1 | //===- FuzzerFlags.def - Run-time flags -------------------------*- C++ -* ===// |
2 | // |
3 | // Part of the LLVM Project, under the Apache License v2.0 with LLVM Exceptions. |
4 | // See https://llvm.org/LICENSE.txt for license information. |
5 | // SPDX-License-Identifier: Apache-2.0 WITH LLVM-exception |
6 | // |
7 | //===----------------------------------------------------------------------===// |
8 | // Flags. FUZZER_FLAG_INT/FUZZER_FLAG_STRING macros should be defined at the |
9 | // point of inclusion. We are not using any flag parsing library for better |
10 | // portability and independence. |
11 | //===----------------------------------------------------------------------===// |
12 | FUZZER_FLAG_INT(verbosity, 1, "Verbosity level." ) |
13 | FUZZER_FLAG_UNSIGNED(seed, 0, "Random seed. If 0, seed is generated." ) |
14 | FUZZER_FLAG_INT(runs, -1, |
15 | "Number of individual test runs (-1 for infinite runs)." ) |
16 | FUZZER_FLAG_INT(max_len, 0, "Maximum length of the test input. " |
17 | "If 0, libFuzzer tries to guess a good value based on the corpus " |
18 | "and reports it. " ) |
19 | FUZZER_FLAG_INT(len_control, 100, "Try generating small inputs first, " |
20 | "then try larger inputs over time. Specifies the rate at which the length " |
21 | "limit is increased (smaller == faster). If 0, immediately try inputs with " |
22 | "size up to max_len. Default value is 0, if LLVMFuzzerCustomMutator is used." ) |
23 | FUZZER_FLAG_STRING(seed_inputs, "A comma-separated list of input files " |
24 | "to use as an additional seed corpus. Alternatively, an \"@\" followed by " |
25 | "the name of a file containing the comma-separated list." ) |
26 | FUZZER_FLAG_INT(keep_seed, 0, "If 1, keep seed inputs in the corpus even if " |
27 | "they do not produce new coverage. When used with |reduce_inputs==1|, the " |
28 | "seed inputs will never be reduced. This option can be useful when seeds are" |
29 | "not properly formed for the fuzz target but still have useful snippets." ) |
30 | FUZZER_FLAG_INT(cross_over, 1, "If 1, cross over inputs." ) |
31 | FUZZER_FLAG_INT(cross_over_uniform_dist, 0, "Experimental. If 1, use a " |
32 | "uniform probability distribution when choosing inputs to cross over with. " |
33 | "Some of the inputs in the corpus may never get chosen for mutation " |
34 | "depending on the input mutation scheduling policy. With this flag, all " |
35 | "inputs, regardless of the input mutation scheduling policy, can be chosen " |
36 | "as an input to cross over with. This can be particularly useful with " |
37 | "|keep_seed==1|; all the initial seed inputs, even though they do not " |
38 | "increase coverage because they are not properly formed, will still be " |
39 | "chosen as an input to cross over with." ) |
40 | |
41 | FUZZER_FLAG_INT(mutate_depth, 5, |
42 | "Apply this number of consecutive mutations to each input." ) |
43 | FUZZER_FLAG_INT(reduce_depth, 0, "Experimental/internal. " |
44 | "Reduce depth if mutations lose unique features" ) |
45 | FUZZER_FLAG_INT(shuffle, 1, "Shuffle inputs at startup" ) |
46 | FUZZER_FLAG_INT(prefer_small, 1, |
47 | "If 1, always prefer smaller inputs during the corpus shuffle." ) |
48 | FUZZER_FLAG_INT( |
49 | timeout, 1200, |
50 | "Timeout in seconds (if positive). " |
51 | "If one unit runs more than this number of seconds the process will abort." ) |
52 | FUZZER_FLAG_INT(error_exitcode, 77, "When libFuzzer itself reports a bug " |
53 | "this exit code will be used." ) |
54 | FUZZER_FLAG_INT(timeout_exitcode, 70, "When libFuzzer reports a timeout " |
55 | "this exit code will be used." ) |
56 | FUZZER_FLAG_INT(max_total_time, 0, "If positive, indicates the maximal total " |
57 | "time in seconds to run the fuzzer." ) |
58 | FUZZER_FLAG_INT(help, 0, "Print help." ) |
59 | FUZZER_FLAG_INT(fork, 0, "Experimental mode where fuzzing happens " |
60 | "in a subprocess" ) |
61 | FUZZER_FLAG_INT(fork_corpus_groups, 0, "For fork mode, enable the corpus-group " |
62 | "strategy, The main corpus will be grouped according to size, " |
63 | "and each sub-process will randomly select seeds from different " |
64 | "groups as the sub-corpus." ) |
65 | FUZZER_FLAG_INT(ignore_timeouts, 1, "Ignore timeouts in fork mode" ) |
66 | FUZZER_FLAG_INT(ignore_ooms, 1, "Ignore OOMs in fork mode" ) |
67 | FUZZER_FLAG_INT(ignore_crashes, 0, "Ignore crashes in fork mode" ) |
68 | FUZZER_FLAG_INT(merge, 0, "If 1, the 2-nd, 3-rd, etc corpora will be " |
69 | "merged into the 1-st corpus. Only interesting units will be taken. " |
70 | "This flag can be used to minimize a corpus." ) |
71 | FUZZER_FLAG_INT(set_cover_merge, 0, "If 1, the 2-nd, 3-rd, etc corpora will be " |
72 | "merged into the 1-st corpus. Same as the 'merge' flag, but uses the " |
73 | "standard greedy algorithm for the set cover problem to " |
74 | "compute an approximation of the minimum set of testcases that " |
75 | "provide the same coverage as the initial corpora" ) |
76 | FUZZER_FLAG_STRING(stop_file, "Stop fuzzing ASAP if this file exists" ) |
77 | FUZZER_FLAG_STRING(merge_inner, "internal flag" ) |
78 | FUZZER_FLAG_STRING(merge_control_file, |
79 | "Specify a control file used for the merge process. " |
80 | "If a merge process gets killed it tries to leave this file " |
81 | "in a state suitable for resuming the merge. " |
82 | "By default a temporary file will be used." |
83 | "The same file can be used for multistep merge process." ) |
84 | FUZZER_FLAG_INT(minimize_crash, 0, "If 1, minimizes the provided" |
85 | " crash input. Use with -runs=N or -max_total_time=N to limit " |
86 | "the number attempts." |
87 | " Use with -exact_artifact_path to specify the output." |
88 | " Combine with ASAN_OPTIONS=dedup_token_length=3 (or similar) to ensure that" |
89 | " the minimized input triggers the same crash." |
90 | ) |
91 | FUZZER_FLAG_INT(cleanse_crash, 0, "If 1, tries to cleanse the provided" |
92 | " crash input to make it contain fewer original bytes." |
93 | " Use with -exact_artifact_path to specify the output." |
94 | ) |
95 | FUZZER_FLAG_INT(minimize_crash_internal_step, 0, "internal flag" ) |
96 | FUZZER_FLAG_STRING(features_dir, "internal flag. Used to dump feature sets on disk." |
97 | "Every time a new input is added to the corpus, a corresponding file in the features_dir" |
98 | " is created containing the unique features of that input." |
99 | " Features are stored in binary format." ) |
100 | FUZZER_FLAG_STRING(mutation_graph_file, "Saves a graph (in DOT format) to" |
101 | " mutation_graph_file. The graph contains a vertex for each input that has" |
102 | " unique coverage; directed edges are provided between parents and children" |
103 | " where the child has unique coverage, and are recorded with the type of" |
104 | " mutation that caused the child." ) |
105 | FUZZER_FLAG_INT(use_counters, 1, "Use coverage counters" ) |
106 | FUZZER_FLAG_INT(use_memmem, 1, |
107 | "Use hints from intercepting memmem, strstr, etc" ) |
108 | FUZZER_FLAG_INT(use_value_profile, 0, |
109 | "Experimental. Use value profile to guide fuzzing." ) |
110 | FUZZER_FLAG_INT(use_cmp, 1, "Use CMP traces to guide mutations" ) |
111 | FUZZER_FLAG_INT(shrink, 0, "Experimental. Try to shrink corpus inputs." ) |
112 | FUZZER_FLAG_INT(reduce_inputs, 1, |
113 | "Try to reduce the size of inputs while preserving their full feature sets" ) |
114 | FUZZER_FLAG_UNSIGNED(jobs, 0, "Number of jobs to run. If jobs >= 1 we spawn" |
115 | " this number of jobs in separate worker processes" |
116 | " with stdout/stderr redirected to fuzz-JOB.log." ) |
117 | FUZZER_FLAG_UNSIGNED(workers, 0, |
118 | "Number of simultaneous worker processes to run the jobs." |
119 | " If zero, \"min(jobs,NumberOfCpuCores()/2)\" is used." ) |
120 | FUZZER_FLAG_INT(reload, 1, |
121 | "Reload the main corpus every <N> seconds to get new units" |
122 | " discovered by other processes. If 0, disabled" ) |
123 | FUZZER_FLAG_INT(report_slow_units, 10, |
124 | "Report slowest units if they run for more than this number of seconds." ) |
125 | FUZZER_FLAG_INT(only_ascii, 0, |
126 | "If 1, generate only ASCII (isprint+isspace) inputs." ) |
127 | FUZZER_FLAG_STRING(dict, "Experimental. Use the dictionary file." ) |
128 | FUZZER_FLAG_STRING(artifact_prefix, "Write fuzzing artifacts (crash, " |
129 | "timeout, or slow inputs) as " |
130 | "$(artifact_prefix)file" ) |
131 | FUZZER_FLAG_STRING(exact_artifact_path, |
132 | "Write the single artifact on failure (crash, timeout) " |
133 | "as $(exact_artifact_path). This overrides -artifact_prefix " |
134 | "and will not use checksum in the file name. Do not " |
135 | "use the same path for several parallel processes." ) |
136 | FUZZER_FLAG_INT(print_pcs, 0, "If 1, print out newly covered PCs." ) |
137 | FUZZER_FLAG_INT(print_funcs, 2, "If >=1, print out at most this number of " |
138 | "newly covered functions." ) |
139 | FUZZER_FLAG_INT(print_final_stats, 0, "If 1, print statistics at exit." ) |
140 | FUZZER_FLAG_INT(print_corpus_stats, 0, |
141 | "If 1, print statistics on corpus elements at exit." ) |
142 | FUZZER_FLAG_INT(print_coverage, 0, "If 1, print coverage information as text" |
143 | " at exit." ) |
144 | FUZZER_FLAG_INT(print_full_coverage, 0, "If 1, print full coverage information " |
145 | "(all branches) as text at exit." ) |
146 | FUZZER_FLAG_INT(dump_coverage, 0, "Deprecated." ) |
147 | FUZZER_FLAG_INT(handle_segv, 1, "If 1, try to intercept SIGSEGV." ) |
148 | FUZZER_FLAG_INT(handle_bus, 1, "If 1, try to intercept SIGBUS." ) |
149 | FUZZER_FLAG_INT(handle_abrt, 1, "If 1, try to intercept SIGABRT." ) |
150 | FUZZER_FLAG_INT(handle_ill, 1, "If 1, try to intercept SIGILL." ) |
151 | FUZZER_FLAG_INT(handle_fpe, 1, "If 1, try to intercept SIGFPE." ) |
152 | FUZZER_FLAG_INT(handle_int, 1, "If 1, try to intercept SIGINT." ) |
153 | FUZZER_FLAG_INT(handle_term, 1, "If 1, try to intercept SIGTERM." ) |
154 | FUZZER_FLAG_INT(handle_xfsz, 1, "If 1, try to intercept SIGXFSZ." ) |
155 | FUZZER_FLAG_INT(handle_usr1, 1, "If 1, try to intercept SIGUSR1." ) |
156 | FUZZER_FLAG_INT(handle_usr2, 1, "If 1, try to intercept SIGUSR2." ) |
157 | FUZZER_FLAG_INT(handle_winexcept, 1, "If 1, try to intercept uncaught Windows " |
158 | "Visual C++ Exceptions." ) |
159 | FUZZER_FLAG_INT(close_fd_mask, 0, "If 1, close stdout at startup; " |
160 | "if 2, close stderr; if 3, close both. " |
161 | "Be careful, this will also close e.g. stderr of asan." ) |
162 | FUZZER_FLAG_INT(detect_leaks, 1, "If 1, and if LeakSanitizer is enabled " |
163 | "try to detect memory leaks during fuzzing (i.e. not only at shut down)." ) |
164 | FUZZER_FLAG_INT(purge_allocator_interval, 1, "Purge allocator caches and " |
165 | "quarantines every <N> seconds. When rss_limit_mb is specified (>0), " |
166 | "purging starts when RSS exceeds 50% of rss_limit_mb. Pass " |
167 | "purge_allocator_interval=-1 to disable this functionality." ) |
168 | FUZZER_FLAG_INT(trace_malloc, 0, "If >= 1 will print all mallocs/frees. " |
169 | "If >= 2 will also print stack traces." ) |
170 | FUZZER_FLAG_INT(rss_limit_mb, 2048, "If non-zero, the fuzzer will exit upon " |
171 | "reaching this limit of RSS memory usage." ) |
172 | FUZZER_FLAG_INT(malloc_limit_mb, 0, "If non-zero, the fuzzer will exit " |
173 | "if the target tries to allocate this number of Mb with one malloc call. " |
174 | "If zero (default) same limit as rss_limit_mb is applied." ) |
175 | FUZZER_FLAG_STRING(exit_on_src_pos, "Exit if a newly found PC originates" |
176 | " from the given source location. Example: -exit_on_src_pos=foo.cc:123. " |
177 | "Used primarily for testing libFuzzer itself." ) |
178 | FUZZER_FLAG_STRING(exit_on_item, "Exit if an item with a given sha1 sum" |
179 | " was added to the corpus. " |
180 | "Used primarily for testing libFuzzer itself." ) |
181 | FUZZER_FLAG_INT(ignore_remaining_args, 0, "If 1, ignore all arguments passed " |
182 | "after this one. Useful for fuzzers that need to do their own " |
183 | "argument parsing." ) |
184 | FUZZER_FLAG_STRING(focus_function, "Experimental. " |
185 | "Fuzzing will focus on inputs that trigger calls to this function. " |
186 | "If -focus_function=auto and -data_flow_trace is used, libFuzzer " |
187 | "will choose the focus functions automatically. Disables -entropic when " |
188 | "specified." ) |
189 | FUZZER_FLAG_INT(entropic, 1, "Enables entropic power schedule." ) |
190 | FUZZER_FLAG_INT(entropic_feature_frequency_threshold, 0xFF, "Experimental. If " |
191 | "entropic is enabled, all features which are observed less often than " |
192 | "the specified value are considered as rare." ) |
193 | FUZZER_FLAG_INT(entropic_number_of_rarest_features, 100, "Experimental. If " |
194 | "entropic is enabled, we keep track of the frequencies only for the " |
195 | "Top-X least abundant features (union features that are considered as " |
196 | "rare)." ) |
197 | FUZZER_FLAG_INT(entropic_scale_per_exec_time, 0, "Experimental. If 1, " |
198 | "the Entropic power schedule gets scaled based on the input execution " |
199 | "time. Inputs with lower execution time get scheduled more (up to 30x). " |
200 | "Note that, if 1, fuzzer stops from being deterministic even if a " |
201 | "non-zero random seed is given." ) |
202 | |
203 | FUZZER_FLAG_INT(analyze_dict, 0, "Experimental" ) |
204 | FUZZER_DEPRECATED_FLAG(use_clang_coverage) |
205 | FUZZER_FLAG_STRING(data_flow_trace, "Experimental: use the data flow trace" ) |
206 | FUZZER_FLAG_STRING(collect_data_flow, |
207 | "Experimental: collect the data flow trace" ) |
208 | |
209 | FUZZER_FLAG_INT(create_missing_dirs, 0, "Automatically attempt to create " |
210 | "directories for arguments that would normally expect them to already " |
211 | "exist (i.e. artifact_prefix, exact_artifact_path, features_dir, corpus)" ) |
212 | |