| 1 | //===- ACCImplicitDeclare.cpp ---------------------------------------------===// |
| 2 | // |
| 3 | // Part of the LLVM Project, under the Apache License v2.0 with LLVM Exceptions. |
| 4 | // See https://llvm.org/LICENSE.txt for license information. |
| 5 | // SPDX-License-Identifier: Apache-2.0 WITH LLVM-exception |
| 6 | // |
| 7 | //===----------------------------------------------------------------------===// |
| 8 | // |
| 9 | // This pass applies implicit `acc declare` actions to global variables |
| 10 | // referenced in OpenACC compute regions and routine functions. |
| 11 | // |
| 12 | // Overview: |
| 13 | // --------- |
| 14 | // Global references in an acc regions (for globals not marked with `acc |
| 15 | // declare` by the user) can be handled in one of two ways: |
| 16 | // - Mapped through data clauses |
| 17 | // - Implicitly marked as `acc declare` (this pass) |
| 18 | // |
| 19 | // Thus, the OpenACC specification focuses solely on implicit data mapping rules |
| 20 | // whose implementation is captured in `ACCImplicitData` pass. |
| 21 | // |
| 22 | // However, it is both advantageous and required for certain cases to |
| 23 | // use implicit `acc declare` instead: |
| 24 | // - Any functions that are implicitly marked as `acc routine` through |
| 25 | // `ACCImplicitRoutine` may reference globals. Since data mapping |
| 26 | // is only possible for compute regions, such globals can only be |
| 27 | // made available on device through `acc declare`. |
| 28 | // - Compiler can generate and use globals for cases needed in IR |
| 29 | // representation such as type descriptors or various names needed for |
| 30 | // runtime calls and error reporting - such cases often are introduced |
| 31 | // after a frontend semantic checking is done since it is related to |
| 32 | // implementation detail. Thus, such compiler generated globals would |
| 33 | // not have been visible for a user to mark with `acc declare`. |
| 34 | // - Constant globals such as filename strings or data initialization values |
| 35 | // are values that do not get mutated but are still needed for appropriate |
| 36 | // runtime execution. If a kernel is launched 1000 times, it is not a |
| 37 | // good idea to map such a global 1000 times. Therefore, such globals |
| 38 | // benefit from being marked with `acc declare`. |
| 39 | // |
| 40 | // This pass automatically |
| 41 | // marks global variables with the `acc.declare` attribute when they are |
| 42 | // referenced in OpenACC compute constructs or routine functions and meet |
| 43 | // the criteria noted above, ensuring |
| 44 | // they are properly handled for device execution. |
| 45 | // |
| 46 | // The pass performs two main optimizations: |
| 47 | // |
| 48 | // 1. Hoisting: For non-constant globals and constant globals without a local |
| 49 | // initializer referenced in compute regions, the pass hoists the address-of |
| 50 | // operation out of the region when possible, allowing them to be implicitly |
| 51 | // mapped through normal data clause mechanisms rather than requiring |
| 52 | // declare marking. |
| 53 | // |
| 54 | // 2. Declaration: For globals that must be available on the device (constants, |
| 55 | // globals in routines, globals in recipe operations), the pass adds the |
| 56 | // `acc.declare` attribute with the copyin data clause. |
| 57 | // |
| 58 | // Requirements: |
| 59 | // ------------- |
| 60 | // To use this pass in a pipeline, the following requirements must be met: |
| 61 | // |
| 62 | // 1. Operation Interface Implementation: Operations that compute addresses |
| 63 | // of global variables must implement the `acc::AddressOfGlobalOpInterface` |
| 64 | // and those that represent globals must implement the |
| 65 | // `acc::GlobalOpInterface`. Additionally, any operations that indirectly |
| 66 | // access globals must implement the `acc::IndirectGlobalAccessOpInterface`. |
| 67 | // |
| 68 | // 2. Analysis Registration (Optional): If custom behavior is needed for |
| 69 | // determining if a symbol use is valid within GPU regions, the dialect |
| 70 | // should pre-register the `acc::OpenACCSupport` analysis. |
| 71 | // |
| 72 | // Examples: |
| 73 | // --------- |
| 74 | // |
| 75 | // Example 1: Non-constant global in compute region (hoisted) |
| 76 | // |
| 77 | // Before: |
| 78 | // memref.global @g_scalar : memref<f32> = dense<0.0> |
| 79 | // func.func @test() { |
| 80 | // acc.serial { |
| 81 | // %addr = memref.get_global @g_scalar : memref<f32> |
| 82 | // %val = memref.load %addr[] : memref<f32> |
| 83 | // acc.yield |
| 84 | // } |
| 85 | // } |
| 86 | // |
| 87 | // After: |
| 88 | // memref.global @g_scalar : memref<f32> = dense<0.0> |
| 89 | // func.func @test() { |
| 90 | // %addr = memref.get_global @g_scalar : memref<f32> |
| 91 | // acc.serial { |
| 92 | // %val = memref.load %addr[] : memref<f32> |
| 93 | // acc.yield |
| 94 | // } |
| 95 | // } |
| 96 | // |
| 97 | // Example 2: Constant global in compute region (declared) |
| 98 | // |
| 99 | // Before: |
| 100 | // memref.global constant @g_const : memref<f32> = dense<1.0> |
| 101 | // func.func @test() { |
| 102 | // acc.serial { |
| 103 | // %addr = memref.get_global @g_const : memref<f32> |
| 104 | // %val = memref.load %addr[] : memref<f32> |
| 105 | // acc.yield |
| 106 | // } |
| 107 | // } |
| 108 | // |
| 109 | // After: |
| 110 | // memref.global constant @g_const : memref<f32> = dense<1.0> |
| 111 | // {acc.declare = #acc.declare<dataClause = acc_copyin>} |
| 112 | // func.func @test() { |
| 113 | // acc.serial { |
| 114 | // %addr = memref.get_global @g_const : memref<f32> |
| 115 | // %val = memref.load %addr[] : memref<f32> |
| 116 | // acc.yield |
| 117 | // } |
| 118 | // } |
| 119 | // |
| 120 | // Example 3: Global in acc routine (declared) |
| 121 | // |
| 122 | // Before: |
| 123 | // memref.global @g_data : memref<f32> = dense<0.0> |
| 124 | // acc.routine @routine_0 func(@device_func) |
| 125 | // func.func @device_func() attributes {acc.routine_info = ...} { |
| 126 | // %addr = memref.get_global @g_data : memref<f32> |
| 127 | // %val = memref.load %addr[] : memref<f32> |
| 128 | // } |
| 129 | // |
| 130 | // After: |
| 131 | // memref.global @g_data : memref<f32> = dense<0.0> |
| 132 | // {acc.declare = #acc.declare<dataClause = acc_copyin>} |
| 133 | // acc.routine @routine_0 func(@device_func) |
| 134 | // func.func @device_func() attributes {acc.routine_info = ...} { |
| 135 | // %addr = memref.get_global @g_data : memref<f32> |
| 136 | // %val = memref.load %addr[] : memref<f32> |
| 137 | // } |
| 138 | // |
| 139 | // Example 4: Global in private recipe (declared if recipe is used) |
| 140 | // |
| 141 | // Before: |
| 142 | // memref.global @g_init : memref<f32> = dense<0.0> |
| 143 | // acc.private.recipe @priv_recipe : memref<f32> init { |
| 144 | // ^bb0(%arg0: memref<f32>): |
| 145 | // %alloc = memref.alloc() : memref<f32> |
| 146 | // %global = memref.get_global @g_init : memref<f32> |
| 147 | // %val = memref.load %global[] : memref<f32> |
| 148 | // memref.store %val, %alloc[] : memref<f32> |
| 149 | // acc.yield %alloc : memref<f32> |
| 150 | // } destroy { ... } |
| 151 | // func.func @test() { |
| 152 | // %var = memref.alloc() : memref<f32> |
| 153 | // %priv = acc.private varPtr(%var : memref<f32>) |
| 154 | // recipe(@priv_recipe) -> memref<f32> |
| 155 | // acc.parallel private(%priv : memref<f32>) { ... } |
| 156 | // } |
| 157 | // |
| 158 | // After: |
| 159 | // memref.global @g_init : memref<f32> = dense<0.0> |
| 160 | // {acc.declare = #acc.declare<dataClause = acc_copyin>} |
| 161 | // acc.private.recipe @priv_recipe : memref<f32> init { |
| 162 | // ^bb0(%arg0: memref<f32>): |
| 163 | // %alloc = memref.alloc() : memref<f32> |
| 164 | // %global = memref.get_global @g_init : memref<f32> |
| 165 | // %val = memref.load %global[] : memref<f32> |
| 166 | // memref.store %val, %alloc[] : memref<f32> |
| 167 | // acc.yield %alloc : memref<f32> |
| 168 | // } destroy { ... } |
| 169 | // func.func @test() { |
| 170 | // %var = memref.alloc() : memref<f32> |
| 171 | // %priv = acc.private varPtr(%var : memref<f32>) |
| 172 | // recipe(@priv_recipe) -> memref<f32> |
| 173 | // acc.parallel private(%priv : memref<f32>) { ... } |
| 174 | // } |
| 175 | // |
| 176 | //===----------------------------------------------------------------------===// |
| 177 | |
| 178 | #include "mlir/Dialect/OpenACC/Extensions/AllExtensions.h" |
| 179 | #include "mlir/Dialect/OpenACC/Transforms/Passes.h" |
| 180 | |
| 181 | #include "mlir/Dialect/OpenACC/Analysis/OpenACCSupport.h" |
| 182 | #include "mlir/Dialect/OpenACC/OpenACC.h" |
| 183 | #include "mlir/IR/Builders.h" |
| 184 | #include "mlir/IR/BuiltinAttributes.h" |
| 185 | #include "mlir/IR/BuiltinOps.h" |
| 186 | #include "mlir/IR/Operation.h" |
| 187 | #include "mlir/IR/Value.h" |
| 188 | #include "mlir/Interfaces/FunctionInterfaces.h" |
| 189 | #include "llvm/ADT/DenseSet.h" |
| 190 | #include "llvm/ADT/SmallVector.h" |
| 191 | #include "llvm/ADT/TypeSwitch.h" |
| 192 | |
| 193 | namespace mlir { |
| 194 | namespace acc { |
| 195 | #define GEN_PASS_DEF_ACCIMPLICITDECLARE |
| 196 | #include "mlir/Dialect/OpenACC/Transforms/Passes.h.inc" |
| 197 | } // namespace acc |
| 198 | } // namespace mlir |
| 199 | |
| 200 | #define DEBUG_TYPE "acc-implicit-declare" |
| 201 | |
| 202 | using namespace mlir; |
| 203 | |
| 204 | namespace { |
| 205 | using GlobalOpSetT = llvm::SmallSetVector<Operation *, 16>; |
| 206 | |
| 207 | /// Checks whether a use of the requested `globalOp` should be considered |
| 208 | /// for hoisting out of acc region due to avoid `acc declare`ing something |
| 209 | /// that instead should be implicitly mapped. |
| 210 | static bool isGlobalUseCandidateForHoisting(Operation *globalOp, |
| 211 | Operation *user, |
| 212 | SymbolRefAttr symbol, |
| 213 | acc::OpenACCSupport &accSupport) { |
| 214 | // This symbol is valid in GPU region. This means semantics |
| 215 | // would change if moved to host - therefore it is not a candidate. |
| 216 | if (accSupport.isValidSymbolUse(user, symbol)) |
| 217 | return false; |
| 218 | |
| 219 | bool isInitializedConstant = false; |
| 220 | bool isFunction = false; |
| 221 | |
| 222 | if (auto globalVarOp = dyn_cast<acc::GlobalVariableOpInterface>(Val: globalOp)) |
| 223 | isInitializedConstant = |
| 224 | globalVarOp.isConstant() && globalVarOp.hasInitializer(); |
| 225 | |
| 226 | if (isa<FunctionOpInterface>(Val: globalOp)) |
| 227 | isFunction = true; |
| 228 | |
| 229 | // Initialized constants should be kept in device code so their definitions |
| 230 | // can be duplicated in the device image. An initializer-less constant is an |
| 231 | // external declaration, so keeping its address-of in device code would |
| 232 | // create a device symbol that a separately compiled defining translation |
| 233 | // unit may not provide. Hoist it so normal implicit mapping passes its host |
| 234 | // definition to the compute region instead. |
| 235 | // |
| 236 | // Function references should be kept in device code to ensure their device |
| 237 | // addresses are computed. Everything else should be hoisted since we already |
| 238 | // proved it is not a valid symbol in the GPU region. |
| 239 | return !isInitializedConstant && !isFunction; |
| 240 | } |
| 241 | |
| 242 | /// Checks whether it is valid to use acc.declare marking on the global. |
| 243 | bool isValidForAccDeclare(Operation *globalOp) { |
| 244 | // For functions - we use acc.routine marking instead. |
| 245 | return !isa<FunctionOpInterface>(Val: globalOp); |
| 246 | } |
| 247 | |
| 248 | /// Collect remaining symbol uses with a single walk. Asking whether each |
| 249 | /// recipe is referenced via getSymbolUses walks the whole module again, and |
| 250 | /// recipes are generated per type, so there can be many of them. A recipe |
| 251 | /// referring only to its own symbol is not a "relevant" use (it does not |
| 252 | /// mean the recipe is attached to a compute construct). |
| 253 | static std::optional<llvm::DenseSet<StringAttr>> |
| 254 | collectUsedSymbolsExcludingRecipeSelfUses(ModuleOp mod) { |
| 255 | // The module region, not the module op, is the symbol table scope: asking |
| 256 | // for the uses on the op itself would not walk into the body. |
| 257 | std::optional<SymbolTable::UseRange> uses = |
| 258 | SymbolTable::getSymbolUses(from: &mod.getBodyRegion()); |
| 259 | if (!uses) |
| 260 | return std::nullopt; |
| 261 | |
| 262 | llvm::DenseSet<StringAttr> usedSymbols; |
| 263 | auto isRecipeSelfUse = [](Operation *user, StringAttr name) { |
| 264 | if (auto recipe = dyn_cast<acc::PrivateRecipeOp>(Val: user)) |
| 265 | return recipe.getNameAttr() == name; |
| 266 | if (auto recipe = dyn_cast<acc::FirstprivateRecipeOp>(Val: user)) |
| 267 | return recipe.getNameAttr() == name; |
| 268 | if (auto recipe = dyn_cast<acc::ReductionRecipeOp>(Val: user)) |
| 269 | return recipe.getNameAttr() == name; |
| 270 | return false; |
| 271 | }; |
| 272 | for (const SymbolTable::SymbolUse &use : *uses) { |
| 273 | StringAttr name = use.getSymbolRef().getLeafReference(); |
| 274 | if (!isRecipeSelfUse(use.getUser(), name)) |
| 275 | usedSymbols.insert(V: name); |
| 276 | } |
| 277 | return usedSymbols; |
| 278 | } |
| 279 | |
| 280 | /// Checks whether a recipe operation has meaningful use of its symbol that |
| 281 | /// justifies processing its regions for global references. Returns false if: |
| 282 | /// 1. The recipe has no symbol uses at all, or |
| 283 | /// 2. The only symbol use is the recipe's own symbol definition |
| 284 | template <typename RecipeOpT> |
| 285 | static bool hasRelevantRecipeUse( |
| 286 | RecipeOpT &recipeOp, ModuleOp &mod, |
| 287 | const std::optional<llvm::DenseSet<StringAttr>> &usedSymbols) { |
| 288 | auto recipeName = recipeOp.getNameAttr(); |
| 289 | if (usedSymbols) |
| 290 | return usedSymbols->contains(V: recipeName); |
| 291 | |
| 292 | std::optional<SymbolTable::UseRange> symbolUses = recipeOp.getSymbolUses(mod); |
| 293 | |
| 294 | // No recipe symbol uses. |
| 295 | if (!symbolUses.has_value() || symbolUses->empty()) |
| 296 | return false; |
| 297 | |
| 298 | // If more than one use, assume it's used. |
| 299 | auto begin = symbolUses->begin(); |
| 300 | auto end = symbolUses->end(); |
| 301 | if (begin != end && std::next(x: begin) != end) |
| 302 | return true; |
| 303 | |
| 304 | // If single use, check if the use is the recipe itself. |
| 305 | const SymbolTable::SymbolUse &use = *symbolUses->begin(); |
| 306 | return use.getUser() != recipeOp.getOperation(); |
| 307 | } |
| 308 | |
| 309 | // Hoists addr_of operations for globals that cannot be defined in this |
| 310 | // translation unit out of OpenACC regions. This way they are implicitly mapped |
| 311 | // instead of being considered for implicit declare. |
| 312 | template <typename AccConstructT> |
| 313 | static void hoistNonConstantDirectUses(AccConstructT accOp, |
| 314 | acc::OpenACCSupport &accSupport) { |
| 315 | accOp.walk([&](acc::AddressOfGlobalOpInterface addrOfOp) { |
| 316 | SymbolRefAttr symRef = addrOfOp.getSymbol(); |
| 317 | if (symRef) { |
| 318 | Operation *globalOp = |
| 319 | SymbolTable::lookupNearestSymbolFrom(from: addrOfOp, symbol: symRef); |
| 320 | if (isGlobalUseCandidateForHoisting(globalOp, user: addrOfOp, symbol: symRef, |
| 321 | accSupport)) { |
| 322 | auto computeRegionParent = |
| 323 | addrOfOp->getParentOfType<acc::ComputeRegionOp>(); |
| 324 | addrOfOp->moveBefore(accOp); |
| 325 | if (computeRegionParent) |
| 326 | for (Value v : addrOfOp->getResults()) |
| 327 | computeRegionParent.wireHoistedValueThroughIns(value: v); |
| 328 | LLVM_DEBUG( |
| 329 | llvm::dbgs() << "Hoisted:\n\t" << addrOfOp << "\n\tfrom:\n\t" ; |
| 330 | accOp->print(llvm::dbgs(), |
| 331 | OpPrintingFlags{}.skipRegions().enableDebugInfo()); |
| 332 | llvm::dbgs() << "\n" ); |
| 333 | } |
| 334 | } |
| 335 | }); |
| 336 | } |
| 337 | |
| 338 | // Collects the globals referenced in a device region |
| 339 | static void collectGlobalsFromDeviceRegion(Region ®ion, |
| 340 | GlobalOpSetT &globals, |
| 341 | acc::OpenACCSupport &accSupport, |
| 342 | SymbolTable &symTab) { |
| 343 | region.walk(callback: [&](Operation *op) { |
| 344 | // 1) Only consider relevant operations which use symbols |
| 345 | auto addrOfOp = dyn_cast<acc::AddressOfGlobalOpInterface>(Val: op); |
| 346 | if (addrOfOp) { |
| 347 | SymbolRefAttr symRef = addrOfOp.getSymbol(); |
| 348 | // 2) Found an operation which uses the symbol. Next determine if it |
| 349 | // is a candidate for `acc declare`. Some of the criteria considered |
| 350 | // is whether this symbol is not already a device one (either because |
| 351 | // acc declare is already used or this is a CUF global). |
| 352 | Operation *globalOp = nullptr; |
| 353 | bool isCandidate = !accSupport.isValidSymbolUse(user: op, symbol: symRef, definingOpPtr: &globalOp); |
| 354 | // 3) Add the candidate to the set of globals to be `acc declare`d. |
| 355 | if (isCandidate && globalOp && isValidForAccDeclare(globalOp)) |
| 356 | globals.insert(X: globalOp); |
| 357 | } else if (auto indirectAccessOp = |
| 358 | dyn_cast<acc::IndirectGlobalAccessOpInterface>(Val: op)) { |
| 359 | // Process operations that indirectly access globals |
| 360 | llvm::SmallVector<SymbolRefAttr> symbols; |
| 361 | indirectAccessOp.getReferencedSymbols(symbols, symbolTable: &symTab); |
| 362 | for (SymbolRefAttr symRef : symbols) |
| 363 | if (Operation *globalOp = symTab.lookup(name: symRef.getLeafReference())) |
| 364 | if (isValidForAccDeclare(globalOp)) |
| 365 | globals.insert(X: globalOp); |
| 366 | } |
| 367 | }); |
| 368 | } |
| 369 | |
| 370 | // Adds the declare attribute to the operation `op`. |
| 371 | static void addDeclareAttr(MLIRContext *context, Operation *op, |
| 372 | acc::DataClause clause) { |
| 373 | op->setDiscardableAttr( |
| 374 | name: acc::getDeclareAttrName(), |
| 375 | value: acc::DeclareAttr::get(context, |
| 376 | dataClause: acc::DataClauseAttr::get(context, value: clause))); |
| 377 | } |
| 378 | |
| 379 | // This pass applies implicit declare actions for globals referenced in |
| 380 | // OpenACC compute and routine regions. |
| 381 | class ACCImplicitDeclare |
| 382 | : public acc::impl::ACCImplicitDeclareBase<ACCImplicitDeclare> { |
| 383 | public: |
| 384 | using ACCImplicitDeclareBase<ACCImplicitDeclare>::ACCImplicitDeclareBase; |
| 385 | |
| 386 | void getDependentDialects(DialectRegistry ®istry) const override { |
| 387 | ACCImplicitDeclareBase<ACCImplicitDeclare>::getDependentDialects(registry); |
| 388 | acc::registerAllExtensions(registry); |
| 389 | } |
| 390 | |
| 391 | void runOnOperation() override { |
| 392 | ModuleOp mod = getOperation(); |
| 393 | MLIRContext *context = &getContext(); |
| 394 | acc::OpenACCSupport &accSupport = getAnalysis<acc::OpenACCSupport>(); |
| 395 | |
| 396 | // 1) Start off by hoisting any AddressOf operations out of acc region |
| 397 | // for any cases we do not want to `acc declare`. This is because we can |
| 398 | // rely on implicit data mapping in majority of cases without uselessly |
| 399 | // polluting the device globals. |
| 400 | mod.walk(callback: [&](Operation *op) { |
| 401 | TypeSwitch<Operation *, void>(op) |
| 402 | .Case<ACC_COMPUTE_CONSTRUCT_OPS, acc::ComputeRegionOp>( |
| 403 | caseFn: [&](auto accOp) { |
| 404 | hoistNonConstantDirectUses(accOp, accSupport); |
| 405 | }); |
| 406 | }); |
| 407 | |
| 408 | // 2) Collect global symbols which need to be `acc declare`d. Do it for |
| 409 | // compute regions, acc routine, and existing globals with the declare |
| 410 | // attribute. |
| 411 | SymbolTable symTab(mod); |
| 412 | GlobalOpSetT globalsToAccDeclare; |
| 413 | std::optional<llvm::DenseSet<StringAttr>> usedSymbols = |
| 414 | collectUsedSymbolsExcludingRecipeSelfUses(mod); |
| 415 | mod.walk(callback: [&](Operation *op) { |
| 416 | TypeSwitch<Operation *, void>(op) |
| 417 | .Case<ACC_COMPUTE_CONSTRUCT_OPS, acc::ComputeRegionOp>( |
| 418 | caseFn: [&](auto accOp) { |
| 419 | collectGlobalsFromDeviceRegion( |
| 420 | accOp.getRegion(), globalsToAccDeclare, accSupport, symTab); |
| 421 | }) |
| 422 | .Case(caseFn: [&](FunctionOpInterface func) { |
| 423 | if ((acc::isAccRoutine(op: func) || |
| 424 | acc::isSpecializedAccRoutine(op: func)) && |
| 425 | !func.isExternal()) |
| 426 | collectGlobalsFromDeviceRegion(region&: func.getFunctionBody(), |
| 427 | globals&: globalsToAccDeclare, accSupport, |
| 428 | symTab); |
| 429 | }) |
| 430 | .Case(caseFn: [&](acc::GlobalVariableOpInterface globalVarOp) { |
| 431 | if (globalVarOp->getDiscardableAttr(name: acc::getDeclareAttrName())) |
| 432 | if (Region *initRegion = globalVarOp.getInitRegion()) |
| 433 | collectGlobalsFromDeviceRegion(region&: *initRegion, globals&: globalsToAccDeclare, |
| 434 | accSupport, symTab); |
| 435 | }) |
| 436 | .Case(caseFn: [&](acc::PrivateRecipeOp privateRecipe) { |
| 437 | if (hasRelevantRecipeUse(recipeOp&: privateRecipe, mod, usedSymbols)) { |
| 438 | collectGlobalsFromDeviceRegion(region&: privateRecipe.getInitRegion(), |
| 439 | globals&: globalsToAccDeclare, accSupport, |
| 440 | symTab); |
| 441 | collectGlobalsFromDeviceRegion(region&: privateRecipe.getDestroyRegion(), |
| 442 | globals&: globalsToAccDeclare, accSupport, |
| 443 | symTab); |
| 444 | } |
| 445 | }) |
| 446 | .Case(caseFn: [&](acc::FirstprivateRecipeOp firstprivateRecipe) { |
| 447 | if (hasRelevantRecipeUse(recipeOp&: firstprivateRecipe, mod, usedSymbols)) { |
| 448 | collectGlobalsFromDeviceRegion(region&: firstprivateRecipe.getInitRegion(), |
| 449 | globals&: globalsToAccDeclare, accSupport, |
| 450 | symTab); |
| 451 | collectGlobalsFromDeviceRegion( |
| 452 | region&: firstprivateRecipe.getDestroyRegion(), globals&: globalsToAccDeclare, |
| 453 | accSupport, symTab); |
| 454 | collectGlobalsFromDeviceRegion(region&: firstprivateRecipe.getCopyRegion(), |
| 455 | globals&: globalsToAccDeclare, accSupport, |
| 456 | symTab); |
| 457 | } |
| 458 | }) |
| 459 | .Case(caseFn: [&](acc::ReductionRecipeOp reductionRecipe) { |
| 460 | if (hasRelevantRecipeUse(recipeOp&: reductionRecipe, mod, usedSymbols)) { |
| 461 | collectGlobalsFromDeviceRegion(region&: reductionRecipe.getInitRegion(), |
| 462 | globals&: globalsToAccDeclare, accSupport, |
| 463 | symTab); |
| 464 | collectGlobalsFromDeviceRegion( |
| 465 | region&: reductionRecipe.getCombinerRegion(), globals&: globalsToAccDeclare, |
| 466 | accSupport, symTab); |
| 467 | } |
| 468 | }); |
| 469 | }); |
| 470 | |
| 471 | // 3) Finally, generate the appropriate declare actions needed to ensure |
| 472 | // this is considered for device global. |
| 473 | for (Operation *globalOp : globalsToAccDeclare) { |
| 474 | LLVM_DEBUG( |
| 475 | llvm::dbgs() << "Global is being `acc declare copyin`d: " ; |
| 476 | globalOp->print(llvm::dbgs(), |
| 477 | OpPrintingFlags{}.skipRegions().enableDebugInfo()); |
| 478 | llvm::dbgs() << "\n" ); |
| 479 | |
| 480 | // Mark it as declare copyin. |
| 481 | addDeclareAttr(context, op: globalOp, clause: acc::DataClause::acc_copyin); |
| 482 | |
| 483 | // TODO: May need to create the global constructor which does the mapping |
| 484 | // action. It is not yet clear if this is needed yet (since the globals |
| 485 | // might just end up in the GPU image without requiring mapping via |
| 486 | // runtime). |
| 487 | } |
| 488 | } |
| 489 | }; |
| 490 | } // namespace |
| 491 | |