q we should treat it as ending after instruction p |
52 | // because it will be the last real instruction in the |
53 | // range. DBG_VALUEs at or after this position for |
54 | // variables declared in the scope will have no effect. |
55 | clear(); |
56 | unsigned Position = 0; |
57 | for (const MachineBasicBlock &MBB : MF) |
58 | for (const MachineInstr &MI : MBB) |
59 | InstNumberMap[&MI] = MI.isMetaInstruction() ? Position : ++Position; |
60 | } |
61 | |
62 | bool InstructionOrdering::isBefore(const MachineInstr *A, |
63 | const MachineInstr *B) const { |
64 | assert(A->getParent() && B->getParent() && "Operands must have a parent" ); |
65 | assert(A->getMF() == B->getMF() && |
66 | "Operands must be in the same MachineFunction" ); |
67 | return InstNumberMap.lookup(Val: A) < InstNumberMap.lookup(Val: B); |
68 | } |
69 | |
70 | bool DbgValueHistoryMap::startDbgValue(InlinedEntity Var, |
71 | const MachineInstr &MI, |
72 | EntryIndex &NewIndex) { |
73 | // Instruction range should start with a DBG_VALUE instruction for the |
74 | // variable. |
75 | assert(MI.isDebugValue() && "not a DBG_VALUE" ); |
76 | auto &Entries = VarEntries[Var]; |
77 | if (!Entries.empty() && Entries.back().isDbgValue() && |
78 | !Entries.back().isClosed() && |
79 | Entries.back().getInstr()->isEquivalentDbgInstr(Other: MI)) { |
80 | LLVM_DEBUG(dbgs() << "Coalescing identical DBG_VALUE entries:\n" |
81 | << "\t" << Entries.back().getInstr() << "\t" << MI |
82 | << "\n" ); |
83 | return false; |
84 | } |
85 | Entries.emplace_back(Args: &MI, Args: Entry::DbgValue); |
86 | NewIndex = Entries.size() - 1; |
87 | return true; |
88 | } |
89 | |
90 | EntryIndex DbgValueHistoryMap::startClobber(InlinedEntity Var, |
91 | const MachineInstr &MI) { |
92 | auto &Entries = VarEntries[Var]; |
93 | // If an instruction clobbers multiple registers that the variable is |
94 | // described by, then we may have already created a clobbering instruction. |
95 | if (Entries.back().isClobber() && Entries.back().getInstr() == &MI) |
96 | return Entries.size() - 1; |
97 | Entries.emplace_back(Args: &MI, Args: Entry::Clobber); |
98 | return Entries.size() - 1; |
99 | } |
100 | |
101 | void DbgValueHistoryMap::Entry::endEntry(EntryIndex Index) { |
102 | // For now, instruction ranges are not allowed to cross basic block |
103 | // boundaries. |
104 | assert(isDbgValue() && "Setting end index for non-debug value" ); |
105 | assert(!isClosed() && "End index has already been set" ); |
106 | EndIndex = Index; |
107 | } |
108 | |
109 | /// Check if the instruction range [StartMI, EndMI] intersects any instruction |
110 | /// range in Ranges. EndMI can be nullptr to indicate that the range is |
111 | /// unbounded. Assumes Ranges is ordered and disjoint. Returns true and points |
112 | /// to the first intersecting scope range if one exists. |
113 | static std::optional<ArrayRef<InsnRange>::iterator> |
114 | intersects(const MachineInstr *StartMI, const MachineInstr *EndMI, |
115 | const ArrayRef<InsnRange> &Ranges, |
116 | const InstructionOrdering &Ordering) { |
117 | for (auto RangesI = Ranges.begin(), RangesE = Ranges.end(); |
118 | RangesI != RangesE; ++RangesI) { |
119 | if (EndMI && Ordering.isBefore(A: EndMI, B: RangesI->first)) |
120 | return std::nullopt; |
121 | if (EndMI && !Ordering.isBefore(A: RangesI->second, B: EndMI)) |
122 | return RangesI; |
123 | if (Ordering.isBefore(A: StartMI, B: RangesI->second)) |
124 | return RangesI; |
125 | } |
126 | return std::nullopt; |
127 | } |
128 | |
129 | void DbgValueHistoryMap::trimLocationRanges( |
130 | const MachineFunction &MF, LexicalScopes &LScopes, |
131 | const InstructionOrdering &Ordering) { |
132 | // The indices of the entries we're going to remove for each variable. |
133 | SmallVector<EntryIndex, 4> ToRemove; |
134 | // Entry reference count for each variable. Clobbers left with no references |
135 | // will be removed. |
136 | SmallVector<int, 4> ReferenceCount; |
137 | // Entries reference other entries by index. Offsets is used to remap these |
138 | // references if any entries are removed. |
139 | SmallVector<size_t, 4> Offsets; |
140 | |
141 | LLVM_DEBUG(dbgs() << "Trimming location ranges for function '" << MF.getName() |
142 | << "'\n" ); |
143 | |
144 | for (auto &Record : VarEntries) { |
145 | auto &HistoryMapEntries = Record.second; |
146 | if (HistoryMapEntries.empty()) |
147 | continue; |
148 | |
149 | InlinedEntity Entity = Record.first; |
150 | const DILocalVariable *LocalVar = cast<DILocalVariable>(Val: Entity.first); |
151 | |
152 | LexicalScope *Scope = nullptr; |
153 | if (const DILocation *InlinedAt = Entity.second) { |
154 | Scope = LScopes.findInlinedScope(N: LocalVar->getScope(), IA: InlinedAt); |
155 | } else { |
156 | Scope = LScopes.findLexicalScope(N: LocalVar->getScope()); |
157 | // Ignore variables for non-inlined function level scopes. The scope |
158 | // ranges (from scope->getRanges()) will not include any instructions |
159 | // before the first one with a debug-location, which could cause us to |
160 | // incorrectly drop a location. We could introduce special casing for |
161 | // these variables, but it doesn't seem worth it because no out-of-scope |
162 | // locations have been observed for variables declared in function level |
163 | // scopes. |
164 | if (Scope && |
165 | (Scope->getScopeNode() == Scope->getScopeNode()->getSubprogram()) && |
166 | (Scope->getScopeNode() == LocalVar->getScope())) |
167 | continue; |
168 | } |
169 | |
170 | // If there is no scope for the variable then something has probably gone |
171 | // wrong. |
172 | if (!Scope) |
173 | continue; |
174 | |
175 | ToRemove.clear(); |
176 | // Zero the reference counts. |
177 | ReferenceCount.assign(NumElts: HistoryMapEntries.size(), Elt: 0); |
178 | // Index of the DBG_VALUE which marks the start of the current location |
179 | // range. |
180 | EntryIndex StartIndex = 0; |
181 | ArrayRef<InsnRange> ScopeRanges(Scope->getRanges()); |
182 | for (auto EI = HistoryMapEntries.begin(), EE = HistoryMapEntries.end(); |
183 | EI != EE; ++EI, ++StartIndex) { |
184 | // Only DBG_VALUEs can open location ranges so skip anything else. |
185 | if (!EI->isDbgValue()) |
186 | continue; |
187 | |
188 | // Index of the entry which closes this range. |
189 | EntryIndex EndIndex = EI->getEndIndex(); |
190 | // If this range is closed bump the reference count of the closing entry. |
191 | if (EndIndex != NoEntry) |
192 | ReferenceCount[EndIndex] += 1; |
193 | // Skip this location range if the opening entry is still referenced. It |
194 | // may close a location range which intersects a scope range. |
195 | // TODO: We could be 'smarter' and trim these kinds of ranges such that |
196 | // they do not leak out of the scope ranges if they partially overlap. |
197 | if (ReferenceCount[StartIndex] > 0) |
198 | continue; |
199 | |
200 | const MachineInstr *StartMI = EI->getInstr(); |
201 | const MachineInstr *EndMI = EndIndex != NoEntry |
202 | ? HistoryMapEntries[EndIndex].getInstr() |
203 | : nullptr; |
204 | // Check if the location range [StartMI, EndMI] intersects with any scope |
205 | // range for the variable. |
206 | if (auto R = intersects(StartMI, EndMI, Ranges: ScopeRanges, Ordering)) { |
207 | // Adjust ScopeRanges to exclude ranges which subsequent location ranges |
208 | // cannot possibly intersect. |
209 | ScopeRanges = ArrayRef<InsnRange>(*R, ScopeRanges.end()); |
210 | } else { |
211 | // If the location range does not intersect any scope range then the |
212 | // DBG_VALUE which opened this location range is usless, mark it for |
213 | // removal. |
214 | ToRemove.push_back(Elt: StartIndex); |
215 | // Because we'll be removing this entry we need to update the reference |
216 | // count of the closing entry, if one exists. |
217 | if (EndIndex != NoEntry) |
218 | ReferenceCount[EndIndex] -= 1; |
219 | LLVM_DEBUG(dbgs() << "Dropping value outside scope range of variable: " ; |
220 | StartMI->print(llvm::dbgs());); |
221 | } |
222 | } |
223 | |
224 | // If there is nothing to remove then jump to next variable. |
225 | if (ToRemove.empty()) |
226 | continue; |
227 | |
228 | // Mark clobbers that will no longer close any location ranges for removal. |
229 | for (size_t i = 0; i < HistoryMapEntries.size(); ++i) |
230 | if (ReferenceCount[i] <= 0 && HistoryMapEntries[i].isClobber()) |
231 | ToRemove.push_back(Elt: i); |
232 | |
233 | llvm::sort(C&: ToRemove); |
234 | |
235 | // Build an offset map so we can update the EndIndex of the remaining |
236 | // entries. |
237 | // Zero the offsets. |
238 | Offsets.assign(NumElts: HistoryMapEntries.size(), Elt: 0); |
239 | size_t CurOffset = 0; |
240 | auto ToRemoveItr = ToRemove.begin(); |
241 | for (size_t EntryIdx = *ToRemoveItr; EntryIdx < HistoryMapEntries.size(); |
242 | ++EntryIdx) { |
243 | // Check if this is an entry which will be removed. |
244 | if (ToRemoveItr != ToRemove.end() && *ToRemoveItr == EntryIdx) { |
245 | ++ToRemoveItr; |
246 | ++CurOffset; |
247 | } |
248 | Offsets[EntryIdx] = CurOffset; |
249 | } |
250 | |
251 | // Update the EndIndex of the entries to account for those which will be |
252 | // removed. |
253 | for (auto &Entry : HistoryMapEntries) |
254 | if (Entry.isClosed()) |
255 | Entry.EndIndex -= Offsets[Entry.EndIndex]; |
256 | |
257 | // Now actually remove the entries. Iterate backwards so that our remaining |
258 | // ToRemove indices are valid after each erase. |
259 | for (EntryIndex Idx : llvm::reverse(C&: ToRemove)) |
260 | HistoryMapEntries.erase(CI: HistoryMapEntries.begin() + Idx); |
261 | LLVM_DEBUG(llvm::dbgs() << "New HistoryMap('" << LocalVar->getName() |
262 | << "') size: " << HistoryMapEntries.size() << "\n" ); |
263 | } |
264 | } |
265 | |
266 | bool DbgValueHistoryMap::hasNonEmptyLocation(const Entries &Entries) const { |
267 | for (const auto &Entry : Entries) { |
268 | if (!Entry.isDbgValue()) |
269 | continue; |
270 | |
271 | const MachineInstr *MI = Entry.getInstr(); |
272 | assert(MI->isDebugValue()); |
273 | // A DBG_VALUE $noreg is an empty variable location |
274 | if (MI->isUndefDebugValue()) |
275 | continue; |
276 | |
277 | return true; |
278 | } |
279 | |
280 | return false; |
281 | } |
282 | |
283 | void DbgLabelInstrMap::addInstr(InlinedEntity Label, const MachineInstr &MI) { |
284 | assert(MI.isDebugLabel() && "not a DBG_LABEL" ); |
285 | LabelInstr[Label] = &MI; |
286 | } |
287 | |
288 | namespace { |
289 | |
290 | // Maps physreg numbers to the variables they describe. |
291 | using InlinedEntity = DbgValueHistoryMap::InlinedEntity; |
292 | using RegDescribedVarsMap = std::map<unsigned, SmallVector<InlinedEntity, 1>>; |
293 | |
294 | // Keeps track of the debug value entries that are currently live for each |
295 | // inlined entity. As the history map entries are stored in a SmallVector, they |
296 | // may be moved at insertion of new entries, so store indices rather than |
297 | // pointers. |
298 | using DbgValueEntriesMap = std::map<InlinedEntity, SmallSet<EntryIndex, 1>>; |
299 | |
300 | } // end anonymous namespace |
301 | |
302 | // Claim that @Var is not described by @RegNo anymore. |
303 | static void dropRegDescribedVar(RegDescribedVarsMap &RegVars, unsigned RegNo, |
304 | InlinedEntity Var) { |
305 | const auto &I = RegVars.find(x: RegNo); |
306 | assert(RegNo != 0U && I != RegVars.end()); |
307 | auto &VarSet = I->second; |
308 | const auto &VarPos = llvm::find(Range&: VarSet, Val: Var); |
309 | assert(VarPos != VarSet.end()); |
310 | VarSet.erase(CI: VarPos); |
311 | // Don't keep empty sets in a map to keep it as small as possible. |
312 | if (VarSet.empty()) |
313 | RegVars.erase(position: I); |
314 | } |
315 | |
316 | // Claim that @Var is now described by @RegNo. |
317 | static void addRegDescribedVar(RegDescribedVarsMap &RegVars, unsigned RegNo, |
318 | InlinedEntity Var) { |
319 | assert(RegNo != 0U); |
320 | auto &VarSet = RegVars[RegNo]; |
321 | assert(!is_contained(VarSet, Var)); |
322 | VarSet.push_back(Elt: Var); |
323 | } |
324 | |
325 | /// Create a clobbering entry and end all open debug value entries |
326 | /// for \p Var that are described by \p RegNo using that entry. Inserts into \p |
327 | /// FellowRegisters the set of Registers that were also used to describe \p Var |
328 | /// alongside \p RegNo. |
329 | static void clobberRegEntries(InlinedEntity Var, unsigned RegNo, |
330 | const MachineInstr &ClobberingInstr, |
331 | DbgValueEntriesMap &LiveEntries, |
332 | DbgValueHistoryMap &HistMap, |
333 | SmallVectorImpl<Register> &FellowRegisters) { |
334 | EntryIndex ClobberIndex = HistMap.startClobber(Var, MI: ClobberingInstr); |
335 | // Close all entries whose values are described by the register. |
336 | SmallVector<EntryIndex, 4> IndicesToErase; |
337 | // If a given register appears in a live DBG_VALUE_LIST for Var alongside the |
338 | // clobbered register, and never appears in a live DBG_VALUE* for Var without |
339 | // the clobbered register, then it is no longer linked to the variable. |
340 | SmallSet<Register, 4> MaybeRemovedRegisters; |
341 | SmallSet<Register, 4> KeepRegisters; |
342 | for (auto Index : LiveEntries[Var]) { |
343 | auto &Entry = HistMap.getEntry(Var, Index); |
344 | assert(Entry.isDbgValue() && "Not a DBG_VALUE in LiveEntries" ); |
345 | if (Entry.getInstr()->isDebugEntryValue()) |
346 | continue; |
347 | if (Entry.getInstr()->hasDebugOperandForReg(Reg: RegNo)) { |
348 | IndicesToErase.push_back(Elt: Index); |
349 | Entry.endEntry(Index: ClobberIndex); |
350 | for (const auto &MO : Entry.getInstr()->debug_operands()) |
351 | if (MO.isReg() && MO.getReg() && MO.getReg() != RegNo) |
352 | MaybeRemovedRegisters.insert(V: MO.getReg()); |
353 | } else { |
354 | for (const auto &MO : Entry.getInstr()->debug_operands()) |
355 | if (MO.isReg() && MO.getReg()) |
356 | KeepRegisters.insert(V: MO.getReg()); |
357 | } |
358 | } |
359 | |
360 | for (Register Reg : MaybeRemovedRegisters) |
361 | if (!KeepRegisters.contains(V: Reg)) |
362 | FellowRegisters.push_back(Elt: Reg); |
363 | |
364 | // Drop all entries that have ended. |
365 | for (auto Index : IndicesToErase) |
366 | LiveEntries[Var].erase(V: Index); |
367 | } |
368 | |
369 | /// Add a new debug value for \p Var. Closes all overlapping debug values. |
370 | static void handleNewDebugValue(InlinedEntity Var, const MachineInstr &DV, |
371 | RegDescribedVarsMap &RegVars, |
372 | DbgValueEntriesMap &LiveEntries, |
373 | DbgValueHistoryMap &HistMap) { |
374 | EntryIndex NewIndex; |
375 | if (HistMap.startDbgValue(Var, MI: DV, NewIndex)) { |
376 | SmallDenseMap<unsigned, bool, 4> TrackedRegs; |
377 | |
378 | // If we have created a new debug value entry, close all preceding |
379 | // live entries that overlap. |
380 | SmallVector<EntryIndex, 4> IndicesToErase; |
381 | const DIExpression *DIExpr = DV.getDebugExpression(); |
382 | for (auto Index : LiveEntries[Var]) { |
383 | auto &Entry = HistMap.getEntry(Var, Index); |
384 | assert(Entry.isDbgValue() && "Not a DBG_VALUE in LiveEntries" ); |
385 | const MachineInstr &DV = *Entry.getInstr(); |
386 | bool Overlaps = DIExpr->fragmentsOverlap(Other: DV.getDebugExpression()); |
387 | if (Overlaps) { |
388 | IndicesToErase.push_back(Elt: Index); |
389 | Entry.endEntry(Index: NewIndex); |
390 | } |
391 | if (!DV.isDebugEntryValue()) |
392 | for (const MachineOperand &Op : DV.debug_operands()) |
393 | if (Op.isReg() && Op.getReg()) |
394 | TrackedRegs[Op.getReg()] |= !Overlaps; |
395 | } |
396 | |
397 | // If the new debug value is described by a register, add tracking of |
398 | // that register if it is not already tracked. |
399 | if (!DV.isDebugEntryValue()) { |
400 | for (const MachineOperand &Op : DV.debug_operands()) { |
401 | if (Op.isReg() && Op.getReg()) { |
402 | Register NewReg = Op.getReg(); |
403 | if (!TrackedRegs.count(Val: NewReg)) |
404 | addRegDescribedVar(RegVars, RegNo: NewReg, Var); |
405 | LiveEntries[Var].insert(V: NewIndex); |
406 | TrackedRegs[NewReg] = true; |
407 | } |
408 | } |
409 | } |
410 | |
411 | // Drop tracking of registers that are no longer used. |
412 | for (auto I : TrackedRegs) |
413 | if (!I.second) |
414 | dropRegDescribedVar(RegVars, RegNo: I.first, Var); |
415 | |
416 | // Drop all entries that have ended, and mark the new entry as live. |
417 | for (auto Index : IndicesToErase) |
418 | LiveEntries[Var].erase(V: Index); |
419 | LiveEntries[Var].insert(V: NewIndex); |
420 | } |
421 | } |
422 | |
423 | // Terminate the location range for variables described by register at |
424 | // @I by inserting @ClobberingInstr to their history. |
425 | static void clobberRegisterUses(RegDescribedVarsMap &RegVars, |
426 | RegDescribedVarsMap::iterator I, |
427 | DbgValueHistoryMap &HistMap, |
428 | DbgValueEntriesMap &LiveEntries, |
429 | const MachineInstr &ClobberingInstr) { |
430 | // Iterate over all variables described by this register and add this |
431 | // instruction to their history, clobbering it. All registers that also |
432 | // describe the clobbered variables (i.e. in variadic debug values) will have |
433 | // those Variables removed from their DescribedVars. |
434 | for (const auto &Var : I->second) { |
435 | SmallVector<Register, 4> FellowRegisters; |
436 | clobberRegEntries(Var, RegNo: I->first, ClobberingInstr, LiveEntries, HistMap, |
437 | FellowRegisters); |
438 | for (Register RegNo : FellowRegisters) |
439 | dropRegDescribedVar(RegVars, RegNo, Var); |
440 | } |
441 | RegVars.erase(position: I); |
442 | } |
443 | |
444 | // Terminate the location range for variables described by register |
445 | // @RegNo by inserting @ClobberingInstr to their history. |
446 | static void clobberRegisterUses(RegDescribedVarsMap &RegVars, unsigned RegNo, |
447 | DbgValueHistoryMap &HistMap, |
448 | DbgValueEntriesMap &LiveEntries, |
449 | const MachineInstr &ClobberingInstr) { |
450 | const auto &I = RegVars.find(x: RegNo); |
451 | if (I == RegVars.end()) |
452 | return; |
453 | clobberRegisterUses(RegVars, I, HistMap, LiveEntries, ClobberingInstr); |
454 | } |
455 | |
456 | void llvm::calculateDbgEntityHistory(const MachineFunction *MF, |
457 | const TargetRegisterInfo *TRI, |
458 | DbgValueHistoryMap &DbgValues, |
459 | DbgLabelInstrMap &DbgLabels) { |
460 | const TargetLowering *TLI = MF->getSubtarget().getTargetLowering(); |
461 | Register SP = TLI->getStackPointerRegisterToSaveRestore(); |
462 | Register FrameReg = TRI->getFrameRegister(MF: *MF); |
463 | RegDescribedVarsMap RegVars; |
464 | DbgValueEntriesMap LiveEntries; |
465 | for (const auto &MBB : *MF) { |
466 | for (const auto &MI : MBB) { |
467 | if (MI.isDebugValue()) { |
468 | assert(MI.getNumOperands() > 1 && "Invalid DBG_VALUE instruction!" ); |
469 | // Use the base variable (without any DW_OP_piece expressions) |
470 | // as index into History. The full variables including the |
471 | // piece expressions are attached to the MI. |
472 | const DILocalVariable *RawVar = MI.getDebugVariable(); |
473 | assert(RawVar->isValidLocationForIntrinsic(MI.getDebugLoc()) && |
474 | "Expected inlined-at fields to agree" ); |
475 | InlinedEntity Var(RawVar, MI.getDebugLoc()->getInlinedAt()); |
476 | |
477 | handleNewDebugValue(Var, DV: MI, RegVars, LiveEntries, HistMap&: DbgValues); |
478 | } else if (MI.isDebugLabel()) { |
479 | assert(MI.getNumOperands() == 1 && "Invalid DBG_LABEL instruction!" ); |
480 | const DILabel *RawLabel = MI.getDebugLabel(); |
481 | assert(RawLabel->isValidLocationForIntrinsic(MI.getDebugLoc()) && |
482 | "Expected inlined-at fields to agree" ); |
483 | // When collecting debug information for labels, there is no MCSymbol |
484 | // generated for it. So, we keep MachineInstr in DbgLabels in order |
485 | // to query MCSymbol afterward. |
486 | InlinedEntity L(RawLabel, MI.getDebugLoc()->getInlinedAt()); |
487 | DbgLabels.addInstr(Label: L, MI); |
488 | } |
489 | |
490 | // Meta Instructions have no output and do not change any values and so |
491 | // can be safely ignored. |
492 | if (MI.isMetaInstruction()) |
493 | continue; |
494 | |
495 | // Not a DBG_VALUE instruction. It may clobber registers which describe |
496 | // some variables. |
497 | for (const MachineOperand &MO : MI.operands()) { |
498 | if (MO.isReg() && MO.isDef() && MO.getReg()) { |
499 | // Ignore call instructions that claim to clobber SP. The AArch64 |
500 | // backend does this for aggregate function arguments. |
501 | if (MI.isCall() && MO.getReg() == SP) |
502 | continue; |
503 | // If this is a virtual register, only clobber it since it doesn't |
504 | // have aliases. |
505 | if (MO.getReg().isVirtual()) |
506 | clobberRegisterUses(RegVars, RegNo: MO.getReg(), HistMap&: DbgValues, LiveEntries, |
507 | ClobberingInstr: MI); |
508 | // If this is a register def operand, it may end a debug value |
509 | // range. Ignore frame-register defs in the epilogue and prologue, |
510 | // we expect debuggers to understand that stack-locations are |
511 | // invalid outside of the function body. |
512 | else if (MO.getReg() != FrameReg || |
513 | (!MI.getFlag(Flag: MachineInstr::FrameDestroy) && |
514 | !MI.getFlag(Flag: MachineInstr::FrameSetup))) { |
515 | for (MCRegAliasIterator AI(MO.getReg(), TRI, true); AI.isValid(); |
516 | ++AI) |
517 | clobberRegisterUses(RegVars, RegNo: *AI, HistMap&: DbgValues, LiveEntries, ClobberingInstr: MI); |
518 | } |
519 | } else if (MO.isRegMask()) { |
520 | // If this is a register mask operand, clobber all debug values in |
521 | // non-CSRs. |
522 | SmallVector<unsigned, 32> RegsToClobber; |
523 | // Don't consider SP to be clobbered by register masks. |
524 | for (auto It : RegVars) { |
525 | unsigned int Reg = It.first; |
526 | if (Reg != SP && Register::isPhysicalRegister(Reg) && |
527 | MO.clobbersPhysReg(PhysReg: Reg)) |
528 | RegsToClobber.push_back(Elt: Reg); |
529 | } |
530 | |
531 | for (unsigned Reg : RegsToClobber) { |
532 | clobberRegisterUses(RegVars, RegNo: Reg, HistMap&: DbgValues, LiveEntries, ClobberingInstr: MI); |
533 | } |
534 | } |
535 | } // End MO loop. |
536 | } // End instr loop. |
537 | |
538 | // Make sure locations for all variables are valid only until the end of |
539 | // the basic block (unless it's the last basic block, in which case let |
540 | // their liveness run off to the end of the function). |
541 | if (!MBB.empty() && &MBB != &MF->back()) { |
542 | // Iterate over all variables that have open debug values. |
543 | for (auto &Pair : LiveEntries) { |
544 | if (Pair.second.empty()) |
545 | continue; |
546 | |
547 | // Create a clobbering entry. |
548 | EntryIndex ClobIdx = DbgValues.startClobber(Var: Pair.first, MI: MBB.back()); |
549 | |
550 | // End all entries. |
551 | for (EntryIndex Idx : Pair.second) { |
552 | DbgValueHistoryMap::Entry &Ent = DbgValues.getEntry(Var: Pair.first, Index: Idx); |
553 | assert(Ent.isDbgValue() && !Ent.isClosed()); |
554 | Ent.endEntry(Index: ClobIdx); |
555 | } |
556 | } |
557 | |
558 | LiveEntries.clear(); |
559 | RegVars.clear(); |
560 | } |
561 | } |
562 | } |
563 | |
564 | #if !defined(NDEBUG) || defined(LLVM_ENABLE_DUMP) |
565 | LLVM_DUMP_METHOD void DbgValueHistoryMap::dump(StringRef FuncName) const { |
566 | dbgs() << "DbgValueHistoryMap('" << FuncName << "'):\n" ; |
567 | for (const auto &VarRangePair : *this) { |
568 | const InlinedEntity &Var = VarRangePair.first; |
569 | const Entries &Entries = VarRangePair.second; |
570 | |
571 | const DILocalVariable *LocalVar = cast<DILocalVariable>(Var.first); |
572 | const DILocation *Location = Var.second; |
573 | |
574 | dbgs() << " - " << LocalVar->getName() << " at " ; |
575 | |
576 | if (Location) |
577 | dbgs() << Location->getFilename() << ":" << Location->getLine() << ":" |
578 | << Location->getColumn(); |
579 | else |
580 | dbgs() << "<unknown location>" ; |
581 | |
582 | dbgs() << " --\n" ; |
583 | |
584 | for (const auto &E : enumerate(Entries)) { |
585 | const auto &Entry = E.value(); |
586 | dbgs() << " Entry[" << E.index() << "]: " ; |
587 | if (Entry.isDbgValue()) |
588 | dbgs() << "Debug value\n" ; |
589 | else |
590 | dbgs() << "Clobber\n" ; |
591 | dbgs() << " Instr: " << *Entry.getInstr(); |
592 | if (Entry.isDbgValue()) { |
593 | if (Entry.getEndIndex() == NoEntry) |
594 | dbgs() << " - Valid until end of function\n" ; |
595 | else |
596 | dbgs() << " - Closed by Entry[" << Entry.getEndIndex() << "]\n" ; |
597 | } |
598 | dbgs() << "\n" ; |
599 | } |
600 | } |
601 | } |
602 | #endif |
603 | |