| 1 | //===--- CompilerInstance.cpp ---------------------------------------------===// |
| 2 | // |
| 3 | // Part of the LLVM Project, under the Apache License v2.0 with LLVM Exceptions. |
| 4 | // See https://llvm.org/LICENSE.txt for license information. |
| 5 | // SPDX-License-Identifier: Apache-2.0 WITH LLVM-exception |
| 6 | // |
| 7 | //===----------------------------------------------------------------------===// |
| 8 | |
| 9 | #include "clang/Frontend/CompilerInstance.h" |
| 10 | #include "clang/AST/ASTConsumer.h" |
| 11 | #include "clang/AST/ASTContext.h" |
| 12 | #include "clang/AST/Decl.h" |
| 13 | #include "clang/Basic/CharInfo.h" |
| 14 | #include "clang/Basic/Diagnostic.h" |
| 15 | #include "clang/Basic/DiagnosticOptions.h" |
| 16 | #include "clang/Basic/FileManager.h" |
| 17 | #include "clang/Basic/LangStandard.h" |
| 18 | #include "clang/Basic/SourceManager.h" |
| 19 | #include "clang/Basic/Stack.h" |
| 20 | #include "clang/Basic/TargetInfo.h" |
| 21 | #include "clang/Basic/Version.h" |
| 22 | #include "clang/Config/config.h" |
| 23 | #include "clang/Frontend/ChainedDiagnosticConsumer.h" |
| 24 | #include "clang/Frontend/FrontendAction.h" |
| 25 | #include "clang/Frontend/FrontendActions.h" |
| 26 | #include "clang/Frontend/FrontendDiagnostic.h" |
| 27 | #include "clang/Frontend/FrontendPluginRegistry.h" |
| 28 | #include "clang/Frontend/LogDiagnosticPrinter.h" |
| 29 | #include "clang/Frontend/SARIFDiagnosticPrinter.h" |
| 30 | #include "clang/Frontend/SerializedDiagnosticPrinter.h" |
| 31 | #include "clang/Frontend/TextDiagnosticPrinter.h" |
| 32 | #include "clang/Frontend/Utils.h" |
| 33 | #include "clang/Frontend/VerifyDiagnosticConsumer.h" |
| 34 | #include "clang/Lex/HeaderSearch.h" |
| 35 | #include "clang/Lex/Preprocessor.h" |
| 36 | #include "clang/Lex/PreprocessorOptions.h" |
| 37 | #include "clang/Sema/CodeCompleteConsumer.h" |
| 38 | #include "clang/Sema/ParsedAttr.h" |
| 39 | #include "clang/Sema/Sema.h" |
| 40 | #include "clang/Serialization/ASTReader.h" |
| 41 | #include "clang/Serialization/GlobalModuleIndex.h" |
| 42 | #include "clang/Serialization/InMemoryModuleCache.h" |
| 43 | #include "clang/Serialization/ModuleCache.h" |
| 44 | #include "llvm/ADT/IntrusiveRefCntPtr.h" |
| 45 | #include "llvm/ADT/STLExtras.h" |
| 46 | #include "llvm/ADT/ScopeExit.h" |
| 47 | #include "llvm/ADT/Statistic.h" |
| 48 | #include "llvm/Config/llvm-config.h" |
| 49 | #include "llvm/Support/AdvisoryLock.h" |
| 50 | #include "llvm/Support/BuryPointer.h" |
| 51 | #include "llvm/Support/CrashRecoveryContext.h" |
| 52 | #include "llvm/Support/Errc.h" |
| 53 | #include "llvm/Support/FileSystem.h" |
| 54 | #include "llvm/Support/MemoryBuffer.h" |
| 55 | #include "llvm/Support/Path.h" |
| 56 | #include "llvm/Support/Signals.h" |
| 57 | #include "llvm/Support/TimeProfiler.h" |
| 58 | #include "llvm/Support/Timer.h" |
| 59 | #include "llvm/Support/VirtualFileSystem.h" |
| 60 | #include "llvm/Support/raw_ostream.h" |
| 61 | #include "llvm/TargetParser/Host.h" |
| 62 | #include <optional> |
| 63 | #include <time.h> |
| 64 | #include <utility> |
| 65 | |
| 66 | using namespace clang; |
| 67 | |
| 68 | CompilerInstance::CompilerInstance( |
| 69 | std::shared_ptr<CompilerInvocation> Invocation, |
| 70 | std::shared_ptr<PCHContainerOperations> PCHContainerOps, |
| 71 | ModuleCache *ModCache) |
| 72 | : ModuleLoader(/*BuildingModule=*/ModCache), |
| 73 | Invocation(std::move(Invocation)), |
| 74 | ModCache(ModCache ? ModCache : createCrossProcessModuleCache()), |
| 75 | ThePCHContainerOperations(std::move(PCHContainerOps)) { |
| 76 | assert(this->Invocation && "Invocation must not be null" ); |
| 77 | } |
| 78 | |
| 79 | CompilerInstance::~CompilerInstance() { |
| 80 | assert(OutputFiles.empty() && "Still output files in flight?" ); |
| 81 | } |
| 82 | |
| 83 | bool CompilerInstance::shouldBuildGlobalModuleIndex() const { |
| 84 | return (BuildGlobalModuleIndex || |
| 85 | (TheASTReader && TheASTReader->isGlobalIndexUnavailable() && |
| 86 | getFrontendOpts().GenerateGlobalModuleIndex)) && |
| 87 | !DisableGeneratingGlobalModuleIndex; |
| 88 | } |
| 89 | |
| 90 | void CompilerInstance::setDiagnostics(DiagnosticsEngine *Value) { |
| 91 | Diagnostics = Value; |
| 92 | } |
| 93 | |
| 94 | void CompilerInstance::setVerboseOutputStream(raw_ostream &Value) { |
| 95 | OwnedVerboseOutputStream.reset(); |
| 96 | VerboseOutputStream = &Value; |
| 97 | } |
| 98 | |
| 99 | void CompilerInstance::setVerboseOutputStream(std::unique_ptr<raw_ostream> Value) { |
| 100 | OwnedVerboseOutputStream.swap(u&: Value); |
| 101 | VerboseOutputStream = OwnedVerboseOutputStream.get(); |
| 102 | } |
| 103 | |
| 104 | void CompilerInstance::setTarget(TargetInfo *Value) { Target = Value; } |
| 105 | void CompilerInstance::setAuxTarget(TargetInfo *Value) { AuxTarget = Value; } |
| 106 | |
| 107 | bool CompilerInstance::createTarget() { |
| 108 | // Create the target instance. |
| 109 | setTarget(TargetInfo::CreateTargetInfo(Diags&: getDiagnostics(), |
| 110 | Opts&: getInvocation().getTargetOpts())); |
| 111 | if (!hasTarget()) |
| 112 | return false; |
| 113 | |
| 114 | // Check whether AuxTarget exists, if not, then create TargetInfo for the |
| 115 | // other side of CUDA/OpenMP/SYCL compilation. |
| 116 | if (!getAuxTarget() && |
| 117 | (getLangOpts().CUDA || getLangOpts().isTargetDevice()) && |
| 118 | !getFrontendOpts().AuxTriple.empty()) { |
| 119 | auto &TO = AuxTargetOpts = std::make_unique<TargetOptions>(); |
| 120 | TO->Triple = llvm::Triple::normalize(Str: getFrontendOpts().AuxTriple); |
| 121 | if (getFrontendOpts().AuxTargetCPU) |
| 122 | TO->CPU = *getFrontendOpts().AuxTargetCPU; |
| 123 | if (getFrontendOpts().AuxTargetFeatures) |
| 124 | TO->FeaturesAsWritten = *getFrontendOpts().AuxTargetFeatures; |
| 125 | TO->HostTriple = getTarget().getTriple().str(); |
| 126 | setAuxTarget(TargetInfo::CreateTargetInfo(Diags&: getDiagnostics(), Opts&: *TO)); |
| 127 | } |
| 128 | |
| 129 | if (!getTarget().hasStrictFP() && !getLangOpts().ExpStrictFP) { |
| 130 | if (getLangOpts().RoundingMath) { |
| 131 | getDiagnostics().Report(DiagID: diag::warn_fe_backend_unsupported_fp_rounding); |
| 132 | getLangOpts().RoundingMath = false; |
| 133 | } |
| 134 | auto FPExc = getLangOpts().getFPExceptionMode(); |
| 135 | if (FPExc != LangOptions::FPE_Default && FPExc != LangOptions::FPE_Ignore) { |
| 136 | getDiagnostics().Report(DiagID: diag::warn_fe_backend_unsupported_fp_exceptions); |
| 137 | getLangOpts().setFPExceptionMode(LangOptions::FPE_Ignore); |
| 138 | } |
| 139 | // FIXME: can we disable FEnvAccess? |
| 140 | } |
| 141 | |
| 142 | // We should do it here because target knows nothing about |
| 143 | // language options when it's being created. |
| 144 | if (getLangOpts().OpenCL && |
| 145 | !getTarget().validateOpenCLTarget(Opts: getLangOpts(), Diags&: getDiagnostics())) |
| 146 | return false; |
| 147 | |
| 148 | // Inform the target of the language options. |
| 149 | // FIXME: We shouldn't need to do this, the target should be immutable once |
| 150 | // created. This complexity should be lifted elsewhere. |
| 151 | getTarget().adjust(Diags&: getDiagnostics(), Opts&: getLangOpts()); |
| 152 | |
| 153 | if (auto *Aux = getAuxTarget()) |
| 154 | getTarget().setAuxTarget(Aux); |
| 155 | |
| 156 | return true; |
| 157 | } |
| 158 | |
| 159 | llvm::vfs::FileSystem &CompilerInstance::getVirtualFileSystem() const { |
| 160 | return getFileManager().getVirtualFileSystem(); |
| 161 | } |
| 162 | |
| 163 | void CompilerInstance::setFileManager(FileManager *Value) { |
| 164 | FileMgr = Value; |
| 165 | } |
| 166 | |
| 167 | void CompilerInstance::setSourceManager(SourceManager *Value) { |
| 168 | SourceMgr = Value; |
| 169 | } |
| 170 | |
| 171 | void CompilerInstance::setPreprocessor(std::shared_ptr<Preprocessor> Value) { |
| 172 | PP = std::move(Value); |
| 173 | } |
| 174 | |
| 175 | void CompilerInstance::setASTContext(ASTContext *Value) { |
| 176 | Context = Value; |
| 177 | |
| 178 | if (Context && Consumer) |
| 179 | getASTConsumer().Initialize(Context&: getASTContext()); |
| 180 | } |
| 181 | |
| 182 | void CompilerInstance::setSema(Sema *S) { |
| 183 | TheSema.reset(p: S); |
| 184 | } |
| 185 | |
| 186 | void CompilerInstance::setASTConsumer(std::unique_ptr<ASTConsumer> Value) { |
| 187 | Consumer = std::move(Value); |
| 188 | |
| 189 | if (Context && Consumer) |
| 190 | getASTConsumer().Initialize(Context&: getASTContext()); |
| 191 | } |
| 192 | |
| 193 | void CompilerInstance::setCodeCompletionConsumer(CodeCompleteConsumer *Value) { |
| 194 | CompletionConsumer.reset(p: Value); |
| 195 | } |
| 196 | |
| 197 | std::unique_ptr<Sema> CompilerInstance::takeSema() { |
| 198 | return std::move(TheSema); |
| 199 | } |
| 200 | |
| 201 | IntrusiveRefCntPtr<ASTReader> CompilerInstance::getASTReader() const { |
| 202 | return TheASTReader; |
| 203 | } |
| 204 | void CompilerInstance::setASTReader(IntrusiveRefCntPtr<ASTReader> Reader) { |
| 205 | assert(ModCache.get() == &Reader->getModuleManager().getModuleCache() && |
| 206 | "Expected ASTReader to use the same PCM cache" ); |
| 207 | TheASTReader = std::move(Reader); |
| 208 | } |
| 209 | |
| 210 | std::shared_ptr<ModuleDependencyCollector> |
| 211 | CompilerInstance::getModuleDepCollector() const { |
| 212 | return ModuleDepCollector; |
| 213 | } |
| 214 | |
| 215 | void CompilerInstance::setModuleDepCollector( |
| 216 | std::shared_ptr<ModuleDependencyCollector> Collector) { |
| 217 | ModuleDepCollector = std::move(Collector); |
| 218 | } |
| 219 | |
| 220 | static void (const HeaderSearch &HS, |
| 221 | std::shared_ptr<ModuleDependencyCollector> MDC) { |
| 222 | SmallVector<std::string, 4> ; |
| 223 | HS.getHeaderMapFileNames(Names&: HeaderMapFileNames); |
| 224 | for (auto &Name : HeaderMapFileNames) |
| 225 | MDC->addFile(Filename: Name); |
| 226 | } |
| 227 | |
| 228 | static void collectIncludePCH(CompilerInstance &CI, |
| 229 | std::shared_ptr<ModuleDependencyCollector> MDC) { |
| 230 | const PreprocessorOptions &PPOpts = CI.getPreprocessorOpts(); |
| 231 | if (PPOpts.ImplicitPCHInclude.empty()) |
| 232 | return; |
| 233 | |
| 234 | StringRef PCHInclude = PPOpts.ImplicitPCHInclude; |
| 235 | FileManager &FileMgr = CI.getFileManager(); |
| 236 | auto PCHDir = FileMgr.getOptionalDirectoryRef(DirName: PCHInclude); |
| 237 | if (!PCHDir) { |
| 238 | MDC->addFile(Filename: PCHInclude); |
| 239 | return; |
| 240 | } |
| 241 | |
| 242 | std::error_code EC; |
| 243 | SmallString<128> DirNative; |
| 244 | llvm::sys::path::native(path: PCHDir->getName(), result&: DirNative); |
| 245 | llvm::vfs::FileSystem &FS = FileMgr.getVirtualFileSystem(); |
| 246 | SimpleASTReaderListener Validator(CI.getPreprocessor()); |
| 247 | for (llvm::vfs::directory_iterator Dir = FS.dir_begin(Dir: DirNative, EC), DirEnd; |
| 248 | Dir != DirEnd && !EC; Dir.increment(EC)) { |
| 249 | // Check whether this is an AST file. ASTReader::isAcceptableASTFile is not |
| 250 | // used here since we're not interested in validating the PCH at this time, |
| 251 | // but only to check whether this is a file containing an AST. |
| 252 | if (!ASTReader::readASTFileControlBlock( |
| 253 | Filename: Dir->path(), FileMgr, ModCache: CI.getModuleCache(), |
| 254 | PCHContainerRdr: CI.getPCHContainerReader(), |
| 255 | /*FindModuleFileExtensions=*/false, Listener&: Validator, |
| 256 | /*ValidateDiagnosticOptions=*/false)) |
| 257 | MDC->addFile(Filename: Dir->path()); |
| 258 | } |
| 259 | } |
| 260 | |
| 261 | static void collectVFSEntries(CompilerInstance &CI, |
| 262 | std::shared_ptr<ModuleDependencyCollector> MDC) { |
| 263 | if (CI.getHeaderSearchOpts().VFSOverlayFiles.empty()) |
| 264 | return; |
| 265 | |
| 266 | // Collect all VFS found. |
| 267 | SmallVector<llvm::vfs::YAMLVFSEntry, 16> VFSEntries; |
| 268 | for (const std::string &VFSFile : CI.getHeaderSearchOpts().VFSOverlayFiles) { |
| 269 | llvm::ErrorOr<std::unique_ptr<llvm::MemoryBuffer>> Buffer = |
| 270 | llvm::MemoryBuffer::getFile(Filename: VFSFile); |
| 271 | if (!Buffer) |
| 272 | return; |
| 273 | llvm::vfs::collectVFSFromYAML(Buffer: std::move(Buffer.get()), |
| 274 | /*DiagHandler*/ nullptr, YAMLFilePath: VFSFile, CollectedEntries&: VFSEntries); |
| 275 | } |
| 276 | |
| 277 | for (auto &E : VFSEntries) |
| 278 | MDC->addFile(Filename: E.VPath, FileDst: E.RPath); |
| 279 | } |
| 280 | |
| 281 | // Diagnostics |
| 282 | static void SetUpDiagnosticLog(DiagnosticOptions &DiagOpts, |
| 283 | const CodeGenOptions *CodeGenOpts, |
| 284 | DiagnosticsEngine &Diags) { |
| 285 | std::error_code EC; |
| 286 | std::unique_ptr<raw_ostream> StreamOwner; |
| 287 | raw_ostream *OS = &llvm::errs(); |
| 288 | if (DiagOpts.DiagnosticLogFile != "-" ) { |
| 289 | // Create the output stream. |
| 290 | auto FileOS = std::make_unique<llvm::raw_fd_ostream>( |
| 291 | args&: DiagOpts.DiagnosticLogFile, args&: EC, |
| 292 | args: llvm::sys::fs::OF_Append | llvm::sys::fs::OF_TextWithCRLF); |
| 293 | if (EC) { |
| 294 | Diags.Report(DiagID: diag::warn_fe_cc_log_diagnostics_failure) |
| 295 | << DiagOpts.DiagnosticLogFile << EC.message(); |
| 296 | } else { |
| 297 | FileOS->SetUnbuffered(); |
| 298 | OS = FileOS.get(); |
| 299 | StreamOwner = std::move(FileOS); |
| 300 | } |
| 301 | } |
| 302 | |
| 303 | // Chain in the diagnostic client which will log the diagnostics. |
| 304 | auto Logger = std::make_unique<LogDiagnosticPrinter>(args&: *OS, args&: DiagOpts, |
| 305 | args: std::move(StreamOwner)); |
| 306 | if (CodeGenOpts) |
| 307 | Logger->setDwarfDebugFlags(CodeGenOpts->DwarfDebugFlags); |
| 308 | if (Diags.ownsClient()) { |
| 309 | Diags.setClient( |
| 310 | client: new ChainedDiagnosticConsumer(Diags.takeClient(), std::move(Logger))); |
| 311 | } else { |
| 312 | Diags.setClient( |
| 313 | client: new ChainedDiagnosticConsumer(Diags.getClient(), std::move(Logger))); |
| 314 | } |
| 315 | } |
| 316 | |
| 317 | static void SetupSerializedDiagnostics(DiagnosticOptions &DiagOpts, |
| 318 | DiagnosticsEngine &Diags, |
| 319 | StringRef OutputFile) { |
| 320 | auto SerializedConsumer = |
| 321 | clang::serialized_diags::create(OutputFile, DiagOpts); |
| 322 | |
| 323 | if (Diags.ownsClient()) { |
| 324 | Diags.setClient(client: new ChainedDiagnosticConsumer( |
| 325 | Diags.takeClient(), std::move(SerializedConsumer))); |
| 326 | } else { |
| 327 | Diags.setClient(client: new ChainedDiagnosticConsumer( |
| 328 | Diags.getClient(), std::move(SerializedConsumer))); |
| 329 | } |
| 330 | } |
| 331 | |
| 332 | void CompilerInstance::createDiagnostics(llvm::vfs::FileSystem &VFS, |
| 333 | DiagnosticConsumer *Client, |
| 334 | bool ShouldOwnClient) { |
| 335 | Diagnostics = createDiagnostics(VFS, Opts&: getDiagnosticOpts(), Client, |
| 336 | ShouldOwnClient, CodeGenOpts: &getCodeGenOpts()); |
| 337 | } |
| 338 | |
| 339 | IntrusiveRefCntPtr<DiagnosticsEngine> CompilerInstance::createDiagnostics( |
| 340 | llvm::vfs::FileSystem &VFS, DiagnosticOptions &Opts, |
| 341 | DiagnosticConsumer *Client, bool ShouldOwnClient, |
| 342 | const CodeGenOptions *CodeGenOpts) { |
| 343 | IntrusiveRefCntPtr<DiagnosticIDs> DiagID(new DiagnosticIDs()); |
| 344 | IntrusiveRefCntPtr<DiagnosticsEngine> Diags( |
| 345 | new DiagnosticsEngine(DiagID, Opts)); |
| 346 | |
| 347 | // Create the diagnostic client for reporting errors or for |
| 348 | // implementing -verify. |
| 349 | if (Client) { |
| 350 | Diags->setClient(client: Client, ShouldOwnClient); |
| 351 | } else if (Opts.getFormat() == DiagnosticOptions::SARIF) { |
| 352 | Diags->setClient(client: new SARIFDiagnosticPrinter(llvm::errs(), Opts)); |
| 353 | } else |
| 354 | Diags->setClient(client: new TextDiagnosticPrinter(llvm::errs(), Opts)); |
| 355 | |
| 356 | // Chain in -verify checker, if requested. |
| 357 | if (Opts.VerifyDiagnostics) |
| 358 | Diags->setClient(client: new VerifyDiagnosticConsumer(*Diags)); |
| 359 | |
| 360 | // Chain in -diagnostic-log-file dumper, if requested. |
| 361 | if (!Opts.DiagnosticLogFile.empty()) |
| 362 | SetUpDiagnosticLog(DiagOpts&: Opts, CodeGenOpts, Diags&: *Diags); |
| 363 | |
| 364 | if (!Opts.DiagnosticSerializationFile.empty()) |
| 365 | SetupSerializedDiagnostics(DiagOpts&: Opts, Diags&: *Diags, OutputFile: Opts.DiagnosticSerializationFile); |
| 366 | |
| 367 | // Configure our handling of diagnostics. |
| 368 | ProcessWarningOptions(Diags&: *Diags, Opts, VFS); |
| 369 | |
| 370 | return Diags; |
| 371 | } |
| 372 | |
| 373 | // File Manager |
| 374 | |
| 375 | FileManager *CompilerInstance::createFileManager( |
| 376 | IntrusiveRefCntPtr<llvm::vfs::FileSystem> VFS) { |
| 377 | if (!VFS) |
| 378 | VFS = FileMgr ? &FileMgr->getVirtualFileSystem() |
| 379 | : createVFSFromCompilerInvocation(CI: getInvocation(), |
| 380 | Diags&: getDiagnostics()); |
| 381 | assert(VFS && "FileManager has no VFS?" ); |
| 382 | if (getFrontendOpts().ShowStats) |
| 383 | VFS = |
| 384 | llvm::makeIntrusiveRefCnt<llvm::vfs::TracingFileSystem>(A: std::move(VFS)); |
| 385 | FileMgr = new FileManager(getFileSystemOpts(), std::move(VFS)); |
| 386 | return FileMgr.get(); |
| 387 | } |
| 388 | |
| 389 | // Source Manager |
| 390 | |
| 391 | void CompilerInstance::createSourceManager(FileManager &FileMgr) { |
| 392 | SourceMgr = new SourceManager(getDiagnostics(), FileMgr); |
| 393 | } |
| 394 | |
| 395 | // Initialize the remapping of files to alternative contents, e.g., |
| 396 | // those specified through other files. |
| 397 | static void InitializeFileRemapping(DiagnosticsEngine &Diags, |
| 398 | SourceManager &SourceMgr, |
| 399 | FileManager &FileMgr, |
| 400 | const PreprocessorOptions &InitOpts) { |
| 401 | // Remap files in the source manager (with buffers). |
| 402 | for (const auto &RB : InitOpts.RemappedFileBuffers) { |
| 403 | // Create the file entry for the file that we're mapping from. |
| 404 | FileEntryRef FromFile = |
| 405 | FileMgr.getVirtualFileRef(Filename: RB.first, Size: RB.second->getBufferSize(), ModificationTime: 0); |
| 406 | |
| 407 | // Override the contents of the "from" file with the contents of the |
| 408 | // "to" file. If the caller owns the buffers, then pass a MemoryBufferRef; |
| 409 | // otherwise, pass as a std::unique_ptr<MemoryBuffer> to transfer ownership |
| 410 | // to the SourceManager. |
| 411 | if (InitOpts.RetainRemappedFileBuffers) |
| 412 | SourceMgr.overrideFileContents(SourceFile: FromFile, Buffer: RB.second->getMemBufferRef()); |
| 413 | else |
| 414 | SourceMgr.overrideFileContents( |
| 415 | SourceFile: FromFile, Buffer: std::unique_ptr<llvm::MemoryBuffer>(RB.second)); |
| 416 | } |
| 417 | |
| 418 | // Remap files in the source manager (with other files). |
| 419 | for (const auto &RF : InitOpts.RemappedFiles) { |
| 420 | // Find the file that we're mapping to. |
| 421 | OptionalFileEntryRef ToFile = FileMgr.getOptionalFileRef(Filename: RF.second); |
| 422 | if (!ToFile) { |
| 423 | Diags.Report(DiagID: diag::err_fe_remap_missing_to_file) << RF.first << RF.second; |
| 424 | continue; |
| 425 | } |
| 426 | |
| 427 | // Create the file entry for the file that we're mapping from. |
| 428 | FileEntryRef FromFile = |
| 429 | FileMgr.getVirtualFileRef(Filename: RF.first, Size: ToFile->getSize(), ModificationTime: 0); |
| 430 | |
| 431 | // Override the contents of the "from" file with the contents of |
| 432 | // the "to" file. |
| 433 | SourceMgr.overrideFileContents(SourceFile: FromFile, NewFile: *ToFile); |
| 434 | } |
| 435 | |
| 436 | SourceMgr.setOverridenFilesKeepOriginalName( |
| 437 | InitOpts.RemappedFilesKeepOriginalName); |
| 438 | } |
| 439 | |
| 440 | // Preprocessor |
| 441 | |
| 442 | void CompilerInstance::createPreprocessor(TranslationUnitKind TUKind) { |
| 443 | const PreprocessorOptions &PPOpts = getPreprocessorOpts(); |
| 444 | |
| 445 | // The AST reader holds a reference to the old preprocessor (if any). |
| 446 | TheASTReader.reset(); |
| 447 | |
| 448 | // Create the Preprocessor. |
| 449 | HeaderSearch * = |
| 450 | new HeaderSearch(getHeaderSearchOpts(), getSourceManager(), |
| 451 | getDiagnostics(), getLangOpts(), &getTarget()); |
| 452 | PP = std::make_shared<Preprocessor>(args&: Invocation->getPreprocessorOpts(), |
| 453 | args&: getDiagnostics(), args&: getLangOpts(), |
| 454 | args&: getSourceManager(), args&: *HeaderInfo, args&: *this, |
| 455 | /*IdentifierInfoLookup=*/args: nullptr, |
| 456 | /*OwnsHeaderSearch=*/args: true, args&: TUKind); |
| 457 | getTarget().adjust(Diags&: getDiagnostics(), Opts&: getLangOpts()); |
| 458 | PP->Initialize(Target: getTarget(), AuxTarget: getAuxTarget()); |
| 459 | |
| 460 | if (PPOpts.DetailedRecord) |
| 461 | PP->createPreprocessingRecord(); |
| 462 | |
| 463 | // Apply remappings to the source manager. |
| 464 | InitializeFileRemapping(Diags&: PP->getDiagnostics(), SourceMgr&: PP->getSourceManager(), |
| 465 | FileMgr&: PP->getFileManager(), InitOpts: PPOpts); |
| 466 | |
| 467 | // Predefine macros and configure the preprocessor. |
| 468 | InitializePreprocessor(PP&: *PP, PPOpts, PCHContainerRdr: getPCHContainerReader(), |
| 469 | FEOpts: getFrontendOpts(), CodeGenOpts: getCodeGenOpts()); |
| 470 | |
| 471 | // Initialize the header search object. In CUDA compilations, we use the aux |
| 472 | // triple (the host triple) to initialize our header search, since we need to |
| 473 | // find the host headers in order to compile the CUDA code. |
| 474 | const llvm::Triple * = &PP->getTargetInfo().getTriple(); |
| 475 | if (PP->getTargetInfo().getTriple().getOS() == llvm::Triple::CUDA && |
| 476 | PP->getAuxTargetInfo()) |
| 477 | HeaderSearchTriple = &PP->getAuxTargetInfo()->getTriple(); |
| 478 | |
| 479 | ApplyHeaderSearchOptions(HS&: PP->getHeaderSearchInfo(), HSOpts: getHeaderSearchOpts(), |
| 480 | Lang: PP->getLangOpts(), triple: *HeaderSearchTriple); |
| 481 | |
| 482 | PP->setPreprocessedOutput(getPreprocessorOutputOpts().ShowCPP); |
| 483 | |
| 484 | if (PP->getLangOpts().Modules && PP->getLangOpts().ImplicitModules) { |
| 485 | std::string ModuleHash = getInvocation().getModuleHash(); |
| 486 | PP->getHeaderSearchInfo().setModuleHash(ModuleHash); |
| 487 | PP->getHeaderSearchInfo().setModuleCachePath( |
| 488 | getSpecificModuleCachePath(ModuleHash)); |
| 489 | } |
| 490 | |
| 491 | // Handle generating dependencies, if requested. |
| 492 | const DependencyOutputOptions &DepOpts = getDependencyOutputOpts(); |
| 493 | if (!DepOpts.OutputFile.empty()) |
| 494 | addDependencyCollector(Listener: std::make_shared<DependencyFileGenerator>(args: DepOpts)); |
| 495 | if (!DepOpts.DOTOutputFile.empty()) |
| 496 | AttachDependencyGraphGen(PP&: *PP, OutputFile: DepOpts.DOTOutputFile, |
| 497 | SysRoot: getHeaderSearchOpts().Sysroot); |
| 498 | |
| 499 | // If we don't have a collector, but we are collecting module dependencies, |
| 500 | // then we're the top level compiler instance and need to create one. |
| 501 | if (!ModuleDepCollector && !DepOpts.ModuleDependencyOutputDir.empty()) { |
| 502 | ModuleDepCollector = std::make_shared<ModuleDependencyCollector>( |
| 503 | args: DepOpts.ModuleDependencyOutputDir); |
| 504 | } |
| 505 | |
| 506 | // If there is a module dep collector, register with other dep collectors |
| 507 | // and also (a) collect header maps and (b) TODO: input vfs overlay files. |
| 508 | if (ModuleDepCollector) { |
| 509 | addDependencyCollector(Listener: ModuleDepCollector); |
| 510 | collectHeaderMaps(HS: PP->getHeaderSearchInfo(), MDC: ModuleDepCollector); |
| 511 | collectIncludePCH(CI&: *this, MDC: ModuleDepCollector); |
| 512 | collectVFSEntries(CI&: *this, MDC: ModuleDepCollector); |
| 513 | } |
| 514 | |
| 515 | for (auto &Listener : DependencyCollectors) |
| 516 | Listener->attachToPreprocessor(PP&: *PP); |
| 517 | |
| 518 | // Handle generating header include information, if requested. |
| 519 | if (DepOpts.ShowHeaderIncludes) |
| 520 | AttachHeaderIncludeGen(PP&: *PP, DepOpts); |
| 521 | if (!DepOpts.HeaderIncludeOutputFile.empty()) { |
| 522 | StringRef OutputPath = DepOpts.HeaderIncludeOutputFile; |
| 523 | if (OutputPath == "-" ) |
| 524 | OutputPath = "" ; |
| 525 | AttachHeaderIncludeGen(PP&: *PP, DepOpts, |
| 526 | /*ShowAllHeaders=*/true, OutputPath, |
| 527 | /*ShowDepth=*/false); |
| 528 | } |
| 529 | |
| 530 | if (DepOpts.ShowIncludesDest != ShowIncludesDestination::None) { |
| 531 | AttachHeaderIncludeGen(PP&: *PP, DepOpts, |
| 532 | /*ShowAllHeaders=*/true, /*OutputPath=*/"" , |
| 533 | /*ShowDepth=*/true, /*MSStyle=*/true); |
| 534 | } |
| 535 | |
| 536 | if (GetDependencyDirectives) |
| 537 | PP->setDependencyDirectivesGetter(*GetDependencyDirectives); |
| 538 | } |
| 539 | |
| 540 | std::string CompilerInstance::getSpecificModuleCachePath(StringRef ModuleHash) { |
| 541 | // Set up the module path, including the hash for the module-creation options. |
| 542 | SmallString<256> SpecificModuleCache(getHeaderSearchOpts().ModuleCachePath); |
| 543 | if (!SpecificModuleCache.empty() && !getHeaderSearchOpts().DisableModuleHash) |
| 544 | llvm::sys::path::append(path&: SpecificModuleCache, a: ModuleHash); |
| 545 | return std::string(SpecificModuleCache); |
| 546 | } |
| 547 | |
| 548 | // ASTContext |
| 549 | |
| 550 | void CompilerInstance::createASTContext() { |
| 551 | Preprocessor &PP = getPreprocessor(); |
| 552 | auto *Context = new ASTContext(getLangOpts(), PP.getSourceManager(), |
| 553 | PP.getIdentifierTable(), PP.getSelectorTable(), |
| 554 | PP.getBuiltinInfo(), PP.TUKind); |
| 555 | Context->InitBuiltinTypes(Target: getTarget(), AuxTarget: getAuxTarget()); |
| 556 | setASTContext(Context); |
| 557 | } |
| 558 | |
| 559 | // ExternalASTSource |
| 560 | |
| 561 | namespace { |
| 562 | // Helper to recursively read the module names for all modules we're adding. |
| 563 | // We mark these as known and redirect any attempt to load that module to |
| 564 | // the files we were handed. |
| 565 | struct ReadModuleNames : ASTReaderListener { |
| 566 | Preprocessor &PP; |
| 567 | llvm::SmallVector<std::string, 8> LoadedModules; |
| 568 | |
| 569 | ReadModuleNames(Preprocessor &PP) : PP(PP) {} |
| 570 | |
| 571 | void ReadModuleName(StringRef ModuleName) override { |
| 572 | // Keep the module name as a string for now. It's not safe to create a new |
| 573 | // IdentifierInfo from an ASTReader callback. |
| 574 | LoadedModules.push_back(Elt: ModuleName.str()); |
| 575 | } |
| 576 | |
| 577 | void registerAll() { |
| 578 | ModuleMap &MM = PP.getHeaderSearchInfo().getModuleMap(); |
| 579 | for (const std::string &LoadedModule : LoadedModules) |
| 580 | MM.cacheModuleLoad(II: *PP.getIdentifierInfo(Name: LoadedModule), |
| 581 | M: MM.findOrLoadModule(Name: LoadedModule)); |
| 582 | LoadedModules.clear(); |
| 583 | } |
| 584 | |
| 585 | void markAllUnavailable() { |
| 586 | for (const std::string &LoadedModule : LoadedModules) { |
| 587 | if (Module *M = PP.getHeaderSearchInfo().getModuleMap().findOrLoadModule( |
| 588 | Name: LoadedModule)) { |
| 589 | M->HasIncompatibleModuleFile = true; |
| 590 | |
| 591 | // Mark module as available if the only reason it was unavailable |
| 592 | // was missing headers. |
| 593 | SmallVector<Module *, 2> Stack; |
| 594 | Stack.push_back(Elt: M); |
| 595 | while (!Stack.empty()) { |
| 596 | Module *Current = Stack.pop_back_val(); |
| 597 | if (Current->IsUnimportable) continue; |
| 598 | Current->IsAvailable = true; |
| 599 | auto SubmodulesRange = Current->submodules(); |
| 600 | llvm::append_range(C&: Stack, R&: SubmodulesRange); |
| 601 | } |
| 602 | } |
| 603 | } |
| 604 | LoadedModules.clear(); |
| 605 | } |
| 606 | }; |
| 607 | } // namespace |
| 608 | |
| 609 | void CompilerInstance::createPCHExternalASTSource( |
| 610 | StringRef Path, DisableValidationForModuleKind DisableValidation, |
| 611 | bool AllowPCHWithCompilerErrors, void *DeserializationListener, |
| 612 | bool OwnDeserializationListener) { |
| 613 | bool Preamble = getPreprocessorOpts().PrecompiledPreambleBytes.first != 0; |
| 614 | TheASTReader = createPCHExternalASTSource( |
| 615 | Path, Sysroot: getHeaderSearchOpts().Sysroot, DisableValidation, |
| 616 | AllowPCHWithCompilerErrors, PP&: getPreprocessor(), ModCache&: getModuleCache(), |
| 617 | Context&: getASTContext(), PCHContainerRdr: getPCHContainerReader(), |
| 618 | Extensions: getFrontendOpts().ModuleFileExtensions, DependencyCollectors, |
| 619 | DeserializationListener, OwnDeserializationListener, Preamble, |
| 620 | UseGlobalModuleIndex: getFrontendOpts().UseGlobalModuleIndex); |
| 621 | } |
| 622 | |
| 623 | IntrusiveRefCntPtr<ASTReader> CompilerInstance::createPCHExternalASTSource( |
| 624 | StringRef Path, StringRef Sysroot, |
| 625 | DisableValidationForModuleKind DisableValidation, |
| 626 | bool AllowPCHWithCompilerErrors, Preprocessor &PP, ModuleCache &ModCache, |
| 627 | ASTContext &Context, const PCHContainerReader &PCHContainerRdr, |
| 628 | ArrayRef<std::shared_ptr<ModuleFileExtension>> Extensions, |
| 629 | ArrayRef<std::shared_ptr<DependencyCollector>> DependencyCollectors, |
| 630 | void *DeserializationListener, bool OwnDeserializationListener, |
| 631 | bool Preamble, bool UseGlobalModuleIndex) { |
| 632 | const HeaderSearchOptions &HSOpts = |
| 633 | PP.getHeaderSearchInfo().getHeaderSearchOpts(); |
| 634 | |
| 635 | IntrusiveRefCntPtr<ASTReader> Reader(new ASTReader( |
| 636 | PP, ModCache, &Context, PCHContainerRdr, Extensions, |
| 637 | Sysroot.empty() ? "" : Sysroot.data(), DisableValidation, |
| 638 | AllowPCHWithCompilerErrors, /*AllowConfigurationMismatch*/ false, |
| 639 | HSOpts.ModulesValidateSystemHeaders, |
| 640 | HSOpts.ModulesForceValidateUserHeaders, |
| 641 | HSOpts.ValidateASTInputFilesContent, UseGlobalModuleIndex)); |
| 642 | |
| 643 | // We need the external source to be set up before we read the AST, because |
| 644 | // eagerly-deserialized declarations may use it. |
| 645 | Context.setExternalSource(Reader.get()); |
| 646 | |
| 647 | Reader->setDeserializationListener( |
| 648 | Listener: static_cast<ASTDeserializationListener *>(DeserializationListener), |
| 649 | /*TakeOwnership=*/OwnDeserializationListener); |
| 650 | |
| 651 | for (auto &Listener : DependencyCollectors) |
| 652 | Listener->attachToASTReader(R&: *Reader); |
| 653 | |
| 654 | auto Listener = std::make_unique<ReadModuleNames>(args&: PP); |
| 655 | auto &ListenerRef = *Listener; |
| 656 | ASTReader::ListenerScope ReadModuleNamesListener(*Reader, |
| 657 | std::move(Listener)); |
| 658 | |
| 659 | switch (Reader->ReadAST(FileName: Path, |
| 660 | Type: Preamble ? serialization::MK_Preamble |
| 661 | : serialization::MK_PCH, |
| 662 | ImportLoc: SourceLocation(), |
| 663 | ClientLoadCapabilities: ASTReader::ARR_None)) { |
| 664 | case ASTReader::Success: |
| 665 | // Set the predefines buffer as suggested by the PCH reader. Typically, the |
| 666 | // predefines buffer will be empty. |
| 667 | PP.setPredefines(Reader->getSuggestedPredefines()); |
| 668 | ListenerRef.registerAll(); |
| 669 | return Reader; |
| 670 | |
| 671 | case ASTReader::Failure: |
| 672 | // Unrecoverable failure: don't even try to process the input file. |
| 673 | break; |
| 674 | |
| 675 | case ASTReader::Missing: |
| 676 | case ASTReader::OutOfDate: |
| 677 | case ASTReader::VersionMismatch: |
| 678 | case ASTReader::ConfigurationMismatch: |
| 679 | case ASTReader::HadErrors: |
| 680 | // No suitable PCH file could be found. Return an error. |
| 681 | break; |
| 682 | } |
| 683 | |
| 684 | ListenerRef.markAllUnavailable(); |
| 685 | Context.setExternalSource(nullptr); |
| 686 | return nullptr; |
| 687 | } |
| 688 | |
| 689 | // Code Completion |
| 690 | |
| 691 | static bool EnableCodeCompletion(Preprocessor &PP, |
| 692 | StringRef Filename, |
| 693 | unsigned Line, |
| 694 | unsigned Column) { |
| 695 | // Tell the source manager to chop off the given file at a specific |
| 696 | // line and column. |
| 697 | auto Entry = PP.getFileManager().getOptionalFileRef(Filename); |
| 698 | if (!Entry) { |
| 699 | PP.getDiagnostics().Report(DiagID: diag::err_fe_invalid_code_complete_file) |
| 700 | << Filename; |
| 701 | return true; |
| 702 | } |
| 703 | |
| 704 | // Truncate the named file at the given line/column. |
| 705 | PP.SetCodeCompletionPoint(File: *Entry, Line, Column); |
| 706 | return false; |
| 707 | } |
| 708 | |
| 709 | void CompilerInstance::createCodeCompletionConsumer() { |
| 710 | const ParsedSourceLocation &Loc = getFrontendOpts().CodeCompletionAt; |
| 711 | if (!CompletionConsumer) { |
| 712 | setCodeCompletionConsumer(createCodeCompletionConsumer( |
| 713 | PP&: getPreprocessor(), Filename: Loc.FileName, Line: Loc.Line, Column: Loc.Column, |
| 714 | Opts: getFrontendOpts().CodeCompleteOpts, OS&: llvm::outs())); |
| 715 | return; |
| 716 | } else if (EnableCodeCompletion(PP&: getPreprocessor(), Filename: Loc.FileName, |
| 717 | Line: Loc.Line, Column: Loc.Column)) { |
| 718 | setCodeCompletionConsumer(nullptr); |
| 719 | return; |
| 720 | } |
| 721 | } |
| 722 | |
| 723 | void CompilerInstance::createFrontendTimer() { |
| 724 | timerGroup.reset(p: new llvm::TimerGroup("clang" , "Clang time report" )); |
| 725 | FrontendTimer.reset(p: new llvm::Timer("frontend" , "Front end" , *timerGroup)); |
| 726 | } |
| 727 | |
| 728 | CodeCompleteConsumer * |
| 729 | CompilerInstance::createCodeCompletionConsumer(Preprocessor &PP, |
| 730 | StringRef Filename, |
| 731 | unsigned Line, |
| 732 | unsigned Column, |
| 733 | const CodeCompleteOptions &Opts, |
| 734 | raw_ostream &OS) { |
| 735 | if (EnableCodeCompletion(PP, Filename, Line, Column)) |
| 736 | return nullptr; |
| 737 | |
| 738 | // Set up the creation routine for code-completion. |
| 739 | return new PrintingCodeCompleteConsumer(Opts, OS); |
| 740 | } |
| 741 | |
| 742 | void CompilerInstance::createSema(TranslationUnitKind TUKind, |
| 743 | CodeCompleteConsumer *CompletionConsumer) { |
| 744 | TheSema.reset(p: new Sema(getPreprocessor(), getASTContext(), getASTConsumer(), |
| 745 | TUKind, CompletionConsumer)); |
| 746 | |
| 747 | // Set up API notes. |
| 748 | TheSema->APINotes.setSwiftVersion(getAPINotesOpts().SwiftVersion); |
| 749 | |
| 750 | // Attach the external sema source if there is any. |
| 751 | if (ExternalSemaSrc) { |
| 752 | TheSema->addExternalSource(E: ExternalSemaSrc.get()); |
| 753 | ExternalSemaSrc->InitializeSema(S&: *TheSema); |
| 754 | } |
| 755 | |
| 756 | // If we're building a module and are supposed to load API notes, |
| 757 | // notify the API notes manager. |
| 758 | if (auto *currentModule = getPreprocessor().getCurrentModule()) { |
| 759 | (void)TheSema->APINotes.loadCurrentModuleAPINotes( |
| 760 | M: currentModule, LookInModule: getLangOpts().APINotesModules, |
| 761 | SearchPaths: getAPINotesOpts().ModuleSearchPaths); |
| 762 | } |
| 763 | } |
| 764 | |
| 765 | // Output Files |
| 766 | |
| 767 | void CompilerInstance::clearOutputFiles(bool EraseFiles) { |
| 768 | // The ASTConsumer can own streams that write to the output files. |
| 769 | assert(!hasASTConsumer() && "ASTConsumer should be reset" ); |
| 770 | // Ignore errors that occur when trying to discard the temp file. |
| 771 | for (OutputFile &OF : OutputFiles) { |
| 772 | if (EraseFiles) { |
| 773 | if (OF.File) |
| 774 | consumeError(Err: OF.File->discard()); |
| 775 | if (!OF.Filename.empty()) |
| 776 | llvm::sys::fs::remove(path: OF.Filename); |
| 777 | continue; |
| 778 | } |
| 779 | |
| 780 | if (!OF.File) |
| 781 | continue; |
| 782 | |
| 783 | if (OF.File->TmpName.empty()) { |
| 784 | consumeError(Err: OF.File->discard()); |
| 785 | continue; |
| 786 | } |
| 787 | |
| 788 | llvm::Error E = OF.File->keep(Name: OF.Filename); |
| 789 | if (!E) |
| 790 | continue; |
| 791 | |
| 792 | getDiagnostics().Report(DiagID: diag::err_unable_to_rename_temp) |
| 793 | << OF.File->TmpName << OF.Filename << std::move(E); |
| 794 | |
| 795 | llvm::sys::fs::remove(path: OF.File->TmpName); |
| 796 | } |
| 797 | OutputFiles.clear(); |
| 798 | if (DeleteBuiltModules) { |
| 799 | for (auto &Module : BuiltModules) |
| 800 | llvm::sys::fs::remove(path: Module.second); |
| 801 | BuiltModules.clear(); |
| 802 | } |
| 803 | } |
| 804 | |
| 805 | std::unique_ptr<raw_pwrite_stream> CompilerInstance::createDefaultOutputFile( |
| 806 | bool Binary, StringRef InFile, StringRef Extension, bool RemoveFileOnSignal, |
| 807 | bool CreateMissingDirectories, bool ForceUseTemporary) { |
| 808 | StringRef OutputPath = getFrontendOpts().OutputFile; |
| 809 | std::optional<SmallString<128>> PathStorage; |
| 810 | if (OutputPath.empty()) { |
| 811 | if (InFile == "-" || Extension.empty()) { |
| 812 | OutputPath = "-" ; |
| 813 | } else { |
| 814 | PathStorage.emplace(args&: InFile); |
| 815 | llvm::sys::path::replace_extension(path&: *PathStorage, extension: Extension); |
| 816 | OutputPath = *PathStorage; |
| 817 | } |
| 818 | } |
| 819 | |
| 820 | return createOutputFile(OutputPath, Binary, RemoveFileOnSignal, |
| 821 | UseTemporary: getFrontendOpts().UseTemporary || ForceUseTemporary, |
| 822 | CreateMissingDirectories); |
| 823 | } |
| 824 | |
| 825 | std::unique_ptr<raw_pwrite_stream> CompilerInstance::createNullOutputFile() { |
| 826 | return std::make_unique<llvm::raw_null_ostream>(); |
| 827 | } |
| 828 | |
| 829 | std::unique_ptr<raw_pwrite_stream> |
| 830 | CompilerInstance::createOutputFile(StringRef OutputPath, bool Binary, |
| 831 | bool RemoveFileOnSignal, bool UseTemporary, |
| 832 | bool CreateMissingDirectories) { |
| 833 | Expected<std::unique_ptr<raw_pwrite_stream>> OS = |
| 834 | createOutputFileImpl(OutputPath, Binary, RemoveFileOnSignal, UseTemporary, |
| 835 | CreateMissingDirectories); |
| 836 | if (OS) |
| 837 | return std::move(*OS); |
| 838 | getDiagnostics().Report(DiagID: diag::err_fe_unable_to_open_output) |
| 839 | << OutputPath << errorToErrorCode(Err: OS.takeError()).message(); |
| 840 | return nullptr; |
| 841 | } |
| 842 | |
| 843 | Expected<std::unique_ptr<llvm::raw_pwrite_stream>> |
| 844 | CompilerInstance::createOutputFileImpl(StringRef OutputPath, bool Binary, |
| 845 | bool RemoveFileOnSignal, |
| 846 | bool UseTemporary, |
| 847 | bool CreateMissingDirectories) { |
| 848 | assert((!CreateMissingDirectories || UseTemporary) && |
| 849 | "CreateMissingDirectories is only allowed when using temporary files" ); |
| 850 | |
| 851 | // If '-working-directory' was passed, the output filename should be |
| 852 | // relative to that. |
| 853 | std::optional<SmallString<128>> AbsPath; |
| 854 | if (OutputPath != "-" && !llvm::sys::path::is_absolute(path: OutputPath)) { |
| 855 | assert(hasFileManager() && |
| 856 | "File Manager is required to fix up relative path.\n" ); |
| 857 | |
| 858 | AbsPath.emplace(args&: OutputPath); |
| 859 | FileMgr->FixupRelativePath(path&: *AbsPath); |
| 860 | OutputPath = *AbsPath; |
| 861 | } |
| 862 | |
| 863 | std::unique_ptr<llvm::raw_fd_ostream> OS; |
| 864 | std::optional<StringRef> OSFile; |
| 865 | |
| 866 | if (UseTemporary) { |
| 867 | if (OutputPath == "-" ) |
| 868 | UseTemporary = false; |
| 869 | else { |
| 870 | llvm::sys::fs::file_status Status; |
| 871 | llvm::sys::fs::status(path: OutputPath, result&: Status); |
| 872 | if (llvm::sys::fs::exists(status: Status)) { |
| 873 | // Fail early if we can't write to the final destination. |
| 874 | if (!llvm::sys::fs::can_write(Path: OutputPath)) |
| 875 | return llvm::errorCodeToError( |
| 876 | EC: make_error_code(E: llvm::errc::operation_not_permitted)); |
| 877 | |
| 878 | // Don't use a temporary if the output is a special file. This handles |
| 879 | // things like '-o /dev/null' |
| 880 | if (!llvm::sys::fs::is_regular_file(status: Status)) |
| 881 | UseTemporary = false; |
| 882 | } |
| 883 | } |
| 884 | } |
| 885 | |
| 886 | std::optional<llvm::sys::fs::TempFile> Temp; |
| 887 | if (UseTemporary) { |
| 888 | // Create a temporary file. |
| 889 | // Insert -%%%%%%%% before the extension (if any), and because some tools |
| 890 | // (noticeable, clang's own GlobalModuleIndex.cpp) glob for build |
| 891 | // artifacts, also append .tmp. |
| 892 | StringRef OutputExtension = llvm::sys::path::extension(path: OutputPath); |
| 893 | SmallString<128> TempPath = |
| 894 | StringRef(OutputPath).drop_back(N: OutputExtension.size()); |
| 895 | TempPath += "-%%%%%%%%" ; |
| 896 | TempPath += OutputExtension; |
| 897 | TempPath += ".tmp" ; |
| 898 | llvm::sys::fs::OpenFlags BinaryFlags = |
| 899 | Binary ? llvm::sys::fs::OF_None : llvm::sys::fs::OF_Text; |
| 900 | Expected<llvm::sys::fs::TempFile> ExpectedFile = |
| 901 | llvm::sys::fs::TempFile::create( |
| 902 | Model: TempPath, Mode: llvm::sys::fs::all_read | llvm::sys::fs::all_write, |
| 903 | ExtraFlags: BinaryFlags); |
| 904 | |
| 905 | llvm::Error E = handleErrors( |
| 906 | E: ExpectedFile.takeError(), Hs: [&](const llvm::ECError &E) -> llvm::Error { |
| 907 | std::error_code EC = E.convertToErrorCode(); |
| 908 | if (CreateMissingDirectories && |
| 909 | EC == llvm::errc::no_such_file_or_directory) { |
| 910 | StringRef Parent = llvm::sys::path::parent_path(path: OutputPath); |
| 911 | EC = llvm::sys::fs::create_directories(path: Parent); |
| 912 | if (!EC) { |
| 913 | ExpectedFile = llvm::sys::fs::TempFile::create( |
| 914 | Model: TempPath, Mode: llvm::sys::fs::all_read | llvm::sys::fs::all_write, |
| 915 | ExtraFlags: BinaryFlags); |
| 916 | if (!ExpectedFile) |
| 917 | return llvm::errorCodeToError( |
| 918 | EC: llvm::errc::no_such_file_or_directory); |
| 919 | } |
| 920 | } |
| 921 | return llvm::errorCodeToError(EC); |
| 922 | }); |
| 923 | |
| 924 | if (E) { |
| 925 | consumeError(Err: std::move(E)); |
| 926 | } else { |
| 927 | Temp = std::move(ExpectedFile.get()); |
| 928 | OS.reset(p: new llvm::raw_fd_ostream(Temp->FD, /*shouldClose=*/false)); |
| 929 | OSFile = Temp->TmpName; |
| 930 | } |
| 931 | // If we failed to create the temporary, fallback to writing to the file |
| 932 | // directly. This handles the corner case where we cannot write to the |
| 933 | // directory, but can write to the file. |
| 934 | } |
| 935 | |
| 936 | if (!OS) { |
| 937 | OSFile = OutputPath; |
| 938 | std::error_code EC; |
| 939 | OS.reset(p: new llvm::raw_fd_ostream( |
| 940 | *OSFile, EC, |
| 941 | (Binary ? llvm::sys::fs::OF_None : llvm::sys::fs::OF_TextWithCRLF))); |
| 942 | if (EC) |
| 943 | return llvm::errorCodeToError(EC); |
| 944 | } |
| 945 | |
| 946 | // Add the output file -- but don't try to remove "-", since this means we are |
| 947 | // using stdin. |
| 948 | OutputFiles.emplace_back(args: ((OutputPath != "-" ) ? OutputPath : "" ).str(), |
| 949 | args: std::move(Temp)); |
| 950 | |
| 951 | if (!Binary || OS->supportsSeeking()) |
| 952 | return std::move(OS); |
| 953 | |
| 954 | return std::make_unique<llvm::buffer_unique_ostream>(args: std::move(OS)); |
| 955 | } |
| 956 | |
| 957 | // Initialization Utilities |
| 958 | |
| 959 | bool CompilerInstance::InitializeSourceManager(const FrontendInputFile &Input){ |
| 960 | return InitializeSourceManager(Input, Diags&: getDiagnostics(), FileMgr&: getFileManager(), |
| 961 | SourceMgr&: getSourceManager()); |
| 962 | } |
| 963 | |
| 964 | // static |
| 965 | bool CompilerInstance::InitializeSourceManager(const FrontendInputFile &Input, |
| 966 | DiagnosticsEngine &Diags, |
| 967 | FileManager &FileMgr, |
| 968 | SourceManager &SourceMgr) { |
| 969 | SrcMgr::CharacteristicKind Kind = |
| 970 | Input.getKind().getFormat() == InputKind::ModuleMap |
| 971 | ? Input.isSystem() ? SrcMgr::C_System_ModuleMap |
| 972 | : SrcMgr::C_User_ModuleMap |
| 973 | : Input.isSystem() ? SrcMgr::C_System : SrcMgr::C_User; |
| 974 | |
| 975 | if (Input.isBuffer()) { |
| 976 | SourceMgr.setMainFileID(SourceMgr.createFileID(Buffer: Input.getBuffer(), FileCharacter: Kind)); |
| 977 | assert(SourceMgr.getMainFileID().isValid() && |
| 978 | "Couldn't establish MainFileID!" ); |
| 979 | return true; |
| 980 | } |
| 981 | |
| 982 | StringRef InputFile = Input.getFile(); |
| 983 | |
| 984 | // Figure out where to get and map in the main file. |
| 985 | auto FileOrErr = InputFile == "-" |
| 986 | ? FileMgr.getSTDIN() |
| 987 | : FileMgr.getFileRef(Filename: InputFile, /*OpenFile=*/true); |
| 988 | if (!FileOrErr) { |
| 989 | auto EC = llvm::errorToErrorCode(Err: FileOrErr.takeError()); |
| 990 | if (InputFile != "-" ) |
| 991 | Diags.Report(DiagID: diag::err_fe_error_reading) << InputFile << EC.message(); |
| 992 | else |
| 993 | Diags.Report(DiagID: diag::err_fe_error_reading_stdin) << EC.message(); |
| 994 | return false; |
| 995 | } |
| 996 | |
| 997 | SourceMgr.setMainFileID( |
| 998 | SourceMgr.createFileID(SourceFile: *FileOrErr, IncludePos: SourceLocation(), FileCharacter: Kind)); |
| 999 | |
| 1000 | assert(SourceMgr.getMainFileID().isValid() && |
| 1001 | "Couldn't establish MainFileID!" ); |
| 1002 | return true; |
| 1003 | } |
| 1004 | |
| 1005 | // High-Level Operations |
| 1006 | |
| 1007 | bool CompilerInstance::ExecuteAction(FrontendAction &Act) { |
| 1008 | assert(hasDiagnostics() && "Diagnostics engine is not initialized!" ); |
| 1009 | assert(!getFrontendOpts().ShowHelp && "Client must handle '-help'!" ); |
| 1010 | assert(!getFrontendOpts().ShowVersion && "Client must handle '-version'!" ); |
| 1011 | |
| 1012 | // Mark this point as the bottom of the stack if we don't have somewhere |
| 1013 | // better. We generally expect frontend actions to be invoked with (nearly) |
| 1014 | // DesiredStackSpace available. |
| 1015 | noteBottomOfStack(); |
| 1016 | |
| 1017 | auto FinishDiagnosticClient = llvm::make_scope_exit(F: [&]() { |
| 1018 | // Notify the diagnostic client that all files were processed. |
| 1019 | getDiagnosticClient().finish(); |
| 1020 | }); |
| 1021 | |
| 1022 | raw_ostream &OS = getVerboseOutputStream(); |
| 1023 | |
| 1024 | if (!Act.PrepareToExecute(CI&: *this)) |
| 1025 | return false; |
| 1026 | |
| 1027 | if (!createTarget()) |
| 1028 | return false; |
| 1029 | |
| 1030 | // rewriter project will change target built-in bool type from its default. |
| 1031 | if (getFrontendOpts().ProgramAction == frontend::RewriteObjC) |
| 1032 | getTarget().noSignedCharForObjCBool(); |
| 1033 | |
| 1034 | // Validate/process some options. |
| 1035 | if (getHeaderSearchOpts().Verbose) |
| 1036 | OS << "clang -cc1 version " CLANG_VERSION_STRING << " based upon LLVM " |
| 1037 | << LLVM_VERSION_STRING << " default target " |
| 1038 | << llvm::sys::getDefaultTargetTriple() << "\n" ; |
| 1039 | |
| 1040 | if (getFrontendOpts().ShowStats || !getFrontendOpts().StatsFile.empty()) |
| 1041 | llvm::EnableStatistics(DoPrintOnExit: false); |
| 1042 | |
| 1043 | // Sort vectors containing toc data and no toc data variables to facilitate |
| 1044 | // binary search later. |
| 1045 | llvm::sort(C&: getCodeGenOpts().TocDataVarsUserSpecified); |
| 1046 | llvm::sort(C&: getCodeGenOpts().NoTocDataVars); |
| 1047 | |
| 1048 | for (const FrontendInputFile &FIF : getFrontendOpts().Inputs) { |
| 1049 | // Reset the ID tables if we are reusing the SourceManager and parsing |
| 1050 | // regular files. |
| 1051 | if (hasSourceManager() && !Act.isModelParsingAction()) |
| 1052 | getSourceManager().clearIDTables(); |
| 1053 | |
| 1054 | if (Act.BeginSourceFile(CI&: *this, Input: FIF)) { |
| 1055 | if (llvm::Error Err = Act.Execute()) { |
| 1056 | consumeError(Err: std::move(Err)); // FIXME this drops errors on the floor. |
| 1057 | } |
| 1058 | Act.EndSourceFile(); |
| 1059 | } |
| 1060 | } |
| 1061 | |
| 1062 | printDiagnosticStats(); |
| 1063 | |
| 1064 | if (getFrontendOpts().ShowStats) { |
| 1065 | if (hasFileManager()) { |
| 1066 | getFileManager().PrintStats(); |
| 1067 | OS << '\n'; |
| 1068 | } |
| 1069 | llvm::PrintStatistics(OS); |
| 1070 | } |
| 1071 | StringRef StatsFile = getFrontendOpts().StatsFile; |
| 1072 | if (!StatsFile.empty()) { |
| 1073 | llvm::sys::fs::OpenFlags FileFlags = llvm::sys::fs::OF_TextWithCRLF; |
| 1074 | if (getFrontendOpts().AppendStats) |
| 1075 | FileFlags |= llvm::sys::fs::OF_Append; |
| 1076 | std::error_code EC; |
| 1077 | auto StatS = |
| 1078 | std::make_unique<llvm::raw_fd_ostream>(args&: StatsFile, args&: EC, args&: FileFlags); |
| 1079 | if (EC) { |
| 1080 | getDiagnostics().Report(DiagID: diag::warn_fe_unable_to_open_stats_file) |
| 1081 | << StatsFile << EC.message(); |
| 1082 | } else { |
| 1083 | llvm::PrintStatisticsJSON(OS&: *StatS); |
| 1084 | } |
| 1085 | } |
| 1086 | |
| 1087 | return !getDiagnostics().getClient()->getNumErrors(); |
| 1088 | } |
| 1089 | |
| 1090 | void CompilerInstance::printDiagnosticStats() { |
| 1091 | if (!getDiagnosticOpts().ShowCarets) |
| 1092 | return; |
| 1093 | |
| 1094 | raw_ostream &OS = getVerboseOutputStream(); |
| 1095 | |
| 1096 | // We can have multiple diagnostics sharing one diagnostic client. |
| 1097 | // Get the total number of warnings/errors from the client. |
| 1098 | unsigned NumWarnings = getDiagnostics().getClient()->getNumWarnings(); |
| 1099 | unsigned NumErrors = getDiagnostics().getClient()->getNumErrors(); |
| 1100 | |
| 1101 | if (NumWarnings) |
| 1102 | OS << NumWarnings << " warning" << (NumWarnings == 1 ? "" : "s" ); |
| 1103 | if (NumWarnings && NumErrors) |
| 1104 | OS << " and " ; |
| 1105 | if (NumErrors) |
| 1106 | OS << NumErrors << " error" << (NumErrors == 1 ? "" : "s" ); |
| 1107 | if (NumWarnings || NumErrors) { |
| 1108 | OS << " generated" ; |
| 1109 | if (getLangOpts().CUDA) { |
| 1110 | if (!getLangOpts().CUDAIsDevice) { |
| 1111 | OS << " when compiling for host" ; |
| 1112 | } else { |
| 1113 | OS << " when compiling for " << getTargetOpts().CPU; |
| 1114 | } |
| 1115 | } |
| 1116 | OS << ".\n" ; |
| 1117 | } |
| 1118 | } |
| 1119 | |
| 1120 | void CompilerInstance::LoadRequestedPlugins() { |
| 1121 | // Load any requested plugins. |
| 1122 | for (const std::string &Path : getFrontendOpts().Plugins) { |
| 1123 | std::string Error; |
| 1124 | if (llvm::sys::DynamicLibrary::LoadLibraryPermanently(Filename: Path.c_str(), ErrMsg: &Error)) |
| 1125 | getDiagnostics().Report(DiagID: diag::err_fe_unable_to_load_plugin) |
| 1126 | << Path << Error; |
| 1127 | } |
| 1128 | |
| 1129 | // Check if any of the loaded plugins replaces the main AST action |
| 1130 | for (const FrontendPluginRegistry::entry &Plugin : |
| 1131 | FrontendPluginRegistry::entries()) { |
| 1132 | std::unique_ptr<PluginASTAction> P(Plugin.instantiate()); |
| 1133 | if (P->getActionType() == PluginASTAction::ReplaceAction) { |
| 1134 | getFrontendOpts().ProgramAction = clang::frontend::PluginAction; |
| 1135 | getFrontendOpts().ActionName = Plugin.getName().str(); |
| 1136 | break; |
| 1137 | } |
| 1138 | } |
| 1139 | } |
| 1140 | |
| 1141 | /// Determine the appropriate source input kind based on language |
| 1142 | /// options. |
| 1143 | static Language getLanguageFromOptions(const LangOptions &LangOpts) { |
| 1144 | if (LangOpts.OpenCL) |
| 1145 | return Language::OpenCL; |
| 1146 | if (LangOpts.CUDA) |
| 1147 | return Language::CUDA; |
| 1148 | if (LangOpts.ObjC) |
| 1149 | return LangOpts.CPlusPlus ? Language::ObjCXX : Language::ObjC; |
| 1150 | return LangOpts.CPlusPlus ? Language::CXX : Language::C; |
| 1151 | } |
| 1152 | |
| 1153 | std::unique_ptr<CompilerInstance> CompilerInstance::cloneForModuleCompileImpl( |
| 1154 | SourceLocation ImportLoc, StringRef ModuleName, FrontendInputFile Input, |
| 1155 | StringRef OriginalModuleMapFile, StringRef ModuleFileName, |
| 1156 | std::optional<ThreadSafeCloneConfig> ThreadSafeConfig) { |
| 1157 | // Construct a compiler invocation for creating this module. |
| 1158 | auto Invocation = std::make_shared<CompilerInvocation>(args&: getInvocation()); |
| 1159 | |
| 1160 | PreprocessorOptions &PPOpts = Invocation->getPreprocessorOpts(); |
| 1161 | |
| 1162 | // For any options that aren't intended to affect how a module is built, |
| 1163 | // reset them to their default values. |
| 1164 | Invocation->resetNonModularOptions(); |
| 1165 | |
| 1166 | // Remove any macro definitions that are explicitly ignored by the module. |
| 1167 | // They aren't supposed to affect how the module is built anyway. |
| 1168 | HeaderSearchOptions &HSOpts = Invocation->getHeaderSearchOpts(); |
| 1169 | llvm::erase_if(C&: PPOpts.Macros, |
| 1170 | P: [&HSOpts](const std::pair<std::string, bool> &def) { |
| 1171 | StringRef MacroDef = def.first; |
| 1172 | return HSOpts.ModulesIgnoreMacros.contains( |
| 1173 | key: llvm::CachedHashString(MacroDef.split(Separator: '=').first)); |
| 1174 | }); |
| 1175 | |
| 1176 | // If the original compiler invocation had -fmodule-name, pass it through. |
| 1177 | Invocation->getLangOpts().ModuleName = |
| 1178 | getInvocation().getLangOpts().ModuleName; |
| 1179 | |
| 1180 | // Note the name of the module we're building. |
| 1181 | Invocation->getLangOpts().CurrentModule = std::string(ModuleName); |
| 1182 | |
| 1183 | // If there is a module map file, build the module using the module map. |
| 1184 | // Set up the inputs/outputs so that we build the module from its umbrella |
| 1185 | // header. |
| 1186 | FrontendOptions &FrontendOpts = Invocation->getFrontendOpts(); |
| 1187 | FrontendOpts.OutputFile = ModuleFileName.str(); |
| 1188 | FrontendOpts.DisableFree = false; |
| 1189 | FrontendOpts.GenerateGlobalModuleIndex = false; |
| 1190 | FrontendOpts.BuildingImplicitModule = true; |
| 1191 | FrontendOpts.OriginalModuleMap = std::string(OriginalModuleMapFile); |
| 1192 | // Force implicitly-built modules to hash the content of the module file. |
| 1193 | HSOpts.ModulesHashContent = true; |
| 1194 | FrontendOpts.Inputs = {std::move(Input)}; |
| 1195 | |
| 1196 | // Don't free the remapped file buffers; they are owned by our caller. |
| 1197 | PPOpts.RetainRemappedFileBuffers = true; |
| 1198 | |
| 1199 | DiagnosticOptions &DiagOpts = Invocation->getDiagnosticOpts(); |
| 1200 | |
| 1201 | DiagOpts.VerifyDiagnostics = 0; |
| 1202 | assert(getInvocation().getModuleHash() == Invocation->getModuleHash() && |
| 1203 | "Module hash mismatch!" ); |
| 1204 | |
| 1205 | // Construct a compiler instance that will be used to actually create the |
| 1206 | // module. Since we're sharing an in-memory module cache, |
| 1207 | // CompilerInstance::CompilerInstance is responsible for finalizing the |
| 1208 | // buffers to prevent use-after-frees. |
| 1209 | auto InstancePtr = std::make_unique<CompilerInstance>( |
| 1210 | args: std::move(Invocation), args: getPCHContainerOperations(), args: &getModuleCache()); |
| 1211 | auto &Instance = *InstancePtr; |
| 1212 | |
| 1213 | auto &Inv = Instance.getInvocation(); |
| 1214 | |
| 1215 | if (ThreadSafeConfig) { |
| 1216 | Instance.createFileManager(VFS: ThreadSafeConfig->getVFS()); |
| 1217 | } else if (FrontendOpts.ModulesShareFileManager) { |
| 1218 | Instance.setFileManager(&getFileManager()); |
| 1219 | } else { |
| 1220 | Instance.createFileManager(VFS: &getVirtualFileSystem()); |
| 1221 | } |
| 1222 | |
| 1223 | if (ThreadSafeConfig) { |
| 1224 | Instance.createDiagnostics(VFS&: Instance.getVirtualFileSystem(), |
| 1225 | Client: &ThreadSafeConfig->getDiagConsumer(), |
| 1226 | /*ShouldOwnClient=*/false); |
| 1227 | } else { |
| 1228 | Instance.createDiagnostics( |
| 1229 | VFS&: Instance.getVirtualFileSystem(), |
| 1230 | Client: new ForwardingDiagnosticConsumer(getDiagnosticClient()), |
| 1231 | /*ShouldOwnClient=*/true); |
| 1232 | } |
| 1233 | if (llvm::is_contained(Range&: DiagOpts.SystemHeaderWarningsModules, Element: ModuleName)) |
| 1234 | Instance.getDiagnostics().setSuppressSystemWarnings(false); |
| 1235 | |
| 1236 | Instance.createSourceManager(FileMgr&: Instance.getFileManager()); |
| 1237 | SourceManager &SourceMgr = Instance.getSourceManager(); |
| 1238 | |
| 1239 | if (ThreadSafeConfig) { |
| 1240 | // Detecting cycles in the module graph is responsibility of the client. |
| 1241 | } else { |
| 1242 | // Note that this module is part of the module build stack, so that we |
| 1243 | // can detect cycles in the module graph. |
| 1244 | SourceMgr.setModuleBuildStack(getSourceManager().getModuleBuildStack()); |
| 1245 | SourceMgr.pushModuleBuildStack( |
| 1246 | moduleName: ModuleName, importLoc: FullSourceLoc(ImportLoc, getSourceManager())); |
| 1247 | } |
| 1248 | |
| 1249 | // Make a copy for the new instance. |
| 1250 | Instance.FailedModules = FailedModules; |
| 1251 | |
| 1252 | if (GetDependencyDirectives) |
| 1253 | Instance.GetDependencyDirectives = |
| 1254 | GetDependencyDirectives->cloneFor(FileMgr&: Instance.getFileManager()); |
| 1255 | |
| 1256 | if (ThreadSafeConfig) { |
| 1257 | Instance.setModuleDepCollector(ThreadSafeConfig->getModuleDepCollector()); |
| 1258 | } else { |
| 1259 | // If we're collecting module dependencies, we need to share a collector |
| 1260 | // between all of the module CompilerInstances. Other than that, we don't |
| 1261 | // want to produce any dependency output from the module build. |
| 1262 | Instance.setModuleDepCollector(getModuleDepCollector()); |
| 1263 | } |
| 1264 | Inv.getDependencyOutputOpts() = DependencyOutputOptions(); |
| 1265 | |
| 1266 | return InstancePtr; |
| 1267 | } |
| 1268 | |
| 1269 | bool CompilerInstance::compileModule(SourceLocation ImportLoc, |
| 1270 | StringRef ModuleName, |
| 1271 | StringRef ModuleFileName, |
| 1272 | CompilerInstance &Instance) { |
| 1273 | llvm::TimeTraceScope TimeScope("Module Compile" , ModuleName); |
| 1274 | |
| 1275 | // Never compile a module that's already finalized - this would cause the |
| 1276 | // existing module to be freed, causing crashes if it is later referenced |
| 1277 | if (getModuleCache().getInMemoryModuleCache().isPCMFinal(Filename: ModuleFileName)) { |
| 1278 | getDiagnostics().Report(Loc: ImportLoc, DiagID: diag::err_module_rebuild_finalized) |
| 1279 | << ModuleName; |
| 1280 | return false; |
| 1281 | } |
| 1282 | |
| 1283 | getDiagnostics().Report(Loc: ImportLoc, DiagID: diag::remark_module_build) |
| 1284 | << ModuleName << ModuleFileName; |
| 1285 | |
| 1286 | // Execute the action to actually build the module in-place. Use a separate |
| 1287 | // thread so that we get a stack large enough. |
| 1288 | bool Crashed = !llvm::CrashRecoveryContext().RunSafelyOnNewStack( |
| 1289 | [&]() { |
| 1290 | GenerateModuleFromModuleMapAction Action; |
| 1291 | Instance.ExecuteAction(Act&: Action); |
| 1292 | }, |
| 1293 | RequestedStackSize: DesiredStackSize); |
| 1294 | |
| 1295 | getDiagnostics().Report(Loc: ImportLoc, DiagID: diag::remark_module_build_done) |
| 1296 | << ModuleName; |
| 1297 | |
| 1298 | // Propagate the statistics to the parent FileManager. |
| 1299 | if (!getFrontendOpts().ModulesShareFileManager) |
| 1300 | getFileManager().AddStats(Other: Instance.getFileManager()); |
| 1301 | |
| 1302 | // Propagate the failed modules to the parent instance. |
| 1303 | FailedModules = std::move(Instance.FailedModules); |
| 1304 | |
| 1305 | if (Crashed) { |
| 1306 | // Clear the ASTConsumer if it hasn't been already, in case it owns streams |
| 1307 | // that must be closed before clearing output files. |
| 1308 | Instance.setSema(nullptr); |
| 1309 | Instance.setASTConsumer(nullptr); |
| 1310 | |
| 1311 | // Delete any remaining temporary files related to Instance. |
| 1312 | Instance.clearOutputFiles(/*EraseFiles=*/true); |
| 1313 | } |
| 1314 | |
| 1315 | // We've rebuilt a module. If we're allowed to generate or update the global |
| 1316 | // module index, record that fact in the importing compiler instance. |
| 1317 | if (getFrontendOpts().GenerateGlobalModuleIndex) { |
| 1318 | setBuildGlobalModuleIndex(true); |
| 1319 | } |
| 1320 | |
| 1321 | // If \p AllowPCMWithCompilerErrors is set return 'success' even if errors |
| 1322 | // occurred. |
| 1323 | return !Instance.getDiagnostics().hasErrorOccurred() || |
| 1324 | Instance.getFrontendOpts().AllowPCMWithCompilerErrors; |
| 1325 | } |
| 1326 | |
| 1327 | static OptionalFileEntryRef getPublicModuleMap(FileEntryRef File, |
| 1328 | FileManager &FileMgr) { |
| 1329 | StringRef Filename = llvm::sys::path::filename(path: File.getName()); |
| 1330 | SmallString<128> PublicFilename(File.getDir().getName()); |
| 1331 | if (Filename == "module_private.map" ) |
| 1332 | llvm::sys::path::append(path&: PublicFilename, a: "module.map" ); |
| 1333 | else if (Filename == "module.private.modulemap" ) |
| 1334 | llvm::sys::path::append(path&: PublicFilename, a: "module.modulemap" ); |
| 1335 | else |
| 1336 | return std::nullopt; |
| 1337 | return FileMgr.getOptionalFileRef(Filename: PublicFilename); |
| 1338 | } |
| 1339 | |
| 1340 | std::unique_ptr<CompilerInstance> CompilerInstance::cloneForModuleCompile( |
| 1341 | SourceLocation ImportLoc, Module *Module, StringRef ModuleFileName, |
| 1342 | std::optional<ThreadSafeCloneConfig> ThreadSafeConfig) { |
| 1343 | StringRef ModuleName = Module->getTopLevelModuleName(); |
| 1344 | |
| 1345 | InputKind IK(getLanguageFromOptions(LangOpts: getLangOpts()), InputKind::ModuleMap); |
| 1346 | |
| 1347 | // Get or create the module map that we'll use to build this module. |
| 1348 | ModuleMap &ModMap = getPreprocessor().getHeaderSearchInfo().getModuleMap(); |
| 1349 | SourceManager &SourceMgr = getSourceManager(); |
| 1350 | |
| 1351 | if (FileID ModuleMapFID = ModMap.getContainingModuleMapFileID(Module); |
| 1352 | ModuleMapFID.isValid()) { |
| 1353 | // We want to use the top-level module map. If we don't, the compiling |
| 1354 | // instance may think the containing module map is a top-level one, while |
| 1355 | // the importing instance knows it's included from a parent module map via |
| 1356 | // the extern directive. This mismatch could bite us later. |
| 1357 | SourceLocation Loc = SourceMgr.getIncludeLoc(FID: ModuleMapFID); |
| 1358 | while (Loc.isValid() && isModuleMap(CK: SourceMgr.getFileCharacteristic(Loc))) { |
| 1359 | ModuleMapFID = SourceMgr.getFileID(SpellingLoc: Loc); |
| 1360 | Loc = SourceMgr.getIncludeLoc(FID: ModuleMapFID); |
| 1361 | } |
| 1362 | |
| 1363 | OptionalFileEntryRef ModuleMapFile = |
| 1364 | SourceMgr.getFileEntryRefForID(FID: ModuleMapFID); |
| 1365 | assert(ModuleMapFile && "Top-level module map with no FileID" ); |
| 1366 | |
| 1367 | // Canonicalize compilation to start with the public module map. This is |
| 1368 | // vital for submodules declarations in the private module maps to be |
| 1369 | // correctly parsed when depending on a top level module in the public one. |
| 1370 | if (OptionalFileEntryRef PublicMMFile = |
| 1371 | getPublicModuleMap(File: *ModuleMapFile, FileMgr&: getFileManager())) |
| 1372 | ModuleMapFile = PublicMMFile; |
| 1373 | |
| 1374 | StringRef ModuleMapFilePath = ModuleMapFile->getNameAsRequested(); |
| 1375 | |
| 1376 | // Use the systemness of the module map as parsed instead of using the |
| 1377 | // IsSystem attribute of the module. If the module has [system] but the |
| 1378 | // module map is not in a system path, then this would incorrectly parse |
| 1379 | // any other modules in that module map as system too. |
| 1380 | const SrcMgr::SLocEntry &SLoc = SourceMgr.getSLocEntry(FID: ModuleMapFID); |
| 1381 | bool IsSystem = isSystem(CK: SLoc.getFile().getFileCharacteristic()); |
| 1382 | |
| 1383 | // Use the module map where this module resides. |
| 1384 | return cloneForModuleCompileImpl( |
| 1385 | ImportLoc, ModuleName, |
| 1386 | Input: FrontendInputFile(ModuleMapFilePath, IK, IsSystem), |
| 1387 | OriginalModuleMapFile: ModMap.getModuleMapFileForUniquing(M: Module)->getName(), ModuleFileName, |
| 1388 | ThreadSafeConfig: std::move(ThreadSafeConfig)); |
| 1389 | } |
| 1390 | |
| 1391 | // FIXME: We only need to fake up an input file here as a way of |
| 1392 | // transporting the module's directory to the module map parser. We should |
| 1393 | // be able to do that more directly, and parse from a memory buffer without |
| 1394 | // inventing this file. |
| 1395 | SmallString<128> FakeModuleMapFile(Module->Directory->getName()); |
| 1396 | llvm::sys::path::append(path&: FakeModuleMapFile, a: "__inferred_module.map" ); |
| 1397 | |
| 1398 | std::string InferredModuleMapContent; |
| 1399 | llvm::raw_string_ostream OS(InferredModuleMapContent); |
| 1400 | Module->print(OS); |
| 1401 | |
| 1402 | auto Instance = cloneForModuleCompileImpl( |
| 1403 | ImportLoc, ModuleName, |
| 1404 | Input: FrontendInputFile(FakeModuleMapFile, IK, +Module->IsSystem), |
| 1405 | OriginalModuleMapFile: ModMap.getModuleMapFileForUniquing(M: Module)->getName(), ModuleFileName, |
| 1406 | ThreadSafeConfig: std::move(ThreadSafeConfig)); |
| 1407 | |
| 1408 | std::unique_ptr<llvm::MemoryBuffer> ModuleMapBuffer = |
| 1409 | llvm::MemoryBuffer::getMemBufferCopy(InputData: InferredModuleMapContent); |
| 1410 | FileEntryRef ModuleMapFile = Instance->getFileManager().getVirtualFileRef( |
| 1411 | Filename: FakeModuleMapFile, Size: InferredModuleMapContent.size(), ModificationTime: 0); |
| 1412 | Instance->getSourceManager().overrideFileContents(SourceFile: ModuleMapFile, |
| 1413 | Buffer: std::move(ModuleMapBuffer)); |
| 1414 | |
| 1415 | return Instance; |
| 1416 | } |
| 1417 | |
| 1418 | /// Read the AST right after compiling the module. |
| 1419 | static bool readASTAfterCompileModule(CompilerInstance &ImportingInstance, |
| 1420 | SourceLocation ImportLoc, |
| 1421 | SourceLocation ModuleNameLoc, |
| 1422 | Module *Module, StringRef ModuleFileName, |
| 1423 | bool *OutOfDate, bool *Missing) { |
| 1424 | DiagnosticsEngine &Diags = ImportingInstance.getDiagnostics(); |
| 1425 | |
| 1426 | unsigned ModuleLoadCapabilities = ASTReader::ARR_Missing; |
| 1427 | if (OutOfDate) |
| 1428 | ModuleLoadCapabilities |= ASTReader::ARR_OutOfDate; |
| 1429 | |
| 1430 | // Try to read the module file, now that we've compiled it. |
| 1431 | ASTReader::ASTReadResult ReadResult = |
| 1432 | ImportingInstance.getASTReader()->ReadAST( |
| 1433 | FileName: ModuleFileName, Type: serialization::MK_ImplicitModule, ImportLoc, |
| 1434 | ClientLoadCapabilities: ModuleLoadCapabilities); |
| 1435 | if (ReadResult == ASTReader::Success) |
| 1436 | return true; |
| 1437 | |
| 1438 | // The caller wants to handle out-of-date failures. |
| 1439 | if (OutOfDate && ReadResult == ASTReader::OutOfDate) { |
| 1440 | *OutOfDate = true; |
| 1441 | return false; |
| 1442 | } |
| 1443 | |
| 1444 | // The caller wants to handle missing module files. |
| 1445 | if (Missing && ReadResult == ASTReader::Missing) { |
| 1446 | *Missing = true; |
| 1447 | return false; |
| 1448 | } |
| 1449 | |
| 1450 | // The ASTReader didn't diagnose the error, so conservatively report it. |
| 1451 | if (ReadResult == ASTReader::Missing || !Diags.hasErrorOccurred()) |
| 1452 | Diags.Report(Loc: ModuleNameLoc, DiagID: diag::err_module_not_built) |
| 1453 | << Module->Name << SourceRange(ImportLoc, ModuleNameLoc); |
| 1454 | |
| 1455 | return false; |
| 1456 | } |
| 1457 | |
| 1458 | /// Compile a module in a separate compiler instance and read the AST, |
| 1459 | /// returning true if the module compiles without errors. |
| 1460 | static bool compileModuleAndReadASTImpl(CompilerInstance &ImportingInstance, |
| 1461 | SourceLocation ImportLoc, |
| 1462 | SourceLocation ModuleNameLoc, |
| 1463 | Module *Module, |
| 1464 | StringRef ModuleFileName) { |
| 1465 | auto Instance = ImportingInstance.cloneForModuleCompile(ImportLoc: ModuleNameLoc, Module, |
| 1466 | ModuleFileName); |
| 1467 | |
| 1468 | if (!ImportingInstance.compileModule(ImportLoc: ModuleNameLoc, |
| 1469 | ModuleName: Module->getTopLevelModuleName(), |
| 1470 | ModuleFileName, Instance&: *Instance)) { |
| 1471 | ImportingInstance.getDiagnostics().Report(Loc: ModuleNameLoc, |
| 1472 | DiagID: diag::err_module_not_built) |
| 1473 | << Module->Name << SourceRange(ImportLoc, ModuleNameLoc); |
| 1474 | return false; |
| 1475 | } |
| 1476 | |
| 1477 | return readASTAfterCompileModule(ImportingInstance, ImportLoc, ModuleNameLoc, |
| 1478 | Module, ModuleFileName, |
| 1479 | /*OutOfDate=*/nullptr, /*Missing=*/nullptr); |
| 1480 | } |
| 1481 | |
| 1482 | /// Compile a module in a separate compiler instance and read the AST, |
| 1483 | /// returning true if the module compiles without errors, using a lock manager |
| 1484 | /// to avoid building the same module in multiple compiler instances. |
| 1485 | /// |
| 1486 | /// Uses a lock file manager and exponential backoff to reduce the chances that |
| 1487 | /// multiple instances will compete to create the same module. On timeout, |
| 1488 | /// deletes the lock file in order to avoid deadlock from crashing processes or |
| 1489 | /// bugs in the lock file manager. |
| 1490 | static bool compileModuleAndReadASTBehindLock( |
| 1491 | CompilerInstance &ImportingInstance, SourceLocation ImportLoc, |
| 1492 | SourceLocation ModuleNameLoc, Module *Module, StringRef ModuleFileName) { |
| 1493 | DiagnosticsEngine &Diags = ImportingInstance.getDiagnostics(); |
| 1494 | |
| 1495 | Diags.Report(Loc: ModuleNameLoc, DiagID: diag::remark_module_lock) |
| 1496 | << ModuleFileName << Module->Name; |
| 1497 | |
| 1498 | auto &ModuleCache = ImportingInstance.getModuleCache(); |
| 1499 | ModuleCache.prepareForGetLock(ModuleFilename: ModuleFileName); |
| 1500 | |
| 1501 | while (true) { |
| 1502 | auto Lock = ModuleCache.getLock(ModuleFilename: ModuleFileName); |
| 1503 | bool Owned; |
| 1504 | if (llvm::Error Err = Lock->tryLock().moveInto(Value&: Owned)) { |
| 1505 | // ModuleCache takes care of correctness and locks are only necessary for |
| 1506 | // performance. Fallback to building the module in case of any lock |
| 1507 | // related errors. |
| 1508 | Diags.Report(Loc: ModuleNameLoc, DiagID: diag::remark_module_lock_failure) |
| 1509 | << Module->Name << toString(E: std::move(Err)); |
| 1510 | return compileModuleAndReadASTImpl(ImportingInstance, ImportLoc, |
| 1511 | ModuleNameLoc, Module, ModuleFileName); |
| 1512 | } |
| 1513 | if (Owned) { |
| 1514 | // We're responsible for building the module ourselves. |
| 1515 | return compileModuleAndReadASTImpl(ImportingInstance, ImportLoc, |
| 1516 | ModuleNameLoc, Module, ModuleFileName); |
| 1517 | } |
| 1518 | |
| 1519 | // Someone else is responsible for building the module. Wait for them to |
| 1520 | // finish. |
| 1521 | switch (Lock->waitForUnlockFor(MaxSeconds: std::chrono::seconds(90))) { |
| 1522 | case llvm::WaitForUnlockResult::Success: |
| 1523 | break; // The interesting case. |
| 1524 | case llvm::WaitForUnlockResult::OwnerDied: |
| 1525 | continue; // try again to get the lock. |
| 1526 | case llvm::WaitForUnlockResult::Timeout: |
| 1527 | // Since the InMemoryModuleCache takes care of correctness, we try waiting |
| 1528 | // for someone else to complete the build so that it does not happen |
| 1529 | // twice. In case of timeout, build it ourselves. |
| 1530 | Diags.Report(Loc: ModuleNameLoc, DiagID: diag::remark_module_lock_timeout) |
| 1531 | << Module->Name; |
| 1532 | // Clear the lock file so that future invocations can make progress. |
| 1533 | Lock->unsafeMaybeUnlock(); |
| 1534 | continue; |
| 1535 | } |
| 1536 | |
| 1537 | // Read the module that was just written by someone else. |
| 1538 | bool OutOfDate = false; |
| 1539 | bool Missing = false; |
| 1540 | if (readASTAfterCompileModule(ImportingInstance, ImportLoc, ModuleNameLoc, |
| 1541 | Module, ModuleFileName, OutOfDate: &OutOfDate, Missing: &Missing)) |
| 1542 | return true; |
| 1543 | if (!OutOfDate && !Missing) |
| 1544 | return false; |
| 1545 | |
| 1546 | // The module may be missing or out of date in the presence of file system |
| 1547 | // races. It may also be out of date if one of its imports depends on header |
| 1548 | // search paths that are not consistent with this ImportingInstance. |
| 1549 | // Try again... |
| 1550 | } |
| 1551 | } |
| 1552 | |
| 1553 | /// Compile a module in a separate compiler instance and read the AST, |
| 1554 | /// returning true if the module compiles without errors, potentially using a |
| 1555 | /// lock manager to avoid building the same module in multiple compiler |
| 1556 | /// instances. |
| 1557 | static bool compileModuleAndReadAST(CompilerInstance &ImportingInstance, |
| 1558 | SourceLocation ImportLoc, |
| 1559 | SourceLocation ModuleNameLoc, |
| 1560 | Module *Module, StringRef ModuleFileName) { |
| 1561 | return ImportingInstance.getInvocation() |
| 1562 | .getFrontendOpts() |
| 1563 | .BuildingImplicitModuleUsesLock |
| 1564 | ? compileModuleAndReadASTBehindLock(ImportingInstance, ImportLoc, |
| 1565 | ModuleNameLoc, Module, |
| 1566 | ModuleFileName) |
| 1567 | : compileModuleAndReadASTImpl(ImportingInstance, ImportLoc, |
| 1568 | ModuleNameLoc, Module, |
| 1569 | ModuleFileName); |
| 1570 | } |
| 1571 | |
| 1572 | /// Diagnose differences between the current definition of the given |
| 1573 | /// configuration macro and the definition provided on the command line. |
| 1574 | static void checkConfigMacro(Preprocessor &PP, StringRef ConfigMacro, |
| 1575 | Module *Mod, SourceLocation ImportLoc) { |
| 1576 | IdentifierInfo *Id = PP.getIdentifierInfo(Name: ConfigMacro); |
| 1577 | SourceManager &SourceMgr = PP.getSourceManager(); |
| 1578 | |
| 1579 | // If this identifier has never had a macro definition, then it could |
| 1580 | // not have changed. |
| 1581 | if (!Id->hadMacroDefinition()) |
| 1582 | return; |
| 1583 | auto *LatestLocalMD = PP.getLocalMacroDirectiveHistory(II: Id); |
| 1584 | |
| 1585 | // Find the macro definition from the command line. |
| 1586 | MacroInfo *CmdLineDefinition = nullptr; |
| 1587 | for (auto *MD = LatestLocalMD; MD; MD = MD->getPrevious()) { |
| 1588 | // We only care about the predefines buffer. |
| 1589 | FileID FID = SourceMgr.getFileID(SpellingLoc: MD->getLocation()); |
| 1590 | if (FID.isInvalid() || FID != PP.getPredefinesFileID()) |
| 1591 | continue; |
| 1592 | if (auto *DMD = dyn_cast<DefMacroDirective>(Val: MD)) |
| 1593 | CmdLineDefinition = DMD->getMacroInfo(); |
| 1594 | break; |
| 1595 | } |
| 1596 | |
| 1597 | auto *CurrentDefinition = PP.getMacroInfo(II: Id); |
| 1598 | if (CurrentDefinition == CmdLineDefinition) { |
| 1599 | // Macro matches. Nothing to do. |
| 1600 | } else if (!CurrentDefinition) { |
| 1601 | // This macro was defined on the command line, then #undef'd later. |
| 1602 | // Complain. |
| 1603 | PP.Diag(Loc: ImportLoc, DiagID: diag::warn_module_config_macro_undef) |
| 1604 | << true << ConfigMacro << Mod->getFullModuleName(); |
| 1605 | auto LatestDef = LatestLocalMD->getDefinition(); |
| 1606 | assert(LatestDef.isUndefined() && |
| 1607 | "predefined macro went away with no #undef?" ); |
| 1608 | PP.Diag(Loc: LatestDef.getUndefLocation(), DiagID: diag::note_module_def_undef_here) |
| 1609 | << true; |
| 1610 | return; |
| 1611 | } else if (!CmdLineDefinition) { |
| 1612 | // There was no definition for this macro in the predefines buffer, |
| 1613 | // but there was a local definition. Complain. |
| 1614 | PP.Diag(Loc: ImportLoc, DiagID: diag::warn_module_config_macro_undef) |
| 1615 | << false << ConfigMacro << Mod->getFullModuleName(); |
| 1616 | PP.Diag(Loc: CurrentDefinition->getDefinitionLoc(), |
| 1617 | DiagID: diag::note_module_def_undef_here) |
| 1618 | << false; |
| 1619 | } else if (!CurrentDefinition->isIdenticalTo(Other: *CmdLineDefinition, PP, |
| 1620 | /*Syntactically=*/true)) { |
| 1621 | // The macro definitions differ. |
| 1622 | PP.Diag(Loc: ImportLoc, DiagID: diag::warn_module_config_macro_undef) |
| 1623 | << false << ConfigMacro << Mod->getFullModuleName(); |
| 1624 | PP.Diag(Loc: CurrentDefinition->getDefinitionLoc(), |
| 1625 | DiagID: diag::note_module_def_undef_here) |
| 1626 | << false; |
| 1627 | } |
| 1628 | } |
| 1629 | |
| 1630 | static void checkConfigMacros(Preprocessor &PP, Module *M, |
| 1631 | SourceLocation ImportLoc) { |
| 1632 | clang::Module *TopModule = M->getTopLevelModule(); |
| 1633 | for (const StringRef ConMacro : TopModule->ConfigMacros) { |
| 1634 | checkConfigMacro(PP, ConfigMacro: ConMacro, Mod: M, ImportLoc); |
| 1635 | } |
| 1636 | } |
| 1637 | |
| 1638 | /// Write a new timestamp file with the given path. |
| 1639 | static void writeTimestampFile(StringRef TimestampFile) { |
| 1640 | std::error_code EC; |
| 1641 | llvm::raw_fd_ostream Out(TimestampFile.str(), EC, llvm::sys::fs::OF_None); |
| 1642 | } |
| 1643 | |
| 1644 | /// Prune the module cache of modules that haven't been accessed in |
| 1645 | /// a long time. |
| 1646 | static void (const HeaderSearchOptions &HSOpts) { |
| 1647 | llvm::sys::fs::file_status StatBuf; |
| 1648 | llvm::SmallString<128> TimestampFile; |
| 1649 | TimestampFile = HSOpts.ModuleCachePath; |
| 1650 | assert(!TimestampFile.empty()); |
| 1651 | llvm::sys::path::append(path&: TimestampFile, a: "modules.timestamp" ); |
| 1652 | |
| 1653 | // Try to stat() the timestamp file. |
| 1654 | if (std::error_code EC = llvm::sys::fs::status(path: TimestampFile, result&: StatBuf)) { |
| 1655 | // If the timestamp file wasn't there, create one now. |
| 1656 | if (EC == std::errc::no_such_file_or_directory) { |
| 1657 | writeTimestampFile(TimestampFile); |
| 1658 | } |
| 1659 | return; |
| 1660 | } |
| 1661 | |
| 1662 | // Check whether the time stamp is older than our pruning interval. |
| 1663 | // If not, do nothing. |
| 1664 | time_t TimeStampModTime = |
| 1665 | llvm::sys::toTimeT(TP: StatBuf.getLastModificationTime()); |
| 1666 | time_t CurrentTime = time(timer: nullptr); |
| 1667 | if (CurrentTime - TimeStampModTime <= time_t(HSOpts.ModuleCachePruneInterval)) |
| 1668 | return; |
| 1669 | |
| 1670 | // Write a new timestamp file so that nobody else attempts to prune. |
| 1671 | // There is a benign race condition here, if two Clang instances happen to |
| 1672 | // notice at the same time that the timestamp is out-of-date. |
| 1673 | writeTimestampFile(TimestampFile); |
| 1674 | |
| 1675 | // Walk the entire module cache, looking for unused module files and module |
| 1676 | // indices. |
| 1677 | std::error_code EC; |
| 1678 | for (llvm::sys::fs::directory_iterator Dir(HSOpts.ModuleCachePath, EC), |
| 1679 | DirEnd; |
| 1680 | Dir != DirEnd && !EC; Dir.increment(ec&: EC)) { |
| 1681 | // If we don't have a directory, there's nothing to look into. |
| 1682 | if (!llvm::sys::fs::is_directory(Path: Dir->path())) |
| 1683 | continue; |
| 1684 | |
| 1685 | // Walk all of the files within this directory. |
| 1686 | for (llvm::sys::fs::directory_iterator File(Dir->path(), EC), FileEnd; |
| 1687 | File != FileEnd && !EC; File.increment(ec&: EC)) { |
| 1688 | // We only care about module and global module index files. |
| 1689 | StringRef Extension = llvm::sys::path::extension(path: File->path()); |
| 1690 | if (Extension != ".pcm" && Extension != ".timestamp" && |
| 1691 | llvm::sys::path::filename(path: File->path()) != "modules.idx" ) |
| 1692 | continue; |
| 1693 | |
| 1694 | // Look at this file. If we can't stat it, there's nothing interesting |
| 1695 | // there. |
| 1696 | if (llvm::sys::fs::status(path: File->path(), result&: StatBuf)) |
| 1697 | continue; |
| 1698 | |
| 1699 | // If the file has been used recently enough, leave it there. |
| 1700 | time_t FileAccessTime = llvm::sys::toTimeT(TP: StatBuf.getLastAccessedTime()); |
| 1701 | if (CurrentTime - FileAccessTime <= |
| 1702 | time_t(HSOpts.ModuleCachePruneAfter)) { |
| 1703 | continue; |
| 1704 | } |
| 1705 | |
| 1706 | // Remove the file. |
| 1707 | llvm::sys::fs::remove(path: File->path()); |
| 1708 | |
| 1709 | // Remove the timestamp file. |
| 1710 | std::string TimpestampFilename = File->path() + ".timestamp" ; |
| 1711 | llvm::sys::fs::remove(path: TimpestampFilename); |
| 1712 | } |
| 1713 | |
| 1714 | // If we removed all of the files in the directory, remove the directory |
| 1715 | // itself. |
| 1716 | if (llvm::sys::fs::directory_iterator(Dir->path(), EC) == |
| 1717 | llvm::sys::fs::directory_iterator() && !EC) |
| 1718 | llvm::sys::fs::remove(path: Dir->path()); |
| 1719 | } |
| 1720 | } |
| 1721 | |
| 1722 | void CompilerInstance::createASTReader() { |
| 1723 | if (TheASTReader) |
| 1724 | return; |
| 1725 | |
| 1726 | if (!hasASTContext()) |
| 1727 | createASTContext(); |
| 1728 | |
| 1729 | // If we're implicitly building modules but not currently recursively |
| 1730 | // building a module, check whether we need to prune the module cache. |
| 1731 | if (getSourceManager().getModuleBuildStack().empty() && |
| 1732 | !getPreprocessor().getHeaderSearchInfo().getModuleCachePath().empty() && |
| 1733 | getHeaderSearchOpts().ModuleCachePruneInterval > 0 && |
| 1734 | getHeaderSearchOpts().ModuleCachePruneAfter > 0) { |
| 1735 | pruneModuleCache(HSOpts: getHeaderSearchOpts()); |
| 1736 | } |
| 1737 | |
| 1738 | HeaderSearchOptions &HSOpts = getHeaderSearchOpts(); |
| 1739 | std::string Sysroot = HSOpts.Sysroot; |
| 1740 | const PreprocessorOptions &PPOpts = getPreprocessorOpts(); |
| 1741 | const FrontendOptions &FEOpts = getFrontendOpts(); |
| 1742 | std::unique_ptr<llvm::Timer> ReadTimer; |
| 1743 | |
| 1744 | if (timerGroup) |
| 1745 | ReadTimer = std::make_unique<llvm::Timer>(args: "reading_modules" , |
| 1746 | args: "Reading modules" , args&: *timerGroup); |
| 1747 | TheASTReader = new ASTReader( |
| 1748 | getPreprocessor(), getModuleCache(), &getASTContext(), |
| 1749 | getPCHContainerReader(), getFrontendOpts().ModuleFileExtensions, |
| 1750 | Sysroot.empty() ? "" : Sysroot.c_str(), |
| 1751 | PPOpts.DisablePCHOrModuleValidation, |
| 1752 | /*AllowASTWithCompilerErrors=*/FEOpts.AllowPCMWithCompilerErrors, |
| 1753 | /*AllowConfigurationMismatch=*/false, HSOpts.ModulesValidateSystemHeaders, |
| 1754 | HSOpts.ModulesForceValidateUserHeaders, |
| 1755 | HSOpts.ValidateASTInputFilesContent, |
| 1756 | getFrontendOpts().UseGlobalModuleIndex, std::move(ReadTimer)); |
| 1757 | if (hasASTConsumer()) { |
| 1758 | TheASTReader->setDeserializationListener( |
| 1759 | Listener: getASTConsumer().GetASTDeserializationListener()); |
| 1760 | getASTContext().setASTMutationListener( |
| 1761 | getASTConsumer().GetASTMutationListener()); |
| 1762 | } |
| 1763 | getASTContext().setExternalSource(TheASTReader); |
| 1764 | if (hasSema()) |
| 1765 | TheASTReader->InitializeSema(S&: getSema()); |
| 1766 | if (hasASTConsumer()) |
| 1767 | TheASTReader->StartTranslationUnit(Consumer: &getASTConsumer()); |
| 1768 | |
| 1769 | for (auto &Listener : DependencyCollectors) |
| 1770 | Listener->attachToASTReader(R&: *TheASTReader); |
| 1771 | } |
| 1772 | |
| 1773 | bool CompilerInstance::loadModuleFile( |
| 1774 | StringRef FileName, serialization::ModuleFile *&LoadedModuleFile) { |
| 1775 | llvm::Timer Timer; |
| 1776 | if (timerGroup) |
| 1777 | Timer.init(TimerName: "preloading." + FileName.str(), TimerDescription: "Preloading " + FileName.str(), |
| 1778 | tg&: *timerGroup); |
| 1779 | llvm::TimeRegion TimeLoading(timerGroup ? &Timer : nullptr); |
| 1780 | |
| 1781 | // If we don't already have an ASTReader, create one now. |
| 1782 | if (!TheASTReader) |
| 1783 | createASTReader(); |
| 1784 | |
| 1785 | // If -Wmodule-file-config-mismatch is mapped as an error or worse, allow the |
| 1786 | // ASTReader to diagnose it, since it can produce better errors that we can. |
| 1787 | bool ConfigMismatchIsRecoverable = |
| 1788 | getDiagnostics().getDiagnosticLevel(DiagID: diag::warn_module_config_mismatch, |
| 1789 | Loc: SourceLocation()) |
| 1790 | <= DiagnosticsEngine::Warning; |
| 1791 | |
| 1792 | auto Listener = std::make_unique<ReadModuleNames>(args&: *PP); |
| 1793 | auto &ListenerRef = *Listener; |
| 1794 | ASTReader::ListenerScope ReadModuleNamesListener(*TheASTReader, |
| 1795 | std::move(Listener)); |
| 1796 | |
| 1797 | // Try to load the module file. |
| 1798 | switch (TheASTReader->ReadAST( |
| 1799 | FileName, Type: serialization::MK_ExplicitModule, ImportLoc: SourceLocation(), |
| 1800 | ClientLoadCapabilities: ConfigMismatchIsRecoverable ? ASTReader::ARR_ConfigurationMismatch : 0, |
| 1801 | NewLoadedModuleFile: &LoadedModuleFile)) { |
| 1802 | case ASTReader::Success: |
| 1803 | // We successfully loaded the module file; remember the set of provided |
| 1804 | // modules so that we don't try to load implicit modules for them. |
| 1805 | ListenerRef.registerAll(); |
| 1806 | return true; |
| 1807 | |
| 1808 | case ASTReader::ConfigurationMismatch: |
| 1809 | // Ignore unusable module files. |
| 1810 | getDiagnostics().Report(Loc: SourceLocation(), DiagID: diag::warn_module_config_mismatch) |
| 1811 | << FileName; |
| 1812 | // All modules provided by any files we tried and failed to load are now |
| 1813 | // unavailable; includes of those modules should now be handled textually. |
| 1814 | ListenerRef.markAllUnavailable(); |
| 1815 | return true; |
| 1816 | |
| 1817 | default: |
| 1818 | return false; |
| 1819 | } |
| 1820 | } |
| 1821 | |
| 1822 | namespace { |
| 1823 | enum ModuleSource { |
| 1824 | MS_ModuleNotFound, |
| 1825 | MS_ModuleCache, |
| 1826 | MS_PrebuiltModulePath, |
| 1827 | MS_ModuleBuildPragma |
| 1828 | }; |
| 1829 | } // end namespace |
| 1830 | |
| 1831 | /// Select a source for loading the named module and compute the filename to |
| 1832 | /// load it from. |
| 1833 | static ModuleSource selectModuleSource( |
| 1834 | Module *M, StringRef ModuleName, std::string &ModuleFilename, |
| 1835 | const std::map<std::string, std::string, std::less<>> &BuiltModules, |
| 1836 | HeaderSearch &HS) { |
| 1837 | assert(ModuleFilename.empty() && "Already has a module source?" ); |
| 1838 | |
| 1839 | // Check to see if the module has been built as part of this compilation |
| 1840 | // via a module build pragma. |
| 1841 | auto BuiltModuleIt = BuiltModules.find(x: ModuleName); |
| 1842 | if (BuiltModuleIt != BuiltModules.end()) { |
| 1843 | ModuleFilename = BuiltModuleIt->second; |
| 1844 | return MS_ModuleBuildPragma; |
| 1845 | } |
| 1846 | |
| 1847 | // Try to load the module from the prebuilt module path. |
| 1848 | const HeaderSearchOptions &HSOpts = HS.getHeaderSearchOpts(); |
| 1849 | if (!HSOpts.PrebuiltModuleFiles.empty() || |
| 1850 | !HSOpts.PrebuiltModulePaths.empty()) { |
| 1851 | ModuleFilename = HS.getPrebuiltModuleFileName(ModuleName); |
| 1852 | if (HSOpts.EnablePrebuiltImplicitModules && ModuleFilename.empty()) |
| 1853 | ModuleFilename = HS.getPrebuiltImplicitModuleFileName(Module: M); |
| 1854 | if (!ModuleFilename.empty()) |
| 1855 | return MS_PrebuiltModulePath; |
| 1856 | } |
| 1857 | |
| 1858 | // Try to load the module from the module cache. |
| 1859 | if (M) { |
| 1860 | ModuleFilename = HS.getCachedModuleFileName(Module: M); |
| 1861 | return MS_ModuleCache; |
| 1862 | } |
| 1863 | |
| 1864 | return MS_ModuleNotFound; |
| 1865 | } |
| 1866 | |
| 1867 | ModuleLoadResult CompilerInstance::findOrCompileModuleAndReadAST( |
| 1868 | StringRef ModuleName, SourceLocation ImportLoc, |
| 1869 | SourceLocation ModuleNameLoc, bool IsInclusionDirective) { |
| 1870 | // Search for a module with the given name. |
| 1871 | HeaderSearch &HS = PP->getHeaderSearchInfo(); |
| 1872 | Module *M = |
| 1873 | HS.lookupModule(ModuleName, ImportLoc, AllowSearch: true, AllowExtraModuleMapSearch: !IsInclusionDirective); |
| 1874 | |
| 1875 | // Check for any configuration macros that have changed. This is done |
| 1876 | // immediately before potentially building a module in case this module |
| 1877 | // depends on having one of its configuration macros defined to successfully |
| 1878 | // build. If this is not done the user will never see the warning. |
| 1879 | if (M) |
| 1880 | checkConfigMacros(PP&: getPreprocessor(), M, ImportLoc); |
| 1881 | |
| 1882 | // Select the source and filename for loading the named module. |
| 1883 | std::string ModuleFilename; |
| 1884 | ModuleSource Source = |
| 1885 | selectModuleSource(M, ModuleName, ModuleFilename, BuiltModules, HS); |
| 1886 | if (Source == MS_ModuleNotFound) { |
| 1887 | // We can't find a module, error out here. |
| 1888 | getDiagnostics().Report(Loc: ModuleNameLoc, DiagID: diag::err_module_not_found) |
| 1889 | << ModuleName << SourceRange(ImportLoc, ModuleNameLoc); |
| 1890 | return nullptr; |
| 1891 | } |
| 1892 | if (ModuleFilename.empty()) { |
| 1893 | if (M && M->HasIncompatibleModuleFile) { |
| 1894 | // We tried and failed to load a module file for this module. Fall |
| 1895 | // back to textual inclusion for its headers. |
| 1896 | return ModuleLoadResult::ConfigMismatch; |
| 1897 | } |
| 1898 | |
| 1899 | getDiagnostics().Report(Loc: ModuleNameLoc, DiagID: diag::err_module_build_disabled) |
| 1900 | << ModuleName; |
| 1901 | return nullptr; |
| 1902 | } |
| 1903 | |
| 1904 | // Create an ASTReader on demand. |
| 1905 | if (!getASTReader()) |
| 1906 | createASTReader(); |
| 1907 | |
| 1908 | // Time how long it takes to load the module. |
| 1909 | llvm::Timer Timer; |
| 1910 | if (timerGroup) |
| 1911 | Timer.init(TimerName: "loading." + ModuleFilename, TimerDescription: "Loading " + ModuleFilename, |
| 1912 | tg&: *timerGroup); |
| 1913 | llvm::TimeRegion TimeLoading(timerGroup ? &Timer : nullptr); |
| 1914 | llvm::TimeTraceScope TimeScope("Module Load" , ModuleName); |
| 1915 | |
| 1916 | // Try to load the module file. If we are not trying to load from the |
| 1917 | // module cache, we don't know how to rebuild modules. |
| 1918 | unsigned ARRFlags = Source == MS_ModuleCache |
| 1919 | ? ASTReader::ARR_OutOfDate | ASTReader::ARR_Missing | |
| 1920 | ASTReader::ARR_TreatModuleWithErrorsAsOutOfDate |
| 1921 | : Source == MS_PrebuiltModulePath |
| 1922 | ? 0 |
| 1923 | : ASTReader::ARR_ConfigurationMismatch; |
| 1924 | switch (getASTReader()->ReadAST(FileName: ModuleFilename, |
| 1925 | Type: Source == MS_PrebuiltModulePath |
| 1926 | ? serialization::MK_PrebuiltModule |
| 1927 | : Source == MS_ModuleBuildPragma |
| 1928 | ? serialization::MK_ExplicitModule |
| 1929 | : serialization::MK_ImplicitModule, |
| 1930 | ImportLoc, ClientLoadCapabilities: ARRFlags)) { |
| 1931 | case ASTReader::Success: { |
| 1932 | if (M) |
| 1933 | return M; |
| 1934 | assert(Source != MS_ModuleCache && |
| 1935 | "missing module, but file loaded from cache" ); |
| 1936 | |
| 1937 | // A prebuilt module is indexed as a ModuleFile; the Module does not exist |
| 1938 | // until the first call to ReadAST. Look it up now. |
| 1939 | M = HS.lookupModule(ModuleName, ImportLoc, AllowSearch: true, AllowExtraModuleMapSearch: !IsInclusionDirective); |
| 1940 | |
| 1941 | // Check whether M refers to the file in the prebuilt module path. |
| 1942 | if (M && M->getASTFile()) |
| 1943 | if (auto ModuleFile = FileMgr->getOptionalFileRef(Filename: ModuleFilename)) |
| 1944 | if (*ModuleFile == M->getASTFile()) |
| 1945 | return M; |
| 1946 | |
| 1947 | getDiagnostics().Report(Loc: ModuleNameLoc, DiagID: diag::err_module_prebuilt) |
| 1948 | << ModuleName; |
| 1949 | return ModuleLoadResult(); |
| 1950 | } |
| 1951 | |
| 1952 | case ASTReader::OutOfDate: |
| 1953 | case ASTReader::Missing: |
| 1954 | // The most interesting case. |
| 1955 | break; |
| 1956 | |
| 1957 | case ASTReader::ConfigurationMismatch: |
| 1958 | if (Source == MS_PrebuiltModulePath) |
| 1959 | // FIXME: We shouldn't be setting HadFatalFailure below if we only |
| 1960 | // produce a warning here! |
| 1961 | getDiagnostics().Report(Loc: SourceLocation(), |
| 1962 | DiagID: diag::warn_module_config_mismatch) |
| 1963 | << ModuleFilename; |
| 1964 | // Fall through to error out. |
| 1965 | [[fallthrough]]; |
| 1966 | case ASTReader::VersionMismatch: |
| 1967 | case ASTReader::HadErrors: |
| 1968 | ModuleLoader::HadFatalFailure = true; |
| 1969 | // FIXME: The ASTReader will already have complained, but can we shoehorn |
| 1970 | // that diagnostic information into a more useful form? |
| 1971 | return ModuleLoadResult(); |
| 1972 | |
| 1973 | case ASTReader::Failure: |
| 1974 | ModuleLoader::HadFatalFailure = true; |
| 1975 | return ModuleLoadResult(); |
| 1976 | } |
| 1977 | |
| 1978 | // ReadAST returned Missing or OutOfDate. |
| 1979 | if (Source != MS_ModuleCache) { |
| 1980 | // We don't know the desired configuration for this module and don't |
| 1981 | // necessarily even have a module map. Since ReadAST already produces |
| 1982 | // diagnostics for these two cases, we simply error out here. |
| 1983 | return ModuleLoadResult(); |
| 1984 | } |
| 1985 | |
| 1986 | // The module file is missing or out-of-date. Build it. |
| 1987 | assert(M && "missing module, but trying to compile for cache" ); |
| 1988 | |
| 1989 | // Check whether there is a cycle in the module graph. |
| 1990 | ModuleBuildStack ModPath = getSourceManager().getModuleBuildStack(); |
| 1991 | ModuleBuildStack::iterator Pos = ModPath.begin(), PosEnd = ModPath.end(); |
| 1992 | for (; Pos != PosEnd; ++Pos) { |
| 1993 | if (Pos->first == ModuleName) |
| 1994 | break; |
| 1995 | } |
| 1996 | |
| 1997 | if (Pos != PosEnd) { |
| 1998 | SmallString<256> CyclePath; |
| 1999 | for (; Pos != PosEnd; ++Pos) { |
| 2000 | CyclePath += Pos->first; |
| 2001 | CyclePath += " -> " ; |
| 2002 | } |
| 2003 | CyclePath += ModuleName; |
| 2004 | |
| 2005 | getDiagnostics().Report(Loc: ModuleNameLoc, DiagID: diag::err_module_cycle) |
| 2006 | << ModuleName << CyclePath; |
| 2007 | return nullptr; |
| 2008 | } |
| 2009 | |
| 2010 | // Check whether we have already attempted to build this module (but failed). |
| 2011 | if (FailedModules.contains(key: ModuleName)) { |
| 2012 | getDiagnostics().Report(Loc: ModuleNameLoc, DiagID: diag::err_module_not_built) |
| 2013 | << ModuleName << SourceRange(ImportLoc, ModuleNameLoc); |
| 2014 | return nullptr; |
| 2015 | } |
| 2016 | |
| 2017 | // Try to compile and then read the AST. |
| 2018 | if (!compileModuleAndReadAST(ImportingInstance&: *this, ImportLoc, ModuleNameLoc, Module: M, |
| 2019 | ModuleFileName: ModuleFilename)) { |
| 2020 | assert(getDiagnostics().hasErrorOccurred() && |
| 2021 | "undiagnosed error in compileModuleAndReadAST" ); |
| 2022 | FailedModules.insert(key: ModuleName); |
| 2023 | return nullptr; |
| 2024 | } |
| 2025 | |
| 2026 | // Okay, we've rebuilt and now loaded the module. |
| 2027 | return M; |
| 2028 | } |
| 2029 | |
| 2030 | ModuleLoadResult |
| 2031 | CompilerInstance::loadModule(SourceLocation ImportLoc, |
| 2032 | ModuleIdPath Path, |
| 2033 | Module::NameVisibilityKind Visibility, |
| 2034 | bool IsInclusionDirective) { |
| 2035 | // Determine what file we're searching from. |
| 2036 | StringRef ModuleName = Path[0].getIdentifierInfo()->getName(); |
| 2037 | SourceLocation ModuleNameLoc = Path[0].getLoc(); |
| 2038 | |
| 2039 | // If we've already handled this import, just return the cached result. |
| 2040 | // This one-element cache is important to eliminate redundant diagnostics |
| 2041 | // when both the preprocessor and parser see the same import declaration. |
| 2042 | if (ImportLoc.isValid() && LastModuleImportLoc == ImportLoc) { |
| 2043 | // Make the named module visible. |
| 2044 | if (LastModuleImportResult && ModuleName != getLangOpts().CurrentModule) |
| 2045 | TheASTReader->makeModuleVisible(Mod: LastModuleImportResult, NameVisibility: Visibility, |
| 2046 | ImportLoc); |
| 2047 | return LastModuleImportResult; |
| 2048 | } |
| 2049 | |
| 2050 | // If we don't already have information on this module, load the module now. |
| 2051 | Module *Module = nullptr; |
| 2052 | ModuleMap &MM = getPreprocessor().getHeaderSearchInfo().getModuleMap(); |
| 2053 | if (auto MaybeModule = MM.getCachedModuleLoad(II: *Path[0].getIdentifierInfo())) { |
| 2054 | // Use the cached result, which may be nullptr. |
| 2055 | Module = *MaybeModule; |
| 2056 | // Config macros are already checked before building a module, but they need |
| 2057 | // to be checked at each import location in case any of the config macros |
| 2058 | // have a new value at the current `ImportLoc`. |
| 2059 | if (Module) |
| 2060 | checkConfigMacros(PP&: getPreprocessor(), M: Module, ImportLoc); |
| 2061 | } else if (ModuleName == getLangOpts().CurrentModule) { |
| 2062 | // This is the module we're building. |
| 2063 | Module = PP->getHeaderSearchInfo().lookupModule( |
| 2064 | ModuleName, ImportLoc, /*AllowSearch*/ true, |
| 2065 | /*AllowExtraModuleMapSearch*/ !IsInclusionDirective); |
| 2066 | |
| 2067 | // Config macros do not need to be checked here for two reasons. |
| 2068 | // * This will always be textual inclusion, and thus the config macros |
| 2069 | // actually do impact the content of the header. |
| 2070 | // * `Preprocessor::HandleHeaderIncludeOrImport` will never call this |
| 2071 | // function as the `#include` or `#import` is textual. |
| 2072 | |
| 2073 | MM.cacheModuleLoad(II: *Path[0].getIdentifierInfo(), M: Module); |
| 2074 | } else { |
| 2075 | ModuleLoadResult Result = findOrCompileModuleAndReadAST( |
| 2076 | ModuleName, ImportLoc, ModuleNameLoc, IsInclusionDirective); |
| 2077 | if (!Result.isNormal()) |
| 2078 | return Result; |
| 2079 | if (!Result) |
| 2080 | DisableGeneratingGlobalModuleIndex = true; |
| 2081 | Module = Result; |
| 2082 | MM.cacheModuleLoad(II: *Path[0].getIdentifierInfo(), M: Module); |
| 2083 | } |
| 2084 | |
| 2085 | // If we never found the module, fail. Otherwise, verify the module and link |
| 2086 | // it up. |
| 2087 | if (!Module) |
| 2088 | return ModuleLoadResult(); |
| 2089 | |
| 2090 | // Verify that the rest of the module path actually corresponds to |
| 2091 | // a submodule. |
| 2092 | bool MapPrivateSubModToTopLevel = false; |
| 2093 | for (unsigned I = 1, N = Path.size(); I != N; ++I) { |
| 2094 | StringRef Name = Path[I].getIdentifierInfo()->getName(); |
| 2095 | clang::Module *Sub = Module->findSubmodule(Name); |
| 2096 | |
| 2097 | // If the user is requesting Foo.Private and it doesn't exist, try to |
| 2098 | // match Foo_Private and emit a warning asking for the user to write |
| 2099 | // @import Foo_Private instead. FIXME: remove this when existing clients |
| 2100 | // migrate off of Foo.Private syntax. |
| 2101 | if (!Sub && Name == "Private" && Module == Module->getTopLevelModule()) { |
| 2102 | SmallString<128> PrivateModule(Module->Name); |
| 2103 | PrivateModule.append(RHS: "_Private" ); |
| 2104 | |
| 2105 | SmallVector<IdentifierLoc, 2> PrivPath; |
| 2106 | auto &II = PP->getIdentifierTable().get( |
| 2107 | Name: PrivateModule, TokenCode: PP->getIdentifierInfo(Name: Module->Name)->getTokenID()); |
| 2108 | PrivPath.emplace_back(Args: Path[0].getLoc(), Args: &II); |
| 2109 | |
| 2110 | std::string FileName; |
| 2111 | // If there is a modulemap module or prebuilt module, load it. |
| 2112 | if (PP->getHeaderSearchInfo().lookupModule(ModuleName: PrivateModule, ImportLoc, AllowSearch: true, |
| 2113 | AllowExtraModuleMapSearch: !IsInclusionDirective) || |
| 2114 | selectModuleSource(M: nullptr, ModuleName: PrivateModule, ModuleFilename&: FileName, BuiltModules, |
| 2115 | HS&: PP->getHeaderSearchInfo()) != MS_ModuleNotFound) |
| 2116 | Sub = loadModule(ImportLoc, Path: PrivPath, Visibility, IsInclusionDirective); |
| 2117 | if (Sub) { |
| 2118 | MapPrivateSubModToTopLevel = true; |
| 2119 | PP->markClangModuleAsAffecting(M: Module); |
| 2120 | if (!getDiagnostics().isIgnored( |
| 2121 | DiagID: diag::warn_no_priv_submodule_use_toplevel, Loc: ImportLoc)) { |
| 2122 | getDiagnostics().Report(Loc: Path[I].getLoc(), |
| 2123 | DiagID: diag::warn_no_priv_submodule_use_toplevel) |
| 2124 | << Path[I].getIdentifierInfo() << Module->getFullModuleName() |
| 2125 | << PrivateModule |
| 2126 | << SourceRange(Path[0].getLoc(), Path[I].getLoc()) |
| 2127 | << FixItHint::CreateReplacement(RemoveRange: SourceRange(Path[0].getLoc()), |
| 2128 | Code: PrivateModule); |
| 2129 | getDiagnostics().Report(Loc: Sub->DefinitionLoc, |
| 2130 | DiagID: diag::note_private_top_level_defined); |
| 2131 | } |
| 2132 | } |
| 2133 | } |
| 2134 | |
| 2135 | if (!Sub) { |
| 2136 | // Attempt to perform typo correction to find a module name that works. |
| 2137 | SmallVector<StringRef, 2> Best; |
| 2138 | unsigned BestEditDistance = (std::numeric_limits<unsigned>::max)(); |
| 2139 | |
| 2140 | for (class Module *SubModule : Module->submodules()) { |
| 2141 | unsigned ED = |
| 2142 | Name.edit_distance(Other: SubModule->Name, |
| 2143 | /*AllowReplacements=*/true, MaxEditDistance: BestEditDistance); |
| 2144 | if (ED <= BestEditDistance) { |
| 2145 | if (ED < BestEditDistance) { |
| 2146 | Best.clear(); |
| 2147 | BestEditDistance = ED; |
| 2148 | } |
| 2149 | |
| 2150 | Best.push_back(Elt: SubModule->Name); |
| 2151 | } |
| 2152 | } |
| 2153 | |
| 2154 | // If there was a clear winner, user it. |
| 2155 | if (Best.size() == 1) { |
| 2156 | getDiagnostics().Report(Loc: Path[I].getLoc(), |
| 2157 | DiagID: diag::err_no_submodule_suggest) |
| 2158 | << Path[I].getIdentifierInfo() << Module->getFullModuleName() |
| 2159 | << Best[0] << SourceRange(Path[0].getLoc(), Path[I - 1].getLoc()) |
| 2160 | << FixItHint::CreateReplacement(RemoveRange: SourceRange(Path[I].getLoc()), |
| 2161 | Code: Best[0]); |
| 2162 | |
| 2163 | Sub = Module->findSubmodule(Name: Best[0]); |
| 2164 | } |
| 2165 | } |
| 2166 | |
| 2167 | if (!Sub) { |
| 2168 | // No submodule by this name. Complain, and don't look for further |
| 2169 | // submodules. |
| 2170 | getDiagnostics().Report(Loc: Path[I].getLoc(), DiagID: diag::err_no_submodule) |
| 2171 | << Path[I].getIdentifierInfo() << Module->getFullModuleName() |
| 2172 | << SourceRange(Path[0].getLoc(), Path[I - 1].getLoc()); |
| 2173 | break; |
| 2174 | } |
| 2175 | |
| 2176 | Module = Sub; |
| 2177 | } |
| 2178 | |
| 2179 | // Make the named module visible, if it's not already part of the module |
| 2180 | // we are parsing. |
| 2181 | if (ModuleName != getLangOpts().CurrentModule) { |
| 2182 | if (!Module->IsFromModuleFile && !MapPrivateSubModToTopLevel) { |
| 2183 | // We have an umbrella header or directory that doesn't actually include |
| 2184 | // all of the headers within the directory it covers. Complain about |
| 2185 | // this missing submodule and recover by forgetting that we ever saw |
| 2186 | // this submodule. |
| 2187 | // FIXME: Should we detect this at module load time? It seems fairly |
| 2188 | // expensive (and rare). |
| 2189 | getDiagnostics().Report(Loc: ImportLoc, DiagID: diag::warn_missing_submodule) |
| 2190 | << Module->getFullModuleName() |
| 2191 | << SourceRange(Path.front().getLoc(), Path.back().getLoc()); |
| 2192 | |
| 2193 | return ModuleLoadResult(Module, ModuleLoadResult::MissingExpected); |
| 2194 | } |
| 2195 | |
| 2196 | // Check whether this module is available. |
| 2197 | if (Preprocessor::checkModuleIsAvailable(LangOpts: getLangOpts(), TargetInfo: getTarget(), |
| 2198 | M: *Module, Diags&: getDiagnostics())) { |
| 2199 | getDiagnostics().Report(Loc: ImportLoc, DiagID: diag::note_module_import_here) |
| 2200 | << SourceRange(Path.front().getLoc(), Path.back().getLoc()); |
| 2201 | LastModuleImportLoc = ImportLoc; |
| 2202 | LastModuleImportResult = ModuleLoadResult(); |
| 2203 | return ModuleLoadResult(); |
| 2204 | } |
| 2205 | |
| 2206 | TheASTReader->makeModuleVisible(Mod: Module, NameVisibility: Visibility, ImportLoc); |
| 2207 | } |
| 2208 | |
| 2209 | // Resolve any remaining module using export_as for this one. |
| 2210 | getPreprocessor() |
| 2211 | .getHeaderSearchInfo() |
| 2212 | .getModuleMap() |
| 2213 | .resolveLinkAsDependencies(Mod: Module->getTopLevelModule()); |
| 2214 | |
| 2215 | LastModuleImportLoc = ImportLoc; |
| 2216 | LastModuleImportResult = ModuleLoadResult(Module); |
| 2217 | return LastModuleImportResult; |
| 2218 | } |
| 2219 | |
| 2220 | void CompilerInstance::createModuleFromSource(SourceLocation ImportLoc, |
| 2221 | StringRef ModuleName, |
| 2222 | StringRef Source) { |
| 2223 | // Avoid creating filenames with special characters. |
| 2224 | SmallString<128> CleanModuleName(ModuleName); |
| 2225 | for (auto &C : CleanModuleName) |
| 2226 | if (!isAlphanumeric(c: C)) |
| 2227 | C = '_'; |
| 2228 | |
| 2229 | // FIXME: Using a randomized filename here means that our intermediate .pcm |
| 2230 | // output is nondeterministic (as .pcm files refer to each other by name). |
| 2231 | // Can this affect the output in any way? |
| 2232 | SmallString<128> ModuleFileName; |
| 2233 | if (std::error_code EC = llvm::sys::fs::createTemporaryFile( |
| 2234 | Prefix: CleanModuleName, Suffix: "pcm" , ResultPath&: ModuleFileName)) { |
| 2235 | getDiagnostics().Report(Loc: ImportLoc, DiagID: diag::err_fe_unable_to_open_output) |
| 2236 | << ModuleFileName << EC.message(); |
| 2237 | return; |
| 2238 | } |
| 2239 | std::string ModuleMapFileName = (CleanModuleName + ".map" ).str(); |
| 2240 | |
| 2241 | FrontendInputFile Input( |
| 2242 | ModuleMapFileName, |
| 2243 | InputKind(getLanguageFromOptions(LangOpts: Invocation->getLangOpts()), |
| 2244 | InputKind::ModuleMap, /*Preprocessed*/true)); |
| 2245 | |
| 2246 | std::string NullTerminatedSource(Source.str()); |
| 2247 | |
| 2248 | auto Other = cloneForModuleCompileImpl(ImportLoc, ModuleName, Input, |
| 2249 | OriginalModuleMapFile: StringRef(), ModuleFileName); |
| 2250 | |
| 2251 | // Create a virtual file containing our desired source. |
| 2252 | // FIXME: We shouldn't need to do this. |
| 2253 | FileEntryRef ModuleMapFile = Other->getFileManager().getVirtualFileRef( |
| 2254 | Filename: ModuleMapFileName, Size: NullTerminatedSource.size(), ModificationTime: 0); |
| 2255 | Other->getSourceManager().overrideFileContents( |
| 2256 | SourceFile: ModuleMapFile, Buffer: llvm::MemoryBuffer::getMemBuffer(InputData: NullTerminatedSource)); |
| 2257 | |
| 2258 | Other->BuiltModules = std::move(BuiltModules); |
| 2259 | Other->DeleteBuiltModules = false; |
| 2260 | |
| 2261 | // Build the module, inheriting any modules that we've built locally. |
| 2262 | bool Success = compileModule(ImportLoc, ModuleName, ModuleFileName, Instance&: *Other); |
| 2263 | |
| 2264 | BuiltModules = std::move(Other->BuiltModules); |
| 2265 | |
| 2266 | if (Success) { |
| 2267 | BuiltModules[std::string(ModuleName)] = std::string(ModuleFileName); |
| 2268 | llvm::sys::RemoveFileOnSignal(Filename: ModuleFileName); |
| 2269 | } |
| 2270 | } |
| 2271 | |
| 2272 | void CompilerInstance::makeModuleVisible(Module *Mod, |
| 2273 | Module::NameVisibilityKind Visibility, |
| 2274 | SourceLocation ImportLoc) { |
| 2275 | if (!TheASTReader) |
| 2276 | createASTReader(); |
| 2277 | if (!TheASTReader) |
| 2278 | return; |
| 2279 | |
| 2280 | TheASTReader->makeModuleVisible(Mod, NameVisibility: Visibility, ImportLoc); |
| 2281 | } |
| 2282 | |
| 2283 | GlobalModuleIndex *CompilerInstance::loadGlobalModuleIndex( |
| 2284 | SourceLocation TriggerLoc) { |
| 2285 | if (getPreprocessor().getHeaderSearchInfo().getModuleCachePath().empty()) |
| 2286 | return nullptr; |
| 2287 | if (!TheASTReader) |
| 2288 | createASTReader(); |
| 2289 | // Can't do anything if we don't have the module manager. |
| 2290 | if (!TheASTReader) |
| 2291 | return nullptr; |
| 2292 | // Get an existing global index. This loads it if not already |
| 2293 | // loaded. |
| 2294 | TheASTReader->loadGlobalIndex(); |
| 2295 | GlobalModuleIndex *GlobalIndex = TheASTReader->getGlobalIndex(); |
| 2296 | // If the global index doesn't exist, create it. |
| 2297 | if (!GlobalIndex && shouldBuildGlobalModuleIndex() && hasFileManager() && |
| 2298 | hasPreprocessor()) { |
| 2299 | llvm::sys::fs::create_directories( |
| 2300 | path: getPreprocessor().getHeaderSearchInfo().getModuleCachePath()); |
| 2301 | if (llvm::Error Err = GlobalModuleIndex::writeIndex( |
| 2302 | FileMgr&: getFileManager(), PCHContainerRdr: getPCHContainerReader(), |
| 2303 | Path: getPreprocessor().getHeaderSearchInfo().getModuleCachePath())) { |
| 2304 | // FIXME this drops the error on the floor. This code is only used for |
| 2305 | // typo correction and drops more than just this one source of errors |
| 2306 | // (such as the directory creation failure above). It should handle the |
| 2307 | // error. |
| 2308 | consumeError(Err: std::move(Err)); |
| 2309 | return nullptr; |
| 2310 | } |
| 2311 | TheASTReader->resetForReload(); |
| 2312 | TheASTReader->loadGlobalIndex(); |
| 2313 | GlobalIndex = TheASTReader->getGlobalIndex(); |
| 2314 | } |
| 2315 | // For finding modules needing to be imported for fixit messages, |
| 2316 | // we need to make the global index cover all modules, so we do that here. |
| 2317 | if (!HaveFullGlobalModuleIndex && GlobalIndex && !buildingModule()) { |
| 2318 | ModuleMap &MMap = getPreprocessor().getHeaderSearchInfo().getModuleMap(); |
| 2319 | bool RecreateIndex = false; |
| 2320 | for (ModuleMap::module_iterator I = MMap.module_begin(), |
| 2321 | E = MMap.module_end(); I != E; ++I) { |
| 2322 | Module *TheModule = I->second; |
| 2323 | OptionalFileEntryRef Entry = TheModule->getASTFile(); |
| 2324 | if (!Entry) { |
| 2325 | SmallVector<IdentifierLoc, 2> Path; |
| 2326 | Path.emplace_back(Args&: TriggerLoc, |
| 2327 | Args: getPreprocessor().getIdentifierInfo(Name: TheModule->Name)); |
| 2328 | std::reverse(first: Path.begin(), last: Path.end()); |
| 2329 | // Load a module as hidden. This also adds it to the global index. |
| 2330 | loadModule(ImportLoc: TheModule->DefinitionLoc, Path, Visibility: Module::Hidden, IsInclusionDirective: false); |
| 2331 | RecreateIndex = true; |
| 2332 | } |
| 2333 | } |
| 2334 | if (RecreateIndex) { |
| 2335 | if (llvm::Error Err = GlobalModuleIndex::writeIndex( |
| 2336 | FileMgr&: getFileManager(), PCHContainerRdr: getPCHContainerReader(), |
| 2337 | Path: getPreprocessor().getHeaderSearchInfo().getModuleCachePath())) { |
| 2338 | // FIXME As above, this drops the error on the floor. |
| 2339 | consumeError(Err: std::move(Err)); |
| 2340 | return nullptr; |
| 2341 | } |
| 2342 | TheASTReader->resetForReload(); |
| 2343 | TheASTReader->loadGlobalIndex(); |
| 2344 | GlobalIndex = TheASTReader->getGlobalIndex(); |
| 2345 | } |
| 2346 | HaveFullGlobalModuleIndex = true; |
| 2347 | } |
| 2348 | return GlobalIndex; |
| 2349 | } |
| 2350 | |
| 2351 | // Check global module index for missing imports. |
| 2352 | bool |
| 2353 | CompilerInstance::lookupMissingImports(StringRef Name, |
| 2354 | SourceLocation TriggerLoc) { |
| 2355 | // Look for the symbol in non-imported modules, but only if an error |
| 2356 | // actually occurred. |
| 2357 | if (!buildingModule()) { |
| 2358 | // Load global module index, or retrieve a previously loaded one. |
| 2359 | GlobalModuleIndex *GlobalIndex = loadGlobalModuleIndex( |
| 2360 | TriggerLoc); |
| 2361 | |
| 2362 | // Only if we have a global index. |
| 2363 | if (GlobalIndex) { |
| 2364 | GlobalModuleIndex::HitSet FoundModules; |
| 2365 | |
| 2366 | // Find the modules that reference the identifier. |
| 2367 | // Note that this only finds top-level modules. |
| 2368 | // We'll let diagnoseTypo find the actual declaration module. |
| 2369 | if (GlobalIndex->lookupIdentifier(Name, Hits&: FoundModules)) |
| 2370 | return true; |
| 2371 | } |
| 2372 | } |
| 2373 | |
| 2374 | return false; |
| 2375 | } |
| 2376 | void CompilerInstance::resetAndLeakSema() { llvm::BuryPointer(Ptr: takeSema()); } |
| 2377 | |
| 2378 | void CompilerInstance::setExternalSemaSource( |
| 2379 | IntrusiveRefCntPtr<ExternalSemaSource> ESS) { |
| 2380 | ExternalSemaSrc = std::move(ESS); |
| 2381 | } |
| 2382 | |